Application of additive manufacturing in customized titanium mandibular implants for patients with oral tumors

Yan Xia, Zhi Chao Feng, Changchun Li, Heming Wu, Chunbo Tang, Lihua Wang, Hongwei LiOncology 2020 · DOI

Abstract

The application of additive manufacturing (AM) technology has been widely used in various medical fields, including craniomaxillofacial surgery. The aim of the present study was to examine the surgical efficiency and post-operative outcomes of patient-specific titanium mandibular reconstruction using AM. Major steps in directly designing and manufacturing 3D customized titanium implants are discussed. Furthermore, pre-operative preparations, surgical procedures and post-operative treatment outcomes were compared among patients who received mandibular reconstruction using a customized 3D titanium implant, titanium reconstruction plates or vascularized autologous fibular grafting. Use of a customized titanium implant significantly improved surgical efficiency and precision. When compared with mandibular reconstruction using the two conventional approaches, patients who received the customized implant were significantly more satisfied with their facial appearance, and exhibited minimal post-operative complications in the 12-month follow-up period. Patients who underwent mandibular reconstruction using a customized titanium implant displayed improved mandibular contour symmetry, restored occlusal function, normal range of mouth opening and no temporomandibular joint related pain; all complications frequently experienced by patients who undergo conventional approaches of mandibular reconstruction.

Introduction

Mandibular reconstruction following tumor resection is a complex surgical challenge. The mandible is essential for mastication, speech, and maintaining facial identity. Historically, surgeons have relied on two primary methods: titanium reconstruction plates and vascularized fibular grafting. However, reconstruction plates often require manual intraoperative bending, which lacks precision and can lead to mechanical failure or infection. Fibular grafting, while biologically effective, involves significant donor-site morbidity and often fails to perfectly replicate the complex three-dimensional contour of the jaw.

This study evaluates how additive manufacturing (AM), specifically Electron-Beam Melting (EBM), can bridge the gap between digital surgical planning and physical reality, providing a more precise and patient-friendly alternative.

Materials and Methods

The researchers employed a comprehensive CAD/CAM workflow. High-resolution 3D data was acquired via Cone-Beam Computed Tomography (CBCT) to model the patient's unique anatomy and the extent of the defect.

3D CT reconstruction of a mandibular defect resulting from tumor resection.

Software was used to design customized implants and surgical guides. The implants were fabricated using EBM with Ti6Al4V ELI titanium alloy powder. A critical feature of these implants is the inclusion of a porous mesh structure, designed to match the Young’s modulus of natural bone to reduce stress shielding and promote biological integration.

A customized porous titanium implant designed via CAD and fabricated via EBM, shown fitted to a 3D-printed model for pre-operative verification.

The study compared three patient cohorts: Group A (n=4) received customized 3D-printed titanium implants; Group B (n=6) used traditional reconstruction plates; and Group C (n=10) underwent vascularized autologous fibular grafting. Outcomes were tracked over a 12-month follow-up period.

Results

The customized 3D-printed approach (Group A) showed clear statistical superiority in clinical outcomes. 75% of Group A patients achieved a Grade I outcome (optimal appearance, normal mouth opening, and no pain), whereas Group B had 0% Grade I outcomes and Group C had only 10%. Statistical analysis confirmed that Group A's results were significantly better than Group B ($P=0.0191$) and Group C ($P=0.0378$). Patients in the 3D-printed group displayed improved symmetry and restored occlusal function without the complications of donor-site pain or plate loosening.

Discussion

A key innovation discussed is the biomechanical matching achieved through porous structures. By tuning the implant's stiffness to match natural bone, the risk of stress shielding is minimized, improving long-term interface stability. Furthermore, the use of 3D-printed surgical guides and pre-fabricated implants removes intraoperative guesswork, significantly reducing operative time and improving surgical precision. While the study acknowledges hurdles such as high infrastructure costs and concerns regarding radiation sensitivity for oncology patients, the aesthetic and functional benefits are substantial.

Conclusion

Customized 3D-printed titanium implants represent a major leap forward in personalized maxillofacial surgery. Despite the small sample size, the results suggest that this technology offers superior precision, better functional recovery, and higher patient satisfaction compared to traditional reconstruction methods.

Summary updated

Abstract

The application of additive manufacturing (AM) technology has been widely used in various medical fields, including craniomaxillofacial surgery. The aim of the present study was to examine the surgical efficiency and post-operative outcomes of patient-specific titanium mandibular reconstruction using AM. Major steps in directly designing and manufacturing 3D customized titanium implants are discussed. Furthermore, pre-operative preparations, surgical procedures and post-operative treatment outcomes were compared among patients who received mandibular reconstruction using a customized 3D titanium implant, titanium reconstruction plates or vascularized autologous fibular grafting. Use of a customized titanium implant significantly improved surgical efficiency and precision. When compared with mandibular reconstruction using the two conventional approaches, patients who received the customized implant were significantly more satisfied with their facial appearance, and exhibited minimal post-operative complications in the 12-month follow-up period. Patients who underwent mandibular reconstruction using a customized titanium implant displayed improved mandibular contour symmetry, restored occlusal function, normal range of mouth opening and no temporomandibular joint related pain; all complications frequently experienced by patients who undergo conventional approaches of mandibular reconstruction.
BibTeX
@inproceedings{xia2020application,
  author = {Yan Xia and Zhi Chao Feng and Changchun Li and Heming Wu and Chunbo Tang and Lihua Wang and Hongwei Li},
  title = {{Application of additive manufacturing in customized titanium mandibular implants for patients with oral tumors}},
  booktitle = {Oncology},
  year = {2020},
  doi = {10.3892/ol.2020.11912},
}
Figure