Beam Tilt Aberration Detection of the Seven-Unit Phased Fiber Laser Array

Yu Xin, Xingyue Wang, Jing Liang, Cai Liu, Xiaolong Ni, Suping Bai, Jiasu Li, Zeping Liu, Lijie HouMicromachines 2024 · DOI

TL;DR

This paper introduces a novel optical system for precisely detecting beam tilt aberrations in a seven-unit phased fiber laser array. By employing a co-aperture optical design and micro-nano optics, the system achieves high accuracy (within 7 µrad) and reduces algorithmic complexity, enabling direct measurement of beam tilt angles.

What Problem Does This Paper Address?

High-power fiber laser arrays are crucial for applications in manufacturing, defense, and research, offering a way to overcome the power limitations of single-beam lasers. However, combining multiple laser beams introduces challenges, particularly beam tilt aberrations. These aberrations, even small ones, can significantly degrade the quality and efficiency of the synthesized beam. Existing methods for detecting and correcting these tilts often suffer from complexity, low efficiency, or limited accuracy, especially for large tilt angles. This paper aims to address this gap by developing a more accurate, efficient, and direct method for measuring beam tilt aberrations in a multi-element fiber laser array.

Methods

The core of the proposed solution is a multi-stage optical system designed for precise beam tilt detection. Key components and principles include:

  • Co-aperture Optical Receiving Subsystem: This subsystem uses a Keplerian telescope to compress the incoming seven-beam laser array. It's designed to be apochromatic to handle multiple wavelengths (1064 nm, 1030 nm, and 633 nm) without introducing chromatic aberrations.
  • Relay Optical Subsystem: This stage further compresses the beam to match the requirements of subsequent detection modules.
  • Suboptical Axis Tilt Detection Subsystem: This is the heart of the tilt detection. It utilizes a microlens array positioned at the exit pupil of the relay subsystem. Each microlens samples a portion of the beam, and the displacement of the resulting spot on a CCD camera directly indicates the tilt angle of that sub-beam. This leverages the principle of conjugate imaging.
  • Beam Uniformity and Beam Quality Detection Subsystems: These modules work in parallel to assess other critical beam parameters, providing a comprehensive evaluation.
  • Micro-nano Optics and Conjugate Imaging: The system relies on micro-nano optical elements (like the microlens array) and the principle of conjugate imaging to accurately map beam tilt to spot displacement.
  • Squared Weighted Centroid Algorithm: This algorithm is used for processing the CCD images to accurately determine the spot positions, even if they deviate from a perfect Gaussian shape.

Datasets

Not discussed in the paper. The evaluation relies on experimental measurements and simulations of laser beam properties.

Key Insights and Ideas

  • Direct Tilt Measurement: The system moves beyond indirect methods (like using far-field bucket power) to directly measure the beam's tilt angle, simplifying the process and improving accuracy.
  • Micro-Nano Optics for Precision: The use of a microlens array is critical for segmenting the beam and enabling high-resolution detection of sub-beam tilt.
  • Apochromatic Design for Multispectral Capability: Designing the system to be apochromatic is essential for its application with lasers operating at different wavelengths, a common requirement in advanced laser systems.
  • Reduced Algorithmic Complexity: By directly measuring tilt, the system requires fewer iterations and simpler calculations compared to some existing methods, leading to higher computational efficiency.
  • Integrated System for Comprehensive Analysis: The system doesn't just measure tilt; it also assesses beam uniformity and quality, offering a holistic view of the synthesized beam's performance.

Key Results

  • High Detection Accuracy: The system achieved a maximum detection error of approximately 7 µrad for the seven-element system.
  • Sensitivity: A beam offset of just 1 pixel could be detected, corresponding to a beam tilt of about 0.7 µrad.
  • Beam Uniformity: The measured beam uniformity exceeded 0.75, meeting the specified requirement.
  • Beam Quality: The beam quality factor (β) was reported to be better than 1.4 times the diffraction limit, indicating good performance.
  • Inclination Detection Accuracy: The inclination detection accuracy for the seven laser beams was reported as 0.0006%.

Limitations and Future Work

  • Limitations: While the paper highlights the system's accuracy and efficiency, the specific limitations of the current seven-element array are not extensively detailed beyond the reported error margins. The complexity of manufacturing and aligning micro-nano optical components could be an implicit challenge.
  • Future Work: The authors suggest exploring the compatibility of the system with other atmospheric window bands. They also propose expanding the number of arrays to increase the detection aperture, indicating a path towards larger and more powerful laser systems.

Summary updated

Abstract

In this paper, we present a method based on the conjugate image principle and micro-nano optics to detect tilt aberrations of a phased fiber laser array system. A co-aperture optics system was adapted to detect the tilt aberrations of a seven-element phased fiber laser array system simultaneously. A Kepler telescope was designed to construct the conjugate relation between the exit pupil of a fiber optic laser array system and a microlens array and also to match the size of the seven beams and the microlens array. The apochromatic theory was used to meet the multispectral (1064 ± 0.3 nm, 1030 ± 0.3 nm, and 633 ± 0.2 nm) detection needs. A far-field detection unit was also designed to evaluate beam quality. When the actual beam was offset by 1 pixel, the beam tilt was about 0.7 µrad. The maximum detection error of the seven-element system was about 7 µrad. It could not only directly detect the beam's tilt angle but also maintained detection accuracy while reducing the algorithm complexity.
BibTeX
@inproceedings{xin2024beam,
  author = {Yu Xin and Xingyue Wang and Jing Liang and Cai Liu and Xiaolong Ni and Suping Bai and Jiasu Li and Zeping Liu and Lijie Hou},
  title = {{Beam Tilt Aberration Detection of the Seven-Unit Phased Fiber Laser Array}},
  booktitle = {Micromachines},
  year = {2024},
  doi = {10.3390/mi16010038},
}
Figure