Abstract
The use of stainless steel reinforcements (SSRs) is an effective measure to guarantee the durability of concrete structures in the marine environment. SSRs have been used overseas for many years, whereas the under-construction Hong Kong-Zhuhai-Macao Bridge (HZMB) is the first project using SSRs in the mainland of China. 2304 SSRs have been used as an external anti-corrosion measure for the bridge concrete, and are used only in the severe corrosive area and replace only the outermost layer of carbon steel reinforcements (CSRs) in consideration of cost.
Introduction
The Hong Kong-Zhuhai-Macao Bridge (HZMB) is a monumental engineering feat designed for a service life of 120 years. Located in a harsh marine environment, the bridge faces significant durability challenges, primarily from chloride-induced corrosion. To meet these longevity requirements, engineers turned to stainless steel reinforcements (SSRs), marking the first major application of this technology in mainland China.
The Challenge of Marine Corrosion
Reinforced concrete structures in marine settings are constantly under attack by chloride ions. These ions penetrate the concrete cover and reach the surface of standard carbon steel reinforcements (CSRs). Once the chloride concentration exceeds a certain threshold, it destroys the "passive film"—a thin, protective oxide layer—leading to rapid corrosion. The resulting rust occupies a larger volume than the original steel, creating internal pressure that causes the concrete to crack and spall, eventually compromising the structural integrity.
While stainless steel is inherently resistant to this process, its high cost—typically 6 to 10 times that of carbon steel—has historically limited its use. The HZMB project required a balanced approach that maximized durability while maintaining economic feasibility.
Strategic Material Selection and Application
The engineering team adopted a strategic approach to material selection and placement. Rather than using expensive high-alloy steels like 2205 duplex steel throughout, they selected Grade 2304 (1.4362) lean duplex stainless steel. This grade provides excellent corrosion resistance at a more manageable cost.
A critical metric in this selection was the Pitting Resistance Equivalent Number (PREN). The PREN helps engineers quantify the resistance of various alloys to localized pitting corrosion.
As shown in the table above, Grade 2304 offers a PREN of 24, which is comparable to the widely used 316 austenitic grades but significantly more cost-effective. In the alkaline environment of concrete, this level of resistance is sufficient to provide a chloride threshold approximately 10 times higher than that of standard carbon steel.
Zonal and Layered Deployment
To further optimize costs, SSRs were used selectively:
- Zonal Application: SSRs were deployed only in "splash zones"—the areas most frequently exposed to seawater spray and high chloride concentrations, such as pile caps, pier bodies, and the lower sections of towers.
- Layered Reinforcement: Within these zones, SSRs replaced only the outermost layer of reinforcement and stirrups. The inner layers, protected by a greater depth of concrete, remained standard CSR.
Technical and Economic Considerations
Galvanic Corrosion and Construction Protocols
A common engineering concern is galvanic corrosion occurring when stainless steel is in direct contact with carbon steel. However, research and testing for the HZMB project confirmed that in new, alkaline concrete, both metals remain in a passive state. The galvanic current measured was only 1/10th of the natural corrosion current of carbon steel, rendering the risk negligible.
Strict construction protocols were also implemented. On-site welding of SSRs was prohibited because the heat can degrade the protective passive film, reducing the chloride threshold by nearly half. Instead, all cutting and bending were performed by manufacturers using specialized equipment to ensure material integrity.
Lifecycle Cost Analysis
While the initial investment for SSRs increased construction costs by approximately 10%, the long-term benefits are substantial. By virtually eliminating the need for major durability-related repairs over the 120-year design life, the total lifecycle cost is estimated to be reduced by up to 50%. Unlike epoxy-coated rebar, which can fail if the coating is damaged, SSRs possess a "self-healing" passive film that reforms if the surface is scratched.
Conclusion
The successful implementation of 2304 lean duplex stainless steel in the Hong Kong-Zhuhai-Macao Bridge demonstrates a viable path for high-durability marine infrastructure. By combining strategic material selection based on PREN values with targeted zonal application, engineers achieved a 120-year design life without prohibitive costs. This project serves as a benchmark for future infrastructure developments in aggressive environments, highlighting the shift from minimizing initial costs to optimizing total lifecycle value.
Summary updated