Annealing effect on electron field-emission properties of diamond-like nanocomposite films

X. Ding, Dong-sheng Mao, Beng Kang Tay, Shu Ping Lau, J. Shi, Yewen Li, Zhe Sun, Xiaohong Shi, H.s. Tan, Fu-min Zhang, Xiang-huai LiuJournal of Applied Physics 2000 · DOI

Abstract

The field-emission properties of a Si–O bond-containing diamond-like nanocomposite (DLN) film were investigated as a function of annealing temperature (Ta). It was found that with increasing Ta the emission threshold voltage decreased gradually. After annealing at Ta=500 °C, the emission current decreased significantly. At Ta=700 °C, however, the field-emission properties of the DLN film improved greatly, the threshold field became very low (∼1.5 V/μm), and the emission current rather high (e.g., ∼2.3 μA/mm2 at an electric field of 22 V/μm). The structural variation of the film after annealing at different temperatures was monitored by ultraviolet Raman spectroscopy, spectroscopic ellipsometry, atomic-force microscopy, and electrical resistivity measurements. By using a three-step model: (i) electron injection from the substrate, (ii) electron transport through the film, and (iii) electron emission at the film surface, the annealing effect on field-emission properties of the DLN film were qualitatively interpreted. It is believed that the threshold electric field is determined by the local electron affinity on the film surface, while the emission current is mainly limited by electron injection and transport processes.
BibTeX
@article{ding2000annealing,
  author = {X. Ding and Dong-sheng Mao and Beng Kang Tay and Shu Ping Lau and J. Shi and Yewen Li and Zhe Sun and Xiaohong Shi and H.S. Tan and Fu-min Zhang and Xiang-huai Liu},
  title = {{Annealing effect on electron field-emission properties of diamond-like nanocomposite films}},
  journal = {Journal of Applied Physics},
  year = {2000},
  doi = {10.1063/1.1319166},
}

Loading related content...

Figure