Angle and space multiplexed holographic storage using the 90° geometry

Geoffrey W. Burr, Fai Mok, Demetri PsaltisOptics Communications 1995 · DOI

TL;DR

This paper presents a novel holographic data storage system that combines angular and spatial multiplexing using a unique 90° crystal geometry and a segmented mirror array. This approach allows for storing up to 500 holograms at each of 8 spatially distinct locations, significantly increasing storage density without mechanical movement for angle selection.

What Problem Does This Paper Address?

Holographic data storage offers the potential for extremely high storage densities, but achieving this requires efficiently multiplexing multiple holograms within a single crystal. Traditional methods rely on changing the angle, wavelength, or phase code of the reference beam. While these techniques can store many holograms at one location, the overall capacity is limited. To overcome this, spatial multiplexing – storing holograms at different physical locations within the crystal – is necessary. However, implementing both angular and spatial multiplexing efficiently, especially with fast random access, has been a challenge. Existing methods either involve mechanical movement of the storage medium (slow) or complex acousto-optic deflectors (expensive and complex). This paper addresses the need for a system that can achieve high storage capacity through both angular and spatial multiplexing in a more streamlined and potentially faster manner.

Methods

The core innovation lies in the use of a 90° geometry for holographic storage and a segmented mirror array.

  • 90° Geometry: In this setup, the signal beam propagates along the long axis of a LiNbO₃ crystal, while the reference beam enters from a perpendicular face. This simplifies the optical path as both beams enter normal to crystal faces and the signal beam is naturally present at all spatial locations.
  • Segmented Mirror Array: This is the key to non-mechanical angular multiplexing. The array is composed of multiple horizontal strips, each with a specific tilt. A focused spot from a mechanical scanner is directed onto these strips. The vertical position of the spot selects a spatial location, while the horizontal position on a strip determines the angle of the reflected reference beam. This allows for precise control over both spatial and angular multiplexing without moving the crystal or the primary light sources.
  • Mechanical Scanner: A 2D mechanical scanner is used to position the focused spot onto the mirror array, enabling the selection of different spatial locations and reference beam angles.
  • Spatial Multiplexing: Achieved by directing the reference beam to different physical locations within the crystal using the segmented mirror array. The paper demonstrates 8 spatially multiplexed locations.
  • Angular Multiplexing: Achieved by varying the angle of the reference beam using the tilt of the mirror strips. The paper demonstrates storing up to 500 holograms at each location through angular multiplexing.

Datasets

Not discussed in the paper. The "input images" are transparencies used for recording holograms, and the "reconstructions" are the output images retrieved from the stored holograms.

Key Insights and Ideas

  • The 90° geometry simplifies optical alignment and beam delivery: By having the signal beam travel along the crystal's length, it's inherently present at all spatial multiplexing locations, eliminating the need for complex object beam deflection.
  • Segmented mirror array enables non-mechanical angle selection: This is a crucial advancement, moving away from mechanical beam steering for angular multiplexing and paving the way for faster access.
  • Combining angular and spatial multiplexing is key to high capacity: The paper demonstrates that by using both techniques in tandem, storage densities can be dramatically increased.
  • Absorption in the crystal is a significant factor: While the 90° geometry has advantages, the absorption of light within the long crystal bar affects modulation depth. However, the authors show that this effect can be compensated for during readout.
  • Potential for 2D spatial multiplexing: The segmented mirror array is designed for 2D spatial multiplexing, suggesting that stacking multiple bars could lead to even higher storage capacities.

Key Results

  • Successfully stored 500 angle-multiplexed holograms at a single location.
  • Demonstrated 8 spatially multiplexed locations, each storing up to 500 holograms.
  • Achieved an average diffraction efficiency of 10⁻⁸.
  • Showed that position-dependent modulation depth due to crystal absorption does not prevent uniform image reconstruction.
  • The system's capacity limit was primarily dictated by the number of distinct reference angles that could be provided, rather than the crystal's dynamic range, due to the limited aperture of the beamsplitter used.

Limitations and Future Work

  • Mechanical Scanner: While the mirror array allows for non-mechanical angle selection, the current system still uses a mechanical scanner to position the spot on the mirror array. Future work suggests replacing this with a 2D non-mechanical angle scanner (e.g., using acousto-optic cells) for faster random access.
  • Beamsplitter Aperture: The limited aperture of the beamsplitter restricted the number of usable mirror strips and thus the number of spatial locations. Using a larger aperture system could increase the number of spatial locations.
  • Diffraction Efficiency: The current diffraction efficiency (10⁻⁸) limits random access time. Future work could involve improving this efficiency through crystal annealing to achieve faster readout.
  • Absorption Losses: While compensated for in readout, absorption still impacts signal strength and dynamic range.
  • Future Directions: The authors propose extending spatial multiplexing to a 2D grid and stacking multiple crystal bars to achieve capacities in the hundreds of thousands of holograms. They also envision a system with non-mechanical scanning for truly random access, limited only by detector sensitivity.

Summary updated

BibTeX
@inproceedings{burr1995angle,
  author = {Geoffrey W. Burr and Fai Mok and Demetri Psaltis},
  title = {{Angle and space multiplexed holographic storage using the 90° geometry}},
  booktitle = {Optics Communications},
  year = {1995},
  doi = {10.1016/0030-4018(95)00147-z},
}
Figure