Assessing skin thermal injury risk in exposure tests of heating until flight

Hongyun Wang, Shannon E. Foley, Hong ZhouarXiv 2024 · DOI · arXiv

Introduction

Millimeter-wave (MMW) systems, operating in the 30–300 GHz range, are increasingly prevalent in telecommunications, security screening, and non-lethal defense technologies such as the Active Denial System (ADS). A primary safety concern for these technologies is the risk of accidental over-exposure leading to thermal injury.

In experimental safety research, the "heating until flight" protocol is often used. In these tests, a subject is exposed to MMW radiation until the thermal sensation becomes sufficiently intense to trigger a withdrawal reflex (the "flight" response). However, quantifying the actual injury risk during these tests is notoriously difficult. Researchers face two primary hurdles: the inability to directly measure the absorbed power density ($P_d$) during a test and the lack of a clear "volume threshold" ($v_c$) for nociceptor activation in the human brain. This paper introduces a mathematical framework to bridge these gaps, using observable data to predict burn severity.

Methodology

Thermal and Damage Modeling

The researchers developed a model based on the 1D heat equation and the Arrhenius equation for thermal damage. Because MMW penetration is extremely shallow (~0.16 mm at 94 GHz) and beam spots are relatively large, lateral heat conduction is negligible, justifying a one-dimensional approach. The Arrhenius equation is used to calculate the damage parameter ($\Omega$), which correlates temperature history with tissue necrosis.

The Normalization Innovation

The core innovation of this paper is a normalization technique that bypasses unmeasurable variables. By scaling the heat and damage equations using length scales derived from the MMW penetration depth, the authors express the thermal damage parameter ($\Omega$) as a function of the "time of flight" ($t_F$). This $t_F$ is the total time from the start of exposure until the subject successfully exits the beam, a metric that is easily measured with standard sensors or stopwatches.

Nociceptor Activation and Reaction Time

The model assumes that flight is initiated when the volume of skin heated above a specific threshold ($40.4^\circ\text{C}$) reaches a critical value. Crucially, the model accounts for the Simple Reaction Time (SRT)—the delay between the brain's decision to move and the body's physical clearance of the beam. The authors set this SRT at 275 ms, identifying it as the most dangerous phase of exposure because the skin remains under the beam while at its peak temperature.

Key Safety Insights

The Reaction Time Floor

The study identifies a physical limit to human safety. Even with high power densities that trigger an immediate pain response, the SRT creates a "floor" for flight time (approximately 0.347s). Below this threshold, avoiding injury becomes physically impossible because the reaction time delay allows for significant energy deposition after the pain threshold has been crossed.

The Baseline Temperature Paradox

Counter-intuitively, the model suggests that a higher initial skin temperature leads to a lower burn risk for a fixed flight time. When the skin is already warm, it reaches the pain threshold faster and with less total absorbed energy, triggering the flight response before significant damage can accumulate.

Spot Size and Safety

Beam geometry plays a critical role in safety. Larger beam radii are significantly safer than narrow beams. A larger spot size activates the required volume of nociceptors more rapidly and at lower peak temperatures, causing the subject to move away before the damage parameter reaches a critical level.

Results and Discussion

The model classifies injuries into three categories based on the damage parameter $\Omega$:

  • First-degree: $0.53 \le \Omega < 1$
  • Second-degree: $1 \le \Omega < 10^4$
  • Third-degree: $\Omega \ge 10^4$

To illustrate the model's predictive power, the authors provide a quantitative example for a flight time of $t_F = 1\text{s}$. With a beam radius equal to the reference scale ($r_s$), the model predicts a second-degree burn ($\Omega = 2.505$). However, by increasing the beam radius by just 25% ($1.25r_s$), the damage parameter drops to $\Omega = 0.026$, effectively eliminating the risk of injury for the same flight duration.

Limitations and Future Work

While the model provides a robust framework for safety assessment, it relies on several simplifications:

  1. Homogeneous Skin: The model treats the skin as a single uniform layer (dermis), ignoring the epidermis and complex multi-layer structures.
  2. Neglected Cooling: To simplify high-power scenarios, the model does not account for blood perfusion or surface cooling (convection/sweat), which may lead to overpredicting damage in long-duration, low-power exposures.
  3. Nociceptor Distribution: The assumption of uniform pain receptor distribution is an idealization; real-world distribution varies across different body sites.

Future research will focus on extending this framework to multi-layer skin models and investigating the sensitivity of the model to non-uniform nociceptor distributions.

Summary updated

BibTeX
@misc{wang2024assessing,
  author = {Hongyun Wang and Shannon E. Foley and Hong Zhou},
  title = {{Assessing skin thermal injury risk in exposure tests of heating until flight}},
  year = {2024},
  eprint = {2408.11947},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2408.11947},
}
Figure