Autonomous System for Head-to-Head Race: Design, Implementation, and Analysis; Team KAIST at the Indy Autonomous Challenge

Chanyoung Jung, Andrea Finazzi, Hyunki Seong, Daegyu Lee, Seung-Wook Lee, Bosung Kim, Gyuree Kang, David Hyunchul ShimIEEE Transactions on Field Robotics 2024 · DOI

Introduction

Autonomous vehicle (AV) research has traditionally prioritized safety and reliability in structured urban environments. However, the Indy Autonomous Challenge (IAC) shifts the focus to the "edge cases" of vehicle physics. This competition requires full-scale Dallara AV-21 race cars to compete head-to-head at speeds exceeding 220 km/h (136 mph). Team KAIST developed a resilient, full-stack autonomous racing system designed to handle the extreme dynamics, real-time constraints, and adversarial interactions inherent in high-speed racing.

Team KAIST with their Dallara AV-21 autonomous race cars at the track.

System Architecture and Methods

The KAIST autonomy stack is built on three core principles: dependability, evolvability, and performance.

System Status Manager (SSM)

The "brain" of the system's resilience is the System Status Manager. The SSM monitors the health of every software node in real-time. A critical feature is its ability to detect failures in primary GNSS-based localization using Mahalanobis distance. If the system becomes "unconfident" in its position, the SSM automatically triggers a degraded mode or an emergency perception-based controller to ensure vehicle safety.

Multi-modal Perception and Overtaking

To track opponents, the team utilized a fusion of LiDAR and Radar data processed through an Interacting Multiple Model (IMM) Unscented Kalman Filter (UKF) with Probabilistic Data Association Filter (PDAF). Notably, cameras were excluded from primary detection due to the difficulty of obtaining sufficient high-speed training data to ensure reliability.

For overtaking decisions, the team adapted Rendezvous Guidance (RG), a technique originally used for space docking. By projecting a "virtual target" ahead of an opponent, the system mathematically determines if a safe overtaking trajectory is physically feasible within the vehicle's current acceleration limits.

High-Frequency Control

To maintain stability at extreme speeds, the system employs an explicit Linear-Quadratic Regulator (LQR). To achieve a 100Hz control frequency, the Algebraic Riccati Equations were solved offline. The resulting gains are stored in a look-up table indexed by velocity, allowing for rapid, stable control without the computational overhead of online optimization.

Experimental Results

The system was validated using competition logs from the Indianapolis Motor Speedway (IMS) and Las Vegas Motor Speedway (LVMS), using rival team GPS logs as ground truth for perception accuracy.

  • Performance: The vehicle achieved a maximum solo speed of 227.2 km/h and maintained stability during head-to-head racing at 212.5 km/h.
  • Precision: Mean tracking error was limited to 0.3 meters at speeds over 150 km/h, though deviations reached 1.15m during aggressive cornering.
  • Latency: The control loop consistently operated under the 10ms target. LiDAR clustering was identified as the main computational bottleneck, averaging 10.5ms.
  • Reliability: Team KAIST was one of only three teams to complete the IAC events without a single accident, demonstrating the effectiveness of their hierarchical fail-safe architecture.

Discussion and Future Work

While successful, the system encountered "phantom braking" due to false positive detections of track walls. Future improvements will focus on more sophisticated geofencing and noise filtering. Additionally, the current overtaking logic assumes opponents maintain constant speed and lanes. Future iterations will incorporate game-theoretic models to predict and counter adversarial maneuvers in multi-car scenarios.

The team also noted a consistent "positive cross-track error" during high-speed turns, attributed to the asymmetrical "oval-track" suspension (camber) of the Dallara AV-21. This highlight the importance of high-fidelity hardware modeling in software-driven autonomous systems operating at the limit of performance.

Summary updated

Abstract

Autonomous racing has emerged as a promising field of research, attracting growing interest. In racing, vehicles operate at the limits of perception, planning, and control, raising unique research and engineering challenges. This article presents an overview ofthe autonomous racing system developed by team KAIST for the Indy Autonomous Challenge (IAC), as shownin <xref ref-type="fig" rid="fig1" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Fig. 1</xref>. The KAIST racing stack features multimodal perception modules, a high-speed overtaking planner, a resilient control system, and a system monitoring framework. We provide detailed insights into each component, including the algorithms, implementation, and evaluation results. Furthermore, the article presents design principles shaped by three years of high-speed autonomous racing experience, offering insights applicable to other safety-critical, high-risk robotics domains. Our autonomous system was integrated into a full-scale race car (Dallara AV-21) and extensively field-tested. As a result, team KAIST was one of only three teams to qualify for and compete in the official IAC races without incident. Our system successfully fulfilled all race objectives, including overtaking at speeds of up to 220 km/h in the IAC@CES2022, the world’s first autonomous head-to-head race.
BibTeX
@article{jung2024autonomous,
  author = {Chanyoung Jung and Andrea Finazzi and Hyunki Seong and Daegyu Lee and Seung-Wook Lee and Bosung Kim and Gyuree Kang and David Hyunchul Shim},
  title = {{Autonomous System for Head-to-Head Race: Design, Implementation, and Analysis; Team KAIST at the Indy Autonomous Challenge}},
  journal = {IEEE transactions on field robotics.},
  year = {2024},
  doi = {10.1109/tfr.2024.3497922},
}
Figure