Atmospheric pressure barrier discharge at high temperature: Diagnostics and carbon nanotubes deposition

Marek Eliáš, Petr Kloc, Ondřej Jašek, Věra Mazánková, David Trunec, Radim Hrdý, Lenka Zajı́čkováJournal of Applied Physics 2015 · DOI

Abstract

Atmospheric pressure dielectric barrier discharge (DBD) in Ar/H2 gas feed with C2H2 or CH4 admixture was studied at room and high temperature of 680 °C by plasma diagnostics (electrical measurements, fast camera imaging, and optical emission spectroscopy). It was shown that filamentary DBD in pure Ar or Ar/H2 can be converted into homogeneous discharge by an acetylene admixture. Fast intensified charge-coupled device (ICCD) camera proved that this homogeneous discharge is an atmospheric pressure glow discharge (APGD) at room temperature whereas at high temperature the discharge mode switches at every half-period between APGD and atmospheric pressure Townsend discharge. The high temperature discharges (610–710 °C) in Ar/H2/C2H2 and Ar/H2/CH4 were also investigated with respect to a surface bound deposition of carbon nanotubes using 5 nm thick iron layer as a catalyst. CNTs were deposited without any dedicated catalyst pretreatment phase. The quality of CNTs, namely, their density, vertical alignment, and width of the diameter distribution, was better for the C2H2 gas feed and higher temperatures.
BibTeX
@article{elias2015atmospheric,
  author = {Marek Eliáš and Petr Kloc and Ondřej Jašek and Věra Mazánková and David Trunec and Radim Hrdý and Lenka Zajı́čková},
  title = {{Atmospheric pressure barrier discharge at high temperature: Diagnostics and carbon nanotubes deposition}},
  journal = {Journal of Applied Physics},
  year = {2015},
  doi = {10.1063/1.4914062},
}

Loading related content...

Figure