Approximate Constant-Coefficient Multiplication Using Hybrid Binary-Unary Computing for FPGAs

S. Rasoul Faraji, Pierre Abillama, Kia BazarganACM Trans. Reconfigurable Technol. Syst 2022 · DOI · OpenReview

Abstract

Multipliers are used in virtually all Digital Signal Processing (DSP) applications such as image and video processing. Multiplier efficiency has a direct impact on the overall performance of such applications, especially when real-time processing is needed, as in 4K video processing, or where hardware resources are limited, as in mobile and IoT devices. We propose a novel, low-cost, low energy, and high-speed approximate constant coefficient multiplier (CCM) using a hybrid binary-unary encoding method. The proposed method implements a CCM using simple routing networks with no logic gates in the unary domain, which results in more efficient multipliers compared to Xilinx LogiCORE IP CCMs and table-based KCM CCMs (Flopoco) on average. We evaluate the proposed multipliers on 2-D discrete cosine transform algorithm as a common DSP module. Post-routing FPGA results show that the proposed multipliers can improve the {area, area × delay, power consumption, and energy-delay product} of a 2-D discrete cosine transform on average by {30%, 33%, 30%, 31%}. Moreover, the throughput of the proposed 2-D discrete cosine transform is on average 5% more than that of the binary architecture implemented using table-based KCM CCMs. We will show that our method has fewer routability issues compared to binary implementations when implementing a DCT core.
BibTeX
@article{faraji2022approximate,
  author = {S. Rasoul Faraji and Pierre Abillama and Kia Bazargan},
  title = {{Approximate Constant-Coefficient Multiplication Using Hybrid Binary-Unary Computing for FPGAs}},
  journal = {ACM Trans. Reconfigurable Technol. Syst.},
  year = {2022},
  doi = {10.1145/3494570},
}

Loading related content...

Figure