TL;DR
The FastIC+ is a new 8-channel ASIC that brings high-precision digitization directly onto the chip for next-generation medical imaging. By integrating a low-jitter Time-to-Digital Converter (TDC), it achieves a record-breaking coincidence time resolution (CTR) of 85 ps—the first time a sub-100 ps CTR has been reported using on-chip digitization—all while maintaining a slim power profile of 12.5 mW per channel.
What Problem Does This Paper Address?
In Time-of-Flight Positron Emission Tomography (ToF-PET), timing is everything. By measuring the tiny difference in arrival times of two photons, scanners can pinpoint where a positron-electron annihilation occurred, leading to much clearer medical images. To push image quality further, researchers are chasing the "100 ps barrier" for Coincidence Time Resolution (CTR).
While high-end discrete electronics can reach this goal, they are bulky and power-hungry. Existing integrated circuits (ASICs) often provide only analog outputs, requiring external, complex systems to digitize the data. The challenge is to integrate the digitization (the TDC) directly onto the ASIC without the digital noise "bleeding" into the sensitive analog front-end and ruining the picosecond-level timing precision.
Methods
The authors developed the FastIC+, an evolution of their previous FastIC architecture, manufactured in a 65 nm CMOS process.
Key technical features include:
- On-Chip Digitization: It features an event-driven TDC based on a Phase-Locked Loop (PLL). The PLL runs at 1.28 GHz and generates 16 different phases, creating a fine time bin of just 24.4 ps.
- Triple-Branch Analog Front-End: Each channel splits the incoming sensor signal into three paths: "Time" (for arrival), "Energy" (using Time-over-Threshold), and "Trigger" (for event validation).
- Configurability: The chip can handle both positive and negative polarity sensors (like SiPMs, PMTs, or MCPs) and offers four different transmission modes depending on whether the user prioritizes energy resolution or data speed.
- Digital Backend: It includes FERO (Front-End Readout) and BERO (Back-End Readout) blocks that handle "de-bubbling" (correcting digital errors) and data serialization for transmission via a 1.28 Gbps link.
Datasets
The researchers evaluated the chip using several hardware configurations rather than standard software datasets:
- Sensors: Silicon Photomultipliers (SiPMs) from FBK (NUV-HD-MT series) and Hamamatsu (HPK S13360), ranging from 1x1 mm² to 4x4 mm².
- Scintillator Crystals: Various materials including LYSO:Ce,Ca (standard in PET) and Fast-LGSO (known for fast decay times), in sizes ranging from small 2x2x3 mm³ cubes to 20 mm long crystals.
- Calibration Tools: A 405 nm picosecond pulsed laser for Single-Photon Time Resolution (SPTR) and a $^{22}$Na radioactive source for Coincidence Time Resolution (CTR) tests.
Key Insights and Ideas
- The Digitization "Tax" is Low: One of the most significant findings is that adding on-chip digitization only increased power consumption by about 0.5 mW per channel (a 5% increase) compared to the analog-only version, without degrading the timing performance.
- Breaking the 100 ps Barrier: The integration of the TDC usually introduces "jitter" (timing uncertainty). However, the FastIC+ TDC jitter was measured at only 31.3 ps FWHM, which is small enough that the overall system timing remains dominated by the physics of the sensor and crystal, not the electronics.
- Scalability is the Goal: By moving digitization on-chip, the system architecture is vastly simplified. This makes it feasible to build whole-body PET scanners that require thousands of detector channels without needing massive racks of external digitizers.
Key Results
- Power Efficiency: 12.5 mW per channel, which is highly competitive for an ASIC with full digitization.
- Single-Photon Resolution: Achieved an SPTR of 98 ± 1 ps FWHM using a 3x3 mm² SiPM.
- Coincidence Timing (The Headline):
- With short LGSO crystals (2x2x3 mm³), they achieved a CTR of 85 ± 1 ps FWHM.
- With standard 20 mm long LYSO crystals, they achieved 130 ± 1 ps FWHM.
- Linearity: The TDC showed excellent linearity (DNL < 6 ps) even without complex calibration.
Limitations and Future Work
While the FastIC+ is a milestone for integrated PET electronics, the authors note a few areas for improvement:
- Power vs. Specialization: The chip is a "multipurpose" ASIC designed for high bandwidth (to support MCPs and PMTs). If optimized strictly for SiPMs in PET, the power consumption of the energy readout branch could likely be reduced further.
- The Noise Floor: High-frequency discrete (non-integrated) electronics still hold the absolute record for CTR (around 56 ps) because they have lower electronic noise than any current CMOS ASIC.
- Depth-of-Interaction (DOI): Future work will focus on using the FastIC+ in "dual-ended" readout systems (sensors on both ends of a crystal) to correct for the depth at which a photon hits the crystal, which currently limits timing in long crystals.
Summary updated