Attitude fault-tolerant control method of launch vehicle based on composite learning and fixed time synchronization

Haipeng Chen, Yuan Zhang, Zimo Zhang, Wenxing Fu, Jie YanScientia 2025 · DOI

TL;DR

This paper introduces a novel attitude control strategy for launch vehicles that ensures all orientation errors vanish simultaneously within a guaranteed, fixed timeframe—even in the event of engine failures. By combining a Time-Synchronized Control (TSC) strategy with Composite Learning, the system achieves faster and more robust recovery from actuator faults and external atmospheric disturbances than traditional methods.

What Problem Does This Paper Address?

Controlling the "attitude" (orientation) of a rocket is a high-stakes balancing act. During flight, launch vehicles face intense external disturbances (like wind gusts) and the constant risk of actuator failures, such as a gimbaled nozzle losing efficiency or getting stuck at an offset (bias).

Current "finite-time" control methods have two major drawbacks:

  1. Initial Condition Dependency: The time it takes for the system to stabilize often depends on how large the initial error was.
  2. Asynchronous Convergence: Different axes (pitch, yaw, and roll) might stabilize at different speeds. If the roll axis stabilizes while the pitch is still oscillating, the resulting "coupling" effects can destabilize the entire vehicle.

The authors aim to create a controller where the recovery time is fixed (independent of the initial error) and synchronized (all axes reach the target state at the exact same moment).

Methods

The researchers developed a multi-layered control architecture:

  • Fixed-Time Fault Estimator: A specialized observer designed to identify actuator faults (both efficiency loss and bias) within a mathematically guaranteed time limit.
  • Time-Synchronized Control (TSC): Utilizing a "Norm-Normalized Sign Function" (NNSF), the authors designed a controller that forces the entire error vector to zero simultaneously. This prevents the "staggered" recovery seen in traditional controllers.
  • Composite Learning RBF Neural Network: Standard neural network controllers update their "knowledge" based only on tracking error (how far the rocket is from its path). This paper uses composite learning, which incorporates prediction error—the difference between the actual system state and a parallel internal model. This allows the network to learn the patterns of external disturbances much more accurately and rapidly.
  • Backstepping Framework: These components are integrated into a recursive "backstepping" design to ensure the stability of the entire non-linear system.

Datasets

As a theoretical control paper, the study relies on high-fidelity numerical simulations rather than external datasets.

  • Model: A six-engine launch vehicle model (based on parameters from existing literature).
  • Simulation Scenarios: The authors simulated a 60-second flight window. At $t=25s$, they introduced a $-2^\circ$ bias fault in a booster engine. At $t=35s$, they added a 25% efficiency loss fault. They also included complex external disturbances modeled as a mix of sine and cosine waves.

Key Insights and Ideas

  • The Power of "Snap": The core "aha moment" is the transition from finite-time to time-synchronized control. By forcing all states to converge at once, the controller eliminates the transient "wobble" caused by one axis trying to compensate for another that hasn't settled yet.
  • Learning from Mistakes (and Predictions): Most adaptive controllers are reactive. By adding prediction error to the neural network update law, the controller becomes more proactive, effectively "modeling" the disturbance rather than just fighting it.
  • Guaranteed Safety Margins: Because the convergence time is "fixed," mission planners can calculate the worst-case recovery time regardless of the severity of the turbulence or the size of the engine failure.

Key Results

  • Rapid Recovery: In simulations, attitude errors converged to zero within approximately 1.5 seconds of a major actuator fault.
  • Superior Precision: Compared to standard "Fixed-time sliding mode control," the proposed method showed significantly smaller transient spikes and reached a steady state with near-zero error.
  • Simultaneous Convergence: Visual data from the simulations confirmed that errors in pitch, yaw, and roll reached the equilibrium point at the exact same timestamp, validating the TSC theory.
  • Robustness: The system maintained stable flight even when faced with a 5% deviation in the vehicle's moment of inertia and thrust, proving it can handle "real-world" modeling inaccuracies.

Limitations and Future Work

While the results are promising, the authors acknowledge a few areas for growth:

  • Simulation vs. Reality: The current study is purely numerical. Real-world factors like sensor noise, communication latency, and the physical limits of how fast a nozzle can pivot (actuator saturation) need further exploration.
  • Complex Missions: The authors plan to test the algorithm against more complex mission profiles, such as vertical recovery (landing) of rocket stages.
  • Hardware-in-the-loop: The next logical step is moving from software simulations to "hardware-in-the-loop" testing to verify the computational efficiency of the composite learning algorithm on flight-grade processors.

Summary updated

Abstract

In this paper, an attitude fault-tolerant control method based on composite learning and fixed time convergence is designed to solve the attitude control problem of a launch vehicle with actuator failure and external interference. Firstly, the attitude control model and fault model of the launch vehicle are established to describe the attitude motion characteristics of the system in the case of fault and disturbance. Then, the convergence strategy of time synchronization is introduced, the fixed time synchronization fault estimator and controller are designed, and the stability is proved. By compensating for the additional disturbance with a disturbance estimator, a composite learning algorithm using tracking error and prediction error is constructed to deal with the influence of external disturbance on the control system. Compared with the traditional finite time control method, the time synchronization control strategy proposed in this paper can ensure that the attitude error of the system converges simultaneously in a fixed time, which can effectively enhance the overall response of the control system. Finally, the attitude tracking effect and fault tolerance of the proposed control strategy are verified by simulation.
BibTeX
@inproceedings{chen2025attitude,
  author = {Haipeng Chen and Yuan Zhang and Zimo Zhang and Wenxing Fu and Jie Yan},
  title = {{Attitude fault-tolerant control method of launch vehicle based on composite learning and fixed time synchronization}},
  booktitle = {Scientia},
  year = {2025},
  doi = {10.1360/ssi-2024-0381},
}
Figure