Application of nonlocal beam models for carbon nanotubes

Pin Lü, H.p. Lee, C. Lu, P.q. ZhangInternational Journal of Solids and Structures 2007 · DOI

TL;DR

This paper addresses inconsistencies in applying nonlocal continuum mechanics to model carbon nanotubes (CNTs). The authors provide a consistent framework for nonlocal Euler and Timoshenko beam models, then use them to analyze wave propagation in single- and multi-walled CNTs, revealing how nonlocal effects significantly alter their dynamic properties.

What Problem Does This Paper Address?

As CNTs shrink to nanoscale dimensions, their mechanical properties deviate significantly from bulk materials. Classical continuum mechanics, which assumes scale independence, fails to capture these "size effects." While atomistic simulations can capture these effects, they are computationally expensive for larger structures. Nonlocal continuum mechanics offers a promising alternative by incorporating scale dependence into continuum models. However, previous applications of nonlocal beam models to CNTs have suffered from inconsistencies in deriving governing equations, applying forces, and defining boundary conditions. This paper aims to rectify these issues by presenting a consistent theoretical framework and applying it to study wave propagation in CNTs.

Methods

The core of this paper is the derivation of consistent governing equations for nonlocal Euler and Timoshenko beam models. The authors start with Eringen's nonlocal constitutive relations and adapt them to a one-dimensional beam formulation. They then derive the equations of motion for both Timoshenko and Euler beams, ensuring that all stress components and forces are treated consistently within the nonlocal framework. This involves carefully deriving expressions for bending moments and shear forces that incorporate nonlocal effects. The derived models are then applied to analyze wave propagation in single-walled carbon nanotubes (SWNTs) and double-walled carbon nanotubes (DWNTs) by solving the resulting dispersion relations.

Datasets

Not discussed in the paper. The paper focuses on theoretical modeling and numerical simulations based on established material properties of carbon nanotubes.

Key Insights and Ideas

  • Consistency is Key: The paper strongly emphasizes the need for consistent application of nonlocal stress tensors throughout the derivation of beam models. Inconsistencies, particularly in treating shear forces in Timoshenko beam models, lead to incomplete or incorrect governing equations.
  • Nonlocal Effects Matter at Small Scales: The study demonstrates that nonlocal effects significantly influence the wave propagation characteristics (frequency and phase velocity) of CNTs, especially at higher wavenumbers (shorter wavelengths). Classical beam models overestimate these properties.
  • Two Wave Modes in Timoshenko Beams: The Timoshenko beam model predicts two distinct wave modes for SWNTs: a flexural wave mode and a shear wave mode.
  • Multiple Wave Modes in DWNTs: The interaction between inner and outer tubes in DWNTs leads to four wave modes, a significant increase compared to SWNTs.
  • Nonlocal Parameter Guidance: The paper suggests that the nonlocal parameter ($e_0a$) can be determined by matching dispersion curves from atomic models or experimental data, providing a path for accurate model calibration.

Key Results

  • Consistent Equations: The paper provides explicit, consistent equations of motion for nonlocal Timoshenko and Euler beam models.
  • SWNT Wave Properties: For SWNTs, the nonlocal Timoshenko beam model shows that increasing the nonlocal parameter ($e_0a$) leads to decreased frequencies and phase velocities. This effect becomes more pronounced at higher wavenumbers.
  • DWNT Wave Properties: For DWNTs, the nonlocal effects also reduce phase velocities for all four wave modes, causing them to approach zero as the wavenumber approaches infinity. This contrasts with local models where asymptotic velocities remain finite.
  • Euler vs. Timoshenko: The study highlights that the Euler beam model's predictions for higher wavenumbers deviate significantly from the Timoshenko model, suggesting the latter is more appropriate for capturing the dynamic behavior of CNTs.

Limitations and Future Work

  • Nonlocal Parameter Selection: The paper acknowledges that the choice of the nonlocal parameter ($e_0a$) is crucial for the accuracy of the models. While it suggests matching with atomic models or experiments, determining this parameter for specific applications remains an area for further investigation.
  • Model Simplifications: The models presented are based on beam theory, which is a simplification of the complex 3D structure of CNTs. While effective for capturing certain phenomena, it may not fully represent all aspects of CNT behavior.
  • Experimental Validation: While the paper references experimental data for material constants, direct experimental validation of the predicted wave propagation characteristics under nonlocal conditions would strengthen the findings.
  • Further Applications: The authors suggest that the developed consistent nonlocal beam models can be applied to a wider range of nanoscale structures and phenomena, including vibration analysis, buckling, and fracture mechanics.

Summary updated

BibTeX
@article{lu2007application,
  author = {Pin Lü and H.P. Lee and C. Lu and P.Q. Zhang},
  title = {{Application of nonlocal beam models for carbon nanotubes}},
  journal = {International Journal of Solids and Structures},
  year = {2007},
  doi = {10.1016/j.ijsolstr.2006.12.034},
}

Loading related content...

Figure