Atomic Dispersed Hetero-Pairs for Enhanced Electrocatalytic CO2 Reduction

Zhaoyong Jin, Meiqi Yang, Yilong Dong, Xingcheng Ma, Ying Wang, Jiandong Wu, Jinchang Fan, Dewen Wang, Rongshen Xi, Xiao Zhao, Tianyi Xu, Jingxiang Zhao, Lei Zhang, David J. Singh, Weitao Zheng, Xiaoqiang CuiNano-Micro 2023 · DOI

Introduction

Electrochemical carbon dioxide reduction ($CO_2RR$) is a critical technology for achieving carbon neutrality by converting greenhouse gases into value-added chemicals like carbon monoxide (CO). However, the efficiency of this process is often limited by the intrinsic properties of the catalysts used. A major hurdle is the "linear scaling relationship" between reaction intermediates, which prevents the simultaneous optimization of different reaction steps. In a recent study, researchers have introduced a novel approach using molybdenum-iron (Mo-Fe) atomic hetero-pairs to break these constraints and achieve record-breaking performance.

The Challenge: Linear Scaling Relationships

In the reduction of $CO_2$ to CO, the catalyst must navigate a complex energy landscape. First, it must strongly bind to the COOH intermediate to initiate the reaction. Subsequently, it must weakly bind to the resulting CO intermediate to allow the product to desorb and free up the active site.

In conventional single-atom catalysts, these two energies are positively correlated: a site that binds COOH strongly also tends to bind CO strongly. This "poisoning" of the active site creates a performance ceiling. Breaking this correlation is essential for developing high-performance catalysts.

The Solution: Mo-Fe Hetero-Pairs

The research team synthesized a catalyst featuring Mo-Fe di-atomic pairs anchored on a nitrogen-doped carbon support (MoFe–N–C). By using aberration-corrected HAADF-STEM and X-ray Absorption Fine Structure (XAFS) spectroscopy, they confirmed the formation of distinct Mo-Fe chemical bonds, rather than isolated single atoms or clusters.

Mechanistic Insights: Breaking the Correlation

The key to the catalyst's success lies in how it interacts with intermediates at the atomic level. Unlike single-atom sites, the Mo-Fe hetero-pair allows for "bridging adsorption."

Mechanism of breaking the scaling relationship through bridging adsorption and orbital coupling.

As shown in the figure above, the COOH intermediate binds across both metal atoms—the carbon atom anchors to the Mo site while the oxygen atom interacts with the Fe site. This dual-point attachment significantly increases the adsorption energy of COOH.

Simultaneously, d-d orbital coupling between the adjacent Mo and Fe atoms leads to electron delocalization. This electronic effect specifically facilitates the desorption of *CO from the Fe site. By decoupling these two steps, the Mo-Fe system circumvents the traditional scaling laws that plague single-metal catalysts.

Performance Results

The MoFe–N–C catalyst demonstrated exceptional electrocatalytic properties:

  • Turnover Frequency (TOF): It achieved a TOF of $3336.21\ h^{-1}$, which is 3.5 to 5.5 times higher than corresponding single-atom Mo or Fe catalysts.
  • Selectivity: The Faradaic efficiency for CO ($FE_{CO}$) reached $95.96\%$ at a low potential of $-0.60\ V$ (vs. RHE).
  • Stability: The catalyst maintained stable performance for over 100 hours of continuous operation, showcasing its potential for practical applications.

Conclusion and Outlook

This work demonstrates that atomic-scale engineering of hetero-pairs can effectively overcome the fundamental limitations of traditional catalysts. By providing multiple binding sites and tuning electronic structures through orbital coupling, researchers can design catalysts that are both highly active and selective. While this study focused on CO production, the strategy of using di-atomic pairs opens new avenues for exploring more complex multi-carbon ($C_{2+}$) products, which are vital for a sustainable chemical industry.

Summary updated

Abstract

Electrochemical carbon dioxide reduction reaction (CO<sub>2</sub>RR) involves a variety of intermediates with highly correlated reaction and ad-desorption energies, hindering optimization of the catalytic activity. For example, increasing the binding of the *COOH to the active site will generally increase the *CO desorption energy. Breaking this relationship may be expected to dramatically improve the intrinsic activity of CO<sub>2</sub>RR, but remains an unsolved challenge. Herein, we addressed this conundrum by constructing a unique atomic dispersed hetero-pair consisting of Mo-Fe di-atoms anchored on N-doped carbon carrier. This system shows an unprecedented CO<sub>2</sub>RR intrinsic activity with TOF of 3336 h<sup>-1</sup>, high selectivity toward CO production, Faradaic efficiency of 95.96% at - 0.60 V and excellent stability. Theoretical calculations show that the Mo-Fe diatomic sites increased the *COOH intermediate adsorption energy by bridging adsorption of *COOH intermediates. At the same time, d-d orbital coupling in the Mo-Fe di-atom results in electron delocalization and facilitates desorption of *CO intermediates. Thus, the undesirable correlation between these steps is broken. This work provides a promising approach, specifically the use of di-atoms, for breaking unfavorable relationships based on understanding of the catalytic mechanisms at the atomic scale.
BibTeX
@inproceedings{jin2023atomic,
  author = {Zhaoyong Jin and Meiqi Yang and Yilong Dong and Xingcheng Ma and Ying Wang and Jiandong Wu and Jinchang Fan and Dewen Wang and Rongshen Xi and Xiao Zhao and Tianyi Xu and Jingxiang Zhao and Lei Zhang and David J. Singh and Weitao Zheng and Xiaoqiang Cui},
  title = {{Atomic Dispersed Hetero-Pairs for Enhanced Electrocatalytic CO2 Reduction}},
  booktitle = {Nano-Micro},
  year = {2023},
  doi = {10.1007/s40820-023-01214-2},
}
Figure