APPLICATION OF DEEP NEURAL NETWORK ON AUTONOMOUS UNDERWATER VEHICLES (AUV) IN SUBSEA PIPELINE INSPECTION

Kai Yi, Chee-Loon Siow, Jaswar Koto, Istas Fahrurrazi NusyirwanJournal of Transport System Engineering 2023 · DOI

Abstract

This study investigates the application of deep neural networks for Autonomous Underwater Vehicles (AUVs) in subsea pipeline inspection. As computer vision technology becomes increasingly sophisticated, its implementation in marine engineering offers an attractive solution for defect detection, reducing human intervention and increasing reliability. This research focuses on the Faster R-CNN algorithm, detailing the creation and validation of a custom dataset. Results indicate the model can detect leaks as small as 1mm, though performance is sensitive to environmental factors such as lighting and camera distance. While the proof-of-concept is successful, dataset size remains a primary bottleneck for real-world deployment.

Introduction: The Subsea Challenge

Subsea pipelines serve as the critical infrastructure of the global energy industry. However, these "arteries" are highly susceptible to corrosion and ruptures. Historical data underscores the severity of this issue; between 1970 and 2000, pipeline failures contributed significantly to massive offshore oil spills, necessitating more robust monitoring solutions.

Historical data of oil spill volumes (1970-2000) highlighting the environmental impact of offshore and onshore pipeline failures.

Current inspection methods rely heavily on Non-Destructive Testing (NDT) and the manual review of CCTV footage. These processes are not only labor-intensive and expensive but also prone to human error. By equipping AUVs with deep learning capabilities, the industry can move toward autonomous, real-time defect identification.

Methodology and Dataset Development

The researchers employed the Faster R-CNN (Region-based Convolutional Neural Network) architecture, utilizing the Detectron2 library. To simulate subsea conditions, a controlled environment was established using a 40cm x 40cm x 70cm water tank containing PVC pipes of various diameters.

Because subsea-specific defect data is scarce, a custom dataset of 289 images was developed. Images were pre-processed to remove metadata and manually labeled using the COCO-annotator tool. The annotation process involved defining two distinct classes: "Pipe" and "Defect."

The COCO Annotator interface used to manually label the custom dataset, distinguishing between "Pipe" (blue) and "Defect" (purple) classes.

Key Insights and Experimental Results

The model demonstrated high precision, achieving a peak class accuracy of 0.96. Notably, the system successfully identified leaks as small as 1mm. However, the experimentation revealed several critical variables that affect performance:

  • The Morphological Trap: Interestingly, 2mm leaks were often easier for the model to detect than 3mm leaks. This occurred because the model learned to associate "crack-like" patterns with defects; the 3mm leaks appeared more "punctuated," suggesting that the visual shape of a defect is more critical for neural network recognition than its absolute size.
  • Distance and Lighting Constraints: Accuracy was highly dependent on proximity and illumination. Detection accuracy remained high (~0.8) at a 20cm distance but plummeted to 0.2 at 60cm. Similarly, performance was significantly optimized in environments with illumination exceeding 100 Lux, highlighting the necessity for high-quality onboard AUV lighting.

Conclusion and Future Directions

The study proves that deep learning can effectively automate high-resolution subsea defect detection. The primary limitation identified was the small dataset size (289 images), which poses a risk of overfitting.

Future research should focus on increasing dataset diversity by incorporating "noisy" data, such as water turbidity and marine growth (biofouling). Additionally, comparing Faster R-CNN with other architectures like YOLO or Mask R-CNN could help identify the optimal balance between processing speed and accuracy for real-time AUV deployment in the open ocean.

Summary updated

Abstract

The purpose of this study is to investigate the application of deep neural network for the Automated Underwater Vehicle in the subsea pipeline inspection. In today’s modern world, we see more and more sophisticated and precise computer vision object detection technology being implemented in our daily lives. To name a few, security cameras, self-driving cars, drones and more. This research suggests that computer vision pipeline defect detection is an attractive solution for the future subsea pipeline defect detection as it relies less human intervention and is more reliable. In this paper, review of the current methods of subsea pipeline inspection was done. Some of the methods with visual detection and their limitations are also discussed. Apart from that, the machine learning algorithm of our focus, Faster RCNN is studied. Beyond that, we have explained the methods of our experimentation and the process of training as well as validating the custom dataset. The outcomes are separated into different sections, training curve, visual data representation as well as the model accuracy in different operating environment. In conclusion, we found that the model is able to detect the underwater pipeline with up to 1mm leak size. However, the low accuracy due to the insufficient dataset is recognized as a bottleneck and some of the recommendations are suggested for future improvement.
BibTeX
@article{yi2023application,
  author = {Kai Yi and Chee-Loon Siow and Jaswar Koto and Istas Fahrurrazi Nusyirwan},
  title = {{APPLICATION OF DEEP NEURAL NETWORK ON AUTONOMOUS UNDERWATER VEHICLES (AUV) IN SUBSEA PIPELINE INSPECTION}},
  journal = {Journal of Transport System Engineering},
  year = {2023},
  doi = {10.11113/jtse.v10.195},
}
Figure