Application of flexible electronic technology in real-time monitoring for wheel<bold>-</bold>rail contact forces of high-speed trains

Siyu Chen, Ya‐Feng Liu, Congyi Fu, Hairui Wang, Ying Chen, Bingwei Lu, Yinji Ma, Heling Wang, Feng XueScientia 2023 · DOI

TL;DR

Researchers have developed a novel flexible sensor featuring a ring-shaped strain grid to monitor wheel-rail contact forces in real-time. Unlike traditional discrete strain gauges, this flexible electronic approach provides high precision and sensitivity regardless of the wheel's rotation angle, enabling continuous safety monitoring for high-speed trains.

What Problem Does This Paper Address?

Monitoring the interaction forces between a train's wheels and the rails is critical for preventing derailments and managing track maintenance. Currently, there are two main approaches:

  1. Track-based monitoring: Sensors are placed on the rails. This only captures data when a train passes a specific point, making it impossible to monitor a train continuously across its entire journey.
  2. Wheelset-based monitoring: Traditional strain gauges are attached to the wheels. However, because wheels rotate, the sensitivity of these discrete gauges fluctuates significantly depending on their position relative to the contact point. This creates "blind spots" and makes it difficult to achieve a steady, high-precision signal during high-speed travel.

The authors tackle the challenge of creating a sensor that is "angle-independent"—one that provides a consistent signal no matter how the wheel is oriented.

Methods

The team leveraged flexible electronics technology to design a sensor that conforms to the curved surface of the wheel.

  • Sensor Architecture: The sensor consists of a polyimide (PI) substrate with a ring-shaped strain grid made of thin-film metal (Chromium/Gold). This "ring" structure utilizes the piezoresistive effect: as the wheel deforms under load, the overall resistance of the ring changes.
  • Fabrication: They used micro-fabrication techniques including spin-coating PMMA/PI, electron beam evaporation for metal deposition, and photolithography to pattern the intricate "sawtooth" ring structure.
  • Experimental Setup: To validate the design, they built a 1:7 scale model using ABS resin wheels and a steel track. They performed vertical loading tests using an INSTRON universal testing machine and measured resistance changes with a digital multimeter.
  • Simulation: They complemented physical experiments with Finite Element Analysis (FEA) using ABAQUS to model complex loading scenarios, specifically focusing on how to separate (decouple) vertical forces from lateral forces.

Datasets

The paper does not use standard public datasets. Instead, the authors generated two primary types of data:

  • Experimental Data: Derived from the 1:7 scale model test rig, measuring resistance change ($\Delta R/R_0$) against vertical loads (2–12 kN).
  • Simulation Data: FEA results from a model containing 292,608 elements, used to map radial strain at various points (N1-A through N8-B) under different loading conditions.

Key Insights and Ideas

  • Geometric Averaging: The "aha" moment is the ring-shaped design. By distributing the strain grid in a continuous circle, the sensor captures the integral deformation of the wheel's annular region. This effectively "averages out" the rotational position, solving the sensitivity fluctuation problem inherent in discrete gauges.
  • Symmetric Decoupling: The authors found that by placing sensors on both the inner and outer faces of the wheel, they could mathematically decouple forces.
  • Vertical Force is proportional to the sum of the signals from both sides.
  • Lateral Force is proportional to the difference between the signals.
  • Advantages of "Soft" Sensors: Beyond signal quality, the flexible nature of the sensor means it has negligible mass (preserving the wheel's dynamic balance) and is much easier to package and protect in the harsh, high-vibration environment of a high-speed bogie.

Key Results

  • Linearity & Repeatability: The sensor showed excellent linearity under vertical loads. In cyclic loading tests (2–12 kN), the resistance-time curves were highly stable and repeatable.
  • Angle Independence: Experimental results confirmed that the output signal for the "global" ring sensor remained nearly constant regardless of whether the wheel was at 0°, 90°, or 180°. In contrast, the "local" pin-area signals fluctuated wildly.
  • Effective Decoupling: Simulation data showed that while vertical loads produce similar strain patterns on both sides of the wheel, lateral loads produce opposite bending effects. This confirms that the $(A+B)$ and $(A-B)$ logic can successfully extract both force components in real-time.

Limitations and Future Work

While the proof-of-concept is robust, the authors note several areas for further development:

  • Wireless Integration: Real-world deployment requires robust wireless transmission. Future work will focus on integrating low-noise wireless telemetry to send data from the rotating wheel to the train's onboard diagnostic system.
  • Environmental Durability: The sensors need to be tested against extreme weather, debris, and long-term mechanical wear.
  • Calibration: The mapping between resistance change and actual force needs to be calibrated for full-scale steel wheels, which have different material properties than the ABS models used in this study.
  • Optimization: Further optimization of electrode materials and fixing methods is suggested to improve the signal-to-noise ratio.

Summary updated

Abstract

<p indent="0mm">Wheel-rail contact force monitoring enables the operational safety of high-speed trains and the quality management improvement of railway infrastructure. However, the available wheel-rail contact force measuring methods have difficulty in achieving precision and sensitivity for high-rotating wheels and real-time and continuous measurement of wheel-rail contact forces at high speed. In this work, a novel sensor for wheel-rail contact force monitoring is designed based on flexible electronic technology. A ring-shaped strain gage structure is designed on a flexible substrate, and the deformations of the annular region due to wheel-rail contact forces are detected according to the piezoresistive effect in the metal wire. The sensor is verified to have good linearity under vertical loading experiments and exhibits excellent stability and repeatability during cyclic loading. Furthermore, this sensor can guarantee measurement precision and sensitivity when the wheel is spinning. Additionally, the wheel-rail contact forces along the vertical and lateral directions are proved to be effectively decoupled by the output signals of the sensors conformal to relative positions on both sides of the wheel. Thus, combined with wireless sensing technology, the sensor developed here enables the real-time and continuous measurement of wheel-rail contact forces at high speed, which is of great importance for developing the next generation of high-speed railway intelligent transportation systems.
BibTeX
@inproceedings{chen2023application,
  author = {Siyu Chen and Ya‐Feng Liu and Congyi Fu and Hairui Wang and Ying Chen and Bingwei Lu and Yinji Ma and Heling Wang and Feng Xue},
  title = {{Application of flexible electronic technology in real-time monitoring for wheel\&amp;lt;bold\&amp;gt;-\&amp;lt;/bold\&amp;gt;rail contact forces of high-speed trains}},
  booktitle = {Scientia},
  year = {2023},
  doi = {10.1360/sst-2022-0434},
}
Figure