Anti-Cavitation Design of the Symmetric Leading-Edge Shape of Mixed-Flow Pump Impeller Blades

Di Zhu, Ran Tao, Ruofu XiaoSymmetry 2019 · DOI

TL;DR

This paper tackles the critical issue of cavitation in mixed-flow pumps, a phenomenon that degrades performance and damages components. By employing a novel optimization strategy combining a Diffusion-Angle Integral method for blade geometry parameterization, a Genetic Algorithm for searching optimal designs, and Computational Fluid Dynamics for performance prediction, the researchers successfully improved the cavitation inception performance of pump impellers. This approach offers a valuable reference for designing bladed pumps with enhanced cavitation resistance.

What Problem Does This Paper Address?

Mixed-flow pumps are essential for fluid transfer, offering a balance of high flow rates and heads. However, when installed deep underwater, they are susceptible to significant cavitation due to pressure drops. Cavitation, the formation and collapse of vapor bubbles, leads to noise, vibration, and material damage, severely impacting pump performance and reliability. While previous research has focused on mitigating large-scale cavitation, this paper specifically targets the inception of cavitation, which occurs at the impeller blade's leading edge – the lowest pressure point. The challenge lies in optimizing this leading-edge geometry to delay cavitation onset without negatively affecting the pump's overall head and efficiency.

Methods

The core of this research is a sophisticated optimization framework designed to refine the leading-edge shape of mixed-flow pump impellers for improved cavitation performance.

  • Diffusion-Angle Integral (DI) Method: This novel approach parameterizes the leading-edge geometry by deconstructing it into five parts, including a leading-edge ellipse arc and a thickness diffusion region. Crucially, it simplifies the complex geometry control into just three key design parameters (Rab, Ys, and B), significantly reducing the complexity of optimization compared to traditional multi-point B-spline methods.
  • Genetic Algorithm (GA): A nature-inspired optimization algorithm, the GA was employed to search for the optimal impeller geometry. It mimics biological evolution by creating a population of "individuals" (impeller designs), evaluating their "fitness" (cavitation performance), and iteratively improving the population through selection, crossover, and mutation.
  • Computational Fluid Dynamics (CFD): The SST-DES turbulence model was used within ANSYS CFX to predict the cavitation performance (specifically, the minimum pressure coefficient, -Cpmin) and head-efficiency performance of each generated impeller design. This allowed for a robust evaluation of the GA's proposed solutions.

The optimization process focused on a weighted fitness function that considered the -Cpmin at three different flow rate conditions (0.7, 1.0, and 1.2 Qd), with higher weights assigned to off-design conditions to improve robustness.

Datasets

Not discussed in the paper. The study utilizes CFD simulations and experimental data from a specific mixed-flow pump test rig for verification.

Key Insights and Ideas

  • Simplified Parameterization is Key: The DI method's ability to reduce complex leading-edge geometry to just three parameters is a significant contribution, making optimization tractable and efficient.
  • Targeting Inception Matters: Focusing on cavitation inception at the leading edge, rather than just mitigating established cavitation, is crucial for proactive design.
  • Off-Design Performance is Critical: The optimization strategy's emphasis on off-design flow rates (0.7 and 1.2 Qd) highlights the importance of robust performance across a range of operating conditions.
  • Minimal Impact on Primary Performance: The optimization successfully improved cavitation performance with only minor changes to head and efficiency, demonstrating that anti-cavitation design doesn't necessarily compromise core pump functions.

Key Results

  • The optimization process converged within 60 iterations, with the fitness function (ffit) improving from -1.9945 to -0.9615.
  • The minimum pressure coefficient (Cpmin) values were significantly increased (made less negative) across the 0.5–1.2 Qd flow rate range, indicating delayed cavitation inception.
  • Cavitation performance was notably improved in the 0.62–0.78 Qd and 1.08–1.20 Qd ranges.
  • The changes in head and hydraulic efficiency were minimal, less than 0.7% and 0.6% respectively, validating the effectiveness of the DI method in preserving primary performance metrics.

Limitations and Future Work

  • Single Passage Simplification: While CFD simulations used single passages for efficiency, the paper notes that differences can exist compared to full-passage simulations. The final verification was performed on a full-passage model.
  • Experimental Verification Scope: While head and efficiency were experimentally verified, direct experimental validation of the improved cavitation inception performance was not detailed.
  • Future Work: The authors suggest that this combination strategy can be applied to similar optimization design cases for other pump designs, implying potential for broader application. Further experimental validation of the cavitation improvement would strengthen the findings.

Summary updated

BibTeX
@article{zhu2019anti,
  author = {Di Zhu and Ran Tao and Ruofu Xiao},
  title = {{Anti-Cavitation Design of the Symmetric Leading-Edge Shape of Mixed-Flow Pump Impeller Blades}},
  journal = {Symmetry},
  year = {2019},
  doi = {10.3390/sym11010046},
}
Figure