Architecting Highly Anisotropic Thermal Conductivity in Flexible Phase Change Materials for Directed Thermal Management of Cylindrical Li-Ion Batteries

Liying Chen, Tong Yang, Yuxuan Zhang, Jianwen Luo, Yuanyuan Li, Juntao Wang, Wanwan Li, Sujun GuanMaterials 2025 · DOI

TL;DR

This paper introduces a novel hybrid carbon aerogel structure combining 1D carbon nanotubes (CNTs) and 3D expanded graphite (EG) to create highly aligned thermal pathways within flexible phase change materials (PCMs). This engineered material significantly boosts anisotropic thermal conductivity, leading to improved heat dissipation in cylindrical Li-ion batteries and reducing their peak surface temperature by over 13°C.

What Problem Does This Paper Address?

Cylindrical Li-ion batteries, common in many devices, generate heat unevenly due to their "jelly roll" internal structure. This leads to radial heat accumulation and hotspots, which can degrade performance, shorten lifespan, and pose safety risks. Traditional thermal management solutions struggle to precisely direct this heat away. Existing anisotropic PCMs, often relying on single-dimensional conductive fillers, haven't achieved sufficient anisotropy to meet the demands of high-power-density batteries. The challenge is to create a material that can effectively and directionally manage this heat while remaining flexible for integration into complex electronic devices.

Methods

The researchers developed a three-step experimental method to create their advanced PCM:

  1. Hybrid Carbon Aerogel Fabrication: They combined 1D CNTs and 3D expanded graphite (EG) in a specific ratio and used a directional freezing technique. This process, aided by a calcium chloride solution, forces ice crystals to form along a specific axis, guiding the alignment of both EG and CNTs into a highly ordered, anisotropic structure. This creates a robust, aligned thermal conductive skeleton.
  2. PCM Infiltration: Molten paraffin (the phase-change material) was vacuum-infiltrated into the prepared hybrid carbon aerogel skeleton.
  3. Flexible Encapsulation: The PCM-infiltrated aerogel was then encapsulated by molten olefin block copolymer (OBC), which acts as a flexible carrier, providing structural integrity and shape stability without compromising the directional thermal pathways.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Synergy of 1D and 3D: The combination of 1D CNTs and 3D EG is crucial. The rigid 3D EG provides a structural backbone, while the high-aspect-ratio 1D CNTs act as "bridges" and directional guides, enhancing interlayer connectivity and creating more ordered thermal pathways than either material alone.
  • Directional Freezing is Key: The directional freezing method is essential for achieving the highly aligned microstructure, which is the foundation of the material's anisotropic thermal properties.
  • Anisotropy Matters: The paper strongly emphasizes that simply adding conductive fillers isn't enough; their orientation and connectivity are paramount for achieving high thermal conductivity anisotropy, which is precisely what cylindrical batteries need.
  • Flexibility Preserved: A significant finding is that enhancing thermal anisotropy doesn't come at the cost of flexibility. The OBC matrix ensures the material can be bent and twisted, making it suitable for real-world applications in compact and complex devices.

Key Results

  • Enhanced Anisotropy: The hybrid 1D/3D-based PCM showed a 16.7% increase in axial thermal conductivity and a 5.0% increase in radial thermal conductivity compared to a PCM using only a 3D EG skeleton.
  • Battery Performance: When applied to a simulated cylindrical Li-ion battery, the hybrid FPCM reduced the maximum battery-surface temperature by 13.1 °C and the average surface temperature by 13.6 °C during the critical phase-change thermal management stage.
  • Effective Thermal Management Stage: The hybrid FPCM provided an effective thermal management stage that was shorter (292s vs. 428s) but more efficient due to its higher axial thermal conductivity, allowing faster heat spreading.
  • Material Properties: The developed FPCM maintained excellent flexibility, thermal stability (negligible leakage below 90°C), and energy storage capacity (around 57% of pure paraffin's latent heat).

Limitations and Future Work

  • Leakage Above 90°C: The paper notes that leakage becomes more pronounced above 90°C as the OBC matrix softens. While still superior to some benchmarks, this limits its use in extremely high-temperature environments without further modification.
  • Commercialization Focus: The authors suggest future work will involve applying this material to commercial 18650 cylindrical battery systems and evaluating critical safety aspects to facilitate real-world application. This implies that while lab results are promising, scaling up and rigorous safety testing are the next steps.

Summary updated

Abstract

The anisotropic jelly roll structure of cylindrical Li-ion batteries leads to highly directional heat generation, causing severe radial heat accumulation and creating a critical demand for precise thermal management. Conventional anisotropic phase change materials (PCMs), often reliant on single-dimensional conductive skeletons, exhibit limited enhancement in thermal conductivity anisotropy. This study proposes a novel strategy utilizing a hybrid carbon aerogel composed of one-dimensional carbon nanotubes (CNTs) and three-dimensional expanded graphite (EG) to construct highly aligned thermal conduction pathways within a flexible PCM. A three-step experimental method was employed to successfully fabricate a composite PCM with highly anisotropic thermal conductivity. A case study confirmed that, compared to a sole 3D skeleton, the hybrid 1D/3D aerogel significantly improves the alignment of the microstructure. At an optimal hybrid aerogel content of 8 wt.%, the composite achieved a 5.0% increase in radial thermal conductivity and a remarkable 16.7% increase in axial thermal conductivity, indicating a significantly optimized anisotropy ratio. When applied to a cylindrical battery thermal-management case, this material enables directed heat dissipation, effectively lowering the maximum battery-surface temperature by 13.1 °C. This work provides a scalable approach for designing high-performance anisotropic flexible PCMs tailored for advanced thermal management in high-power-density Li-ion batteries and other compact electronics.
BibTeX
@inproceedings{chen2025architecting,
  author = {Liying Chen and Tong Yang and Yuxuan Zhang and Jianwen Luo and Yuanyuan Li and Juntao Wang and Wanwan Li and Sujun Guan},
  title = {{Architecting Highly Anisotropic Thermal Conductivity in Flexible Phase Change Materials for Directed Thermal Management of Cylindrical Li-Ion Batteries}},
  booktitle = {Materials},
  year = {2025},
  doi = {10.3390/ma18235400},
}
Figure