Application of DSP motion controller in welding robot of oil tank

Jia Jia, Pengfei Zhu2015 · DOI

Abstract

This research addresses the design of a specialized welding robot for various oil tank configurations. By implementing a "PC + motion controller" architecture centered on the TMS320F28335 Digital Signal Processor (DSP), the system achieves high-precision multi-axis linkage control. This approach enables the automated welding of end covers for cylindrical, square, and spherical tanks, leveraging the DSP's real-time processing capabilities, high accuracy, and operational stability.

Introduction

As global oil demand increases, storage tanks are growing in size and geometric complexity. A critical challenge in their manufacture is welding the junction between the main body and the end cover. Manual welding is labor-intensive and often inconsistent due to the intricate trajectories required. Traditional automation frequently lacks the flexibility to adapt to different tank shapes. This paper presents a motion control system designed to bridge this gap, providing a stable and adaptable solution for automated welding across diverse geometries.

System Architecture: The Master-Slave Approach

The researchers developed a hierarchical control architecture to manage the complexities of multi-axis motion.

  • Master (PC): Operates in a multitasking real-time environment, handling high-level tasks such as the user interface, sensor signal processing, and state recognition. It transmits high-level commands to the motion controller.
  • Slave (DSP): Centered on the TMS320F28335, this unit executes motor control algorithms (speed, position, and torque) and processes encoder feedback.
Hardware architecture of the TMS320F28335-based motion controller.

The choice of the F28335 DSP is pivotal. Its integrated floating-point unit allows for complex calculations, such as Fast Fourier Transforms (FFTs) and trigonometric functions, to be performed significantly faster than previous fixed-point processors. This speed is essential for the real-time coordinate transformations required for synchronized multi-axis movement.

Mechanical Design and Manipulator Configuration

The robot utilizes a 4-axis manipulator designed to provide the necessary degrees of freedom for complex welding paths.

  1. Vertical Axis: Controls height adjustment.
  2. Horizontal Axis: Manages lateral movement.
  3. Front and Rear Axis: Aligns the work platform with the tank body.
  4. Rotation Axis: Adjusts the attitude and tilt of the welding torch.
3D model of the 4-axis welding robot showing the various movement axes.

Through 3D modeling in UG (Unigraphics) software, the researchers determined that a torch tilt angle of 15° to 25° is optimal for weld formation in these specific tank geometries.

Control Algorithms

To ensure smooth and accurate motion, the system employs specific algorithmic strategies:

  • Incremental PID Control: Unlike absolute PID, the incremental version avoids the accumulation of historical errors, enhancing system stability and reducing sensitivity to operational interference.
  • Exponential Acceleration/Deceleration: For stepper motor control, the authors implemented an exponential ramping method. While simpler than S-curve profiles, exponential curves better align with the physical torque characteristics of stepper motors, resulting in smoother transitions and reduced mechanical noise in industrial settings.

Key Results and Specifications

The integrated system successfully demonstrates a functional welding robot capable of adapting to cylindrical, square, and spherical tank covers. Key technical specifications include:

  • Welding Parameters: Current range of 180–420A, voltage of 24–28V, and speeds of 450–700 mm/min.
  • Performance: The DSP-based controller ensures the real-time responsiveness necessary to maintain a consistent weld bead along irregular or curved paths.

Limitations and Future Outlook

While the current design provides a robust framework, future work could enhance the system's capabilities. Integrating vision-based seam tracking would allow the robot to compensate for physical irregularities in materials that pre-programmed trajectories cannot account for. Additionally, while the system was developed using the CCS3.3 environment, migrating to modern development tools could offer further optimization for the DSP logic.

Summary updated

Abstract

In view of design purpose on the welding robot of different tanks, The purpose of this research is to welding robot motion controller is applied to the tank cover, the system adopts solution of "PC + motion controller". The paper analyses the selection of F28335 motion controller, Through the way of multi-axis linkage control, the movement of the manipulator can complete welding of end cover for different type of oil tanks, so as to make full use of features of real-time, high accuracy and good stability on the motion controller.
BibTeX
@misc{jia2015application,
  author = {Jia Jia and Pengfei Zhu},
  title = {{Application of DSP motion controller in welding robot of oil tank}},
  year = {2015},
  doi = {10.2991/icadme-15.2015.289},
}
Figure