B02 Development of the Double-staged Stirling Cooler for Next Astronomy Satellite Missions

Yoichi Sato, Hiroyuki Sugita, Keisuke Shinozaki, Kazuhisa Mitsuda, Takao Nakagawa, Masahide Murakami, Shoji Tsunematsu, Kiyomi Ootsuka, Kenichi Kanao, Katsuhiro NarasakiThe Proceedings of the Symposium on Stirlling Cycle 2009 · DOI

Abstract

The 20K-class Double-staged Stirling cooler is a key cryogenic technology for cooling the optical detectors and telescopes of the highly-sophisticated astronomy satellite missions proposed by JAXA, for instance, the x-ray astronomy mission Astro-H (2013) and the cryogenic infrared telescope mission SPICA (2018). Therefore, it is required that the advanced double-staged Stirling cooler with improvement of mechanical reliability and cooling performance will be developed, based on the existing one onboard the first Japanese infrared astronomy mission Akari (2006) with cooling power of 200mW at 20K (90W power input). This paper describes about development status of the advanced double-staged Stirling cooler with cooling performance and long lifetime test.

Introduction

Deep-space observatories looking at X-rays or infrared light face a fundamental problem: heat. To detect faint signals from the distant universe, their sensors and telescopes must be kept at cryogenic temperatures, often below 20K. While JAXA successfully utilized a Stirling cooler on the Akari mission (2006), future missions like Astro-H (now known as Hitomi) and SPICA demanded higher cooling power, better efficiency, and extreme mechanical reliability for multi-year operations. The primary challenges are mechanical wear from friction in the piston/displacer and internal gas contamination that can freeze and clog the system.

Mechanical Design and Reliability

To address reliability, researchers moved away from traditional sliding seals. In the compressor, a twin-opposed linear motor with flexure springs supports the piston, enabling non-contact operation. For the cold head, sliding supports were replaced with flexure springs, and the seal part clearance was increased by 2.5x to minimize wear risk.

Schematic of the double-staged Stirling cooler showing the compressor and cold head components.

Contamination and Performance Testing

The team conducted "poisoning" experiments by introducing impurities like $CO_2$ and $N_2$ into the Helium ($^4He$) working gas. They discovered a "CO2 Cliff": concentrations exceeding 500ppmv cause the 1st stage temperature to spike as $CO_2$ solidifies at 146K inside the regenerator. $N_2$ contamination causes a more gradual performance decline.

Engineering Model (EM) testing involved mapping cooling power across environmental temperatures ranging from -70°C to 30°C. The Stirling cooler also serves as a vital "pre-cooler" for Joule-Thomson (JT) stages, which reach sub-2K temperatures.

Key Results

The improved cooler achieved 200mW of cooling at 17K (2nd stage) and 1W at 83.4K (1st stage) with a 90W power input. This meets the "End of Life" (EOL) specification of 200mW @ 20K with a comfortable margin for performance degradation over a long mission.

Cooling performance of the 2nd stage across a range of environmental temperatures and power inputs.

When integrated with a JT cooler, the system successfully reached 10mW @ 1.7K, proving its viability for the SPICA mission. At the time of reporting, the prototype had completed 3 months of continuous operation in a long-term life test.

Conclusion

JAXA has successfully upgraded its 20K-class double-staged Stirling cooler. By implementing non-contact flexure springs and establishing strict gas purity standards, the team has developed a robust system capable of meeting the rigorous demands of next-generation space observatories. Future work includes ongoing multi-year life testing and flight-model qualification for launch vibrations.

Summary updated

Abstract

The 20K-class Double-staged Stirling cooler is a key cryogenic technology for cooling the optical detectors and telescopes of the highly-sophisticated astronomy satellite missions proposed by JAXA, for instance, the x-ray astronomy mission Astro-H(2013) and the cryogenic infrared telescope mission SPICA(2018). Therefore, it is required that the advanced double-staged Stirling cooler with improvement of mechanical reliability and cooling performance will be developed, based on the existing one onboard the first Japanese infrared astronomy mission Akari(2006) with cooling power of 200mW at 20K (90W power input). This paper describes about development status of the advanced double-staged Stirling cooler with cooling performance and long lifetime test.
BibTeX
@inproceedings{sato2009b,
  author = {Yoichi Sato and Hiroyuki Sugita and Keisuke Shinozaki and Kazuhisa Mitsuda and Takao Nakagawa and Masahide Murakami and Shoji Tsunematsu and Kiyomi Ootsuka and Kenichi Kanao and Katsuhiro Narasaki},
  title = {{B02 Development of the Double-staged Stirling Cooler for Next Astronomy Satellite Missions}},
  booktitle = {The Proceedings of the Symposium on Stirlling Cycle},
  year = {2009},
  doi = {10.1299/jsmessc.2009.12.63},
}
Figure