Application of Electrical Automation Technology in Power System

Kai Wang, Wanqing LiJournal of Power and Energy Engineering 2019 · DOI

Abstract

With the continuous development and progress of science and technology in China, automation technology has occupied an important position in many fields while its application in power system is increasingly widespread. Therefore, the application of electrical automation technology in power system is of great significance for power supply stability and work efficiency. In this paper, the author analyzes the application of electric automation technology in power system and makes contributions to the sustainable and stable development of power enterprises.

Introduction

As social and economic development accelerates, traditional power supply modes are struggling to keep pace with the massive increase in electricity demand. Manual management of complex grids is not only inefficient but also carries a high risk of human error, which can lead to instability or system failures.

To address these challenges, the power industry is undergoing a technological "innovation of the power system." The core objective is to improve work efficiency and power supply stability while reducing the consumption of manpower and material resources. Electrical automation serves as the critical bridge between traditional electrical engineering and modern digital management.

Technological Pillars of Power System Automation

The transition to a modern grid relies on several key technological pillars that transform manual operations into an integrated, intelligent, and highly controllable digital infrastructure.

Real-time Simulation Systems

Real-time simulation systems are used to conduct synchronous experiments for both steady and transient states. This allows researchers to test new devices and control strategies in a "closed-loop" laboratory environment before deployment. This isn't just for design—it’s a critical safety layer, providing the high-quality conditions necessary to test intelligent protection control strategies without risking actual grid hardware.

Intelligent Protection and AI

The integration of expert systems, fuzzy logic, and evolutionary theory has revolutionized fault diagnosis and operation analysis. By applying AI, power systems can predict potential failures and respond to anomalies with greater precision than human operators.

Distribution Network Automation

Modern distribution networks utilize public information models and recursive virtual-flow algorithms to optimize power flow calculations and load forecasting. This ensures that electricity is distributed efficiently across the grid, minimizing waste and balancing loads in real-time.

Programmable Logic Controller (PLC) Technology

PLCs are fundamental to modern automation. They are used for data processing (sorting, computing, and bit manipulation), closed-loop PID control (for variables like flow rate and temperature), and discrete on-off control for auxiliary processes. While often associated with simple factory floors, PLCs in power systems manage complex tasks like D/A (Digital-to-Analog) conversion and thousands of I/O points for "automatic control without limits."

Block diagram of a typical PLC/Microprocessor control system architecture.

The architecture shown above illustrates how a central microprocessor coordinates between memory units, communication interfaces, and various I/O units to maintain system stability and process real-site signals.

Key Insights and Industry Impact

One of the most significant shifts is the move toward "hierarchical integrated automation." By simplifying the links between electrical control, measurement, and protection, enterprises can significantly reduce the workload of manual production and the associated error rates.

Furthermore, Digital Signal Processing (DSP) has specifically solved long-standing issues with "carrier decline" and routing in low-voltage networks, greatly improving the sensitivity of signal transmission. These advancements lead to several qualitative benefits:

  • Reduced Human Error: Automation effectively mitigates the probability of human error in complex switching and monitoring tasks.
  • Improved Controllability: The formation of information control management systems allows for a more stable and responsive grid.
  • Modernization of Substations: The transition from traditional signal cables to optical fibers and computer-integrated secondary equipment has realized the digitalization and networking of substations.
  • Resource Optimization: The introduction of these technologies has led to a measurable reduction in the consumption of manpower and material resources for power enterprises.

Conclusion and Future Directions

While current automation technologies have significantly improved grid stability, the field is primarily descriptive and would benefit from more quantitative case studies. As the electricity market continues to expand, the requirements for "high controllability" will only increase. The next frontier involves deeper integration of advanced information technology to handle system faults more effectively and to support the sustainable development of power enterprises in an increasingly energy-hungry world.

Summary updated

Abstract

With the continuous development and progress of science and technology in China, automation technology has occupied an important position in many fields while its application in power system is increasingly widespread. Therefore, the application of electrical automation technology in power system is of great significance for power supply stability and work efficiency. In this paper, the author analyzes the application of electric automation technology in power system and makes contributions to the sustainable and stable development of power enterprises.
BibTeX
@article{wang2019application,
  author = {Kai Wang and Wanqing Li},
  title = {{Application of Electrical Automation Technology in Power System}},
  journal = {Journal of Power and Energy Engineering},
  year = {2019},
  doi = {10.4236/jpee.2019.75002},
}
Figure