Assessment of Joinability in Additive Manufactured Interlocking Structure with Experiment and Simulation

Se‐Hun Kwon, Hak-Sung Lee, Ye-rim Kim, Eun-Ah Kim, Joon Phil Choi, Taeho Ha, Soonho Won, Jong Bae JeonPreprints.org 2023 · DOI

Abstract

Additive manufactured interlocking structures often face challenges in achieving suitable joinability due to thermal deformation. This issue becomes particularly interesting when fabricating structures that require high density but not fully connected layers, such as soft-magnetic materials. This study focuses on systematical investigation of the deformation as a function of finger thickness and building direction in model interlocking structure. In the perpendicular direction to the build plate, the distortions of joint part were significantly reduced due to lower thermal stress. In addition, the effect of laser power and scan speed on interlocking structure are systematically discussed. Additionally, through stress and thermal simulations of additive manufacturing process, it was confirmed that the compensated model can enhance the joinability of interlocking structures. These findings contribute to the development of optimal design for additive manufactured parts of soft magnetic materials such as stators in electric motor components, which needs insulations and density.
BibTeX
@misc{kwon2023assessment,
  author = {Se‐Hun Kwon and Hak-Sung Lee and Ye-rim Kim and Eun-Ah Kim and Joon Phil Choi and Taeho Ha and Soonho Won and Jong Bae Jeon},
  title = {{Assessment of Joinability in Additive Manufactured Interlocking Structure with Experiment and Simulation}},
  year = {2023},
  doi = {10.20944/preprints202309.2065.v1},
  howpublished = {Preprints.org},
}

Loading related content...

Figure