Battery Friendly Internet of Medical Media Things Networks

Sandeep Pirbhulal, Ali Hassan Sodhro, Aicha Sekhari, Yacine Ouzrout, Wanqing WuInteriot/saseiot 2017 · DOI

TL;DR

This paper tackles the critical challenge of battery life in medical IoT devices, proposing an "ON-OFF Battery Friendly Algorithm" (OBFA) to significantly extend device longevity. By intelligently managing power consumption during medical data streaming, OBFA demonstrates a notable improvement in battery performance compared to conventional methods.

What Problem Does This Paper Address?

The proliferation of the Internet of Things (IoT) in healthcare, particularly through Wireless Body Sensor Networks (WBSNs), promises continuous patient monitoring and enhanced medical services. However, a major bottleneck is the limited battery life of these ubiquitous, often wearable or implantable, medical devices. These devices rely on constant communication to transmit sensitive health data (like ECGs), leading to rapid battery depletion and the need for frequent recharging. This limitation hinders their widespread and continuous deployment, especially in remote or resource-constrained environments. The paper addresses this by aiming to minimize battery charge consumption and prolong the operational lifetime of these medical IoT devices.

Methods

The core contribution of this paper is the design and evaluation of the ON-OFF Battery Friendly Algorithm (OBFA). OBFA operates by dynamically adjusting the average ECG packet transmission time based on the remaining idle time and the size of the data backlog. Instead of continuous transmission, OBFA employs an "ON-OFF" strategy, allowing for periods of inactivity. This idle time is crucial for battery recovery, where the battery can regain some charge. The algorithm aims to minimize current spikes by arranging current values from higher to lower orders and dynamically adjusting transmission times to avoid increasing current values.

The authors also propose a joint IoT and WBSN framework specifically for medical media transmission. This framework integrates various body sensors (ECG, blood pressure, etc.) with wireless communication technologies and the internet, culminating in data access via mobile devices or monitors.

A battery model is also discussed, based on the work of Rakhmatov et al., which accounts for the nonlinear behavior of batteries and includes parameters for charge state and discharge rate. This model is used to analyze the battery's cost function, which comprises consumed and unavailable charge.

Datasets

The paper utilizes ECG data sets from PhysioNet, described as a large database. These datasets are used for testing the proposed OBFA algorithm in the context of medical media streaming over joint IoT and WBSNs. The experimental analysis is conducted using MATLAB.

Key Insights and Ideas

  • Idle time is not just downtime; it's recovery time: The most significant insight is that strategically introducing idle periods in data transmission allows the battery to recover charge, significantly extending its overall lifetime. This is a departure from simply trying to reduce power consumption during active transmission.
  • Dynamic adjustment is key: OBFA's effectiveness stems from its ability to dynamically adapt transmission schedules based on real-time conditions (idle time, backlog size), rather than using a fixed transmission strategy.
  • Non-increasing current profiles are superior: The experimental results strongly suggest that a current profile that decreases over time leads to better battery performance and higher residual charge compared to initial or non-decreasing profiles.
  • Battery performance is application-dependent: The paper hints that battery performance isn't solely about minimizing energy consumption but also about how the application's discharge characteristics interact with the battery's behavior.

Key Results

The experimental results, using ECG data from PhysioNet, show that OBFA minimizes battery charge consumption and extends device lifetime compared to a conventional baseline algorithm. Specifically, the paper reports a 9.5% improvement in residual charge for a 40-minute data set duration when using a non-increasing current profile. The charge consumption for OBFA was 1051.07 mA.min, compared to 1068.70 mA.min for the baseline, resulting in a slightly higher remaining charge.

Limitations and Future Work

The authors acknowledge that their work is a preliminary analysis conducted with MATLAB. While they demonstrate the effectiveness of OBFA, further research is needed to explore its application in more complex and diverse wireless networking scenarios within IoT.

Future work is suggested to focus on research directions regarding energy conserving issues in wireless networking-based IoT. This implies a broader scope beyond just medical applications, aiming to generalize the principles of battery-friendly design for a wider range of IoT devices.

Summary updated

BibTeX
@inproceedings{pirbhulal2017battery,
  author = {Sandeep Pirbhulal and Ali Hassan Sodhro and Aicha Sekhari and Yacine Ouzrout and Wanqing Wu},
  title = {{Battery Friendly Internet of Medical Media Things Networks}},
  booktitle = {Interiot/saseiot},
  year = {2017},
  doi = {10.1007/978-3-319-93797-7\_2},
}
Figure