Angle Measurement of Objects outside the Linear Field of View of a Strapdown Semi-Active Laser Seeker

Yongbin Zheng, Huimin Chen, Zongtan Zhou2018 · DOI

TL;DR

This paper presents a novel method for strapdown semi-active laser seekers to accurately measure the angles of objects even when they fall outside the seeker's linear field of view (FOV). By fusing data from the seeker's last valid measurement with GPS and Inertial Navigation System (INS) data, the method overcomes a critical limitation in current laser guidance systems.

What Problem Does This Paper Address?

Semi-active laser seekers are highly precise guidance systems, but they traditionally struggle to track targets once the laser spot moves outside their linear field of view (FOV). This limitation is particularly pronounced in strapdown laser seekers, where the detector is fixed to the missile's body, making it more susceptible to losing track. Existing solutions, like expanding the seeker's optical FOV, often lead to reduced accuracy and detection range. This paper tackles the challenge of maintaining accurate angle measurements for targets that are either in the nonlinear FOV or completely outside the seeker's linear FOV, a significant bottleneck for the broader application of strapdown semi-active laser seekers.

Methods

The core of the proposed method lies in fusing data from multiple sources to reconstruct the object's angles when direct measurement is impossible. The approach involves:

  • Data Fusion: Combining the last known valid angle measurements from the seeker (when the object was within the linear FOV) with concurrent GPS and INS data.
  • Space Consistency Problem Solving: This involves transforming coordinate systems to accurately represent the seeker's and object's positions and orientations over time. The paper defines several coordinate frames: Earth-centered, local navigation, body frame, and line-of-sight frame. It then meticulously details the transformation matrices required to reconcile these frames, accounting for both attitude and positional changes of the seeker.
  • Time Consistency Problem Solving: This is addressed by precisely aligning the GPS and INS data with the corresponding time stamps.
  • Two-Stage Calculation:
    1. First Stage: Focuses on calculating the object's angles in an intermediate body frame by accounting for the seeker's attitude motion from the last valid measurement time ($t_0$) to the current time ($t_1$). This involves a series of rotation transformations using Euler angles or quaternions.
  • Second Stage: Addresses the seeker's translational movement. It calculates the vector from the seeker's position at $t_1$ to the object's position by considering the seeker's trajectory and the object's last known angles. This stage involves calculating Earth's curvature radii and transforming coordinates between different frames to determine the final object angles.

Datasets

Not discussed in the paper. The paper relies on simulated GPS and INS data for evaluation.

Key Insights and Ideas

  • Leveraging Inertial and GPS Data: The paper demonstrates that by intelligently fusing readily available GPS and INS data with the seeker's last known measurement, it's possible to overcome the FOV limitation. This is a significant departure from purely optical solutions.
  • Decomposition of Motion: The method's elegant decomposition of the seeker's movement into attitude changes followed by translational changes simplifies the complex kinematic problem.
  • Robustness to Errors: The proposed method shows resilience to a certain level of GPS and INS errors, which is crucial for real-world applications where perfect sensor data is rare.
  • Bridging the Gap: The method effectively bridges the gap between when a target is within the linear FOV and when it is not, ensuring continuous angle estimation.

Key Results

The paper presents two numerical simulation results:

  • First Simulation (No Errors): When using error-free GPS and INS data, the proposed method achieves extremely high accuracy, with pitch and yaw angle errors close to zero (less than $1 \times 10^{-6}$), attributed to numerical truncation. This validates the core correctness of the algorithm.
  • Second Simulation (With Errors): Under simulated GPS errors (10m) and INS errors (20°/h drift, 0.333° initial attitude error), the method demonstrates good performance. For instance, within the first 3.6 seconds of the object being outside the linear FOV, the pitch angle error remained below 0.14° and the yaw angle error below 0.068°. The paper concludes that the method can ensure angular measurement error is less than 0.2° for up to 6.5 seconds when the object is outside the linear FOV, under these error conditions.

Limitations and Future Work

  • Limitations:
    • The accuracy of the proposed method is directly dependent on the accuracy of the GPS and INS data. Higher sensor errors lead to larger angle measurement errors.
  • The method relies on the "last valid angle measurement" when the object was within the linear FOV. If this last measurement is significantly old or inaccurate, it could impact subsequent estimations.
  • The paper focuses on a specific type of strapdown semi-active laser seeker and may require adaptation for different seeker architectures.
  • Future Work:
    • The authors suggest that improving GPS and INS accuracy will directly enhance the proposed method's performance.
  • Further investigation into real-world flight tests would be beneficial to validate the simulation results.
  • Exploring adaptive filtering techniques to better handle dynamic INS error models could be a valuable extension.

Summary updated

BibTeX
@misc{zheng2018angle,
  author = {Yongbin Zheng and Huimin Chen and Zongtan Zhou},
  title = {{Angle Measurement of Objects outside the Linear Field of View of a Strapdown Semi-Active Laser Seeker}},
  year = {2018},
  doi = {10.3390/s18061673},
}
Figure