Analysis of the Influence of the Stability Factors of PV/T-SAHP on the Performance of the System

Haitao Wang, Jie Yuan, Ren Wang, Wei HeSustainability 2015 · DOI

TL;DR

This paper investigates the stability and performance of photovoltaic/thermal solar-assisted heat pump (PV/T-SAHP) systems, which often operate under suboptimal conditions due to mismatches between components. The authors propose the "Minimum Stable Signal" (MSS) line theory to explain and predict system instability, offering insights into how to optimize performance by carefully controlling the electronic expansion valve (EEV) and compressor speed.

What Problem Does This Paper Address?

Solar-assisted heat pump (SAHP) systems, particularly those integrated with photovoltaic/thermal (PV/T) collectors, aim to improve energy efficiency by combining solar energy harvesting with heat pump technology. However, these systems frequently operate under "undesigned conditions" where the variable nature of solar radiation creates a mismatch between the collector's energy output and the heat pump's capacity. This mismatch can lead to system oscillation and instability, particularly when using fixed-frequency compressors and standard control strategies. The paper specifically addresses the challenge of maintaining stable and efficient operation in PV/T-SAHP systems by understanding and controlling the dynamic interplay between the electronic expansion valve (EEV), the evaporator, and the compressor.

Methods

The study employs a combination of mathematical modeling and experimental testing to analyze the PV/T-SAHP system.

  • Mathematical Modeling: The authors develop detailed mathematical models for key components of the system, including the compressor, the PV/T evaporator, and the EEV. These models incorporate thermodynamic principles and heat transfer equations to simulate system behavior under various conditions.
  • Experimental Setup: A prototype PV/T-SAHP system was constructed and tested. The experiments involved varying parameters such as EEV opening pulse, condensing water temperature, compressor frequency, solar radiation, and ambient temperature.
  • Stability Analysis: A core contribution is the proposal of the "Minimum Stable Signal" (MSS) line theory. This theory aims to define a critical operating region for the evaporator and EEV match, where the system operates stably. The paper uses this theory to explain observed oscillations and to guide control strategies.

Datasets

Not discussed in the paper. The study relies on experimental data collected from the authors' prototype PV/T-SAHP system under various controlled conditions.

Key Insights and Ideas

  • The MSS Line is Crucial: The "Minimum Stable Signal" (MSS) line theory is a key conceptual contribution. It highlights that system stability is intrinsically linked to the evaporator's superheat and the EEV's opening, defining a critical operating window for optimal performance. Operating outside this window leads to instability.
  • Inverter Compressors and EEVs are Key Control Levers: The paper emphasizes that inverter compressors (allowing variable frequency) and EEVs (allowing precise refrigerant flow control) are essential for managing the dynamic nature of SAHP systems and achieving stable operation.
  • Trade-offs Exist: There's a fundamental trade-off between system COP and collector thermal efficiency. Increasing compressor frequency can improve cooling power and PV efficiency but often reduces overall COP. Conversely, lower frequencies can yield higher COP but may lead to incomplete vaporization and compressor issues.
  • Environmental Factors Matter Significantly: Solar radiation and ambient temperature have a profound impact on system performance and stability. Higher solar radiation generally increases evaporator load, requiring careful EEV and compressor adjustments to maintain stability.
  • Low Temperature Operation is Challenging: At lower ambient temperatures, maintaining stable operation becomes more difficult, with a higher tendency for evaporator outlet superheat to fall below the critical MSS line, leading to oscillations.

Key Results

  • High COP at Low Frequencies (with caveats): At low compressor frequencies (e.g., 20 Hz), the system can achieve very high COP values (up to 9.0) under high solar radiation. However, this is often accompanied by unstable operation and low collector thermal efficiency due to insufficient superheat.
  • Optimal EEV Opening: The study suggests that an EEV opening pulse of 200 provides a good balance, yielding higher COP and collector thermal efficiency compared to other tested pulses (100, 300, 400).
  • PV Efficiency Boost at High Frequencies: Higher compressor frequencies (e.g., 70 Hz) lead to significantly improved photovoltaic efficiency (up to 12.74%), attributed to the enhanced cooling effect of the PV modules by the refrigerant.
  • System Oscillation at Extremes: The system exhibits unstable operation and compressor power fluctuations when the EEV opening is too large (e.g., 500) or when ambient temperatures are low, pushing the system outside the MSS line.
  • Compressor Frequency Impact: Increasing compressor frequency from 30 Hz to 50 Hz improved COP by 43.0% compared to a standard heat pump under similar conditions, but further increases to 70 Hz led to strong oscillations.

Limitations and Future Work

  • Simulation vs. Reality: While simulations provide valuable insights, the paper acknowledges that the high COP values observed at very low frequencies (e.g., 9.0) are theoretical and may not be achievable in reality due to factors like incomplete vaporization and system vibration.
  • MSS Line Determination: The paper proposes the MSS line theory but notes that its precise determination requires detailed quantitative analysis of the evaporator and expansion valve dynamics.
  • Future Work: The authors suggest that the appropriate choice of an electronic expansion valve with suction heat control is the best way to achieve stability and maximize economic results. Further research could focus on developing advanced control strategies based on the MSS theory to optimize both stability and energy efficiency across a wider range of operating conditions.

Summary updated

Abstract

The integrated photovoltaic/thermal collector (PV/T) with solar assisted heat pump (SAHP) often operates under an undesigned condition. Against the backdrop of heat pump system oscillation resulting from the mismatching between collectors area and compressor capacity, this work explores the dynamic performance of heat pump system at a fixed compressor frequency when the condensing water temperature and electronic expansion valve (EEV) opening are variable or invariable. We also consider why the system is unstable and propose the theory of SAHP system stability. Also, a preliminary performance analysis is made on SAHP system that is respectively influenced by an inverter compressor and EEV. The MSS(Minimum Stable Signal) line theory is proposed to account for system unstabilty in the research of the match between EEV and evaporators, that is to say, the critical problem of keep the system stability is to find out how evaporators superheat under the circumstance of specified loads and its corresponding EEV opening, in other words, to find the MSS line.
BibTeX
@inproceedings{wang2015analysis,
  author = {Haitao Wang and Jie Yuan and Ren Wang and Wei He},
  title = {{Analysis of the Influence of the Stability Factors of PV/T-SAHP on the Performance of the System}},
  booktitle = {Sustainability},
  year = {2015},
  doi = {10.3390/su8010022},
}
Figure