Analysis of parabens in environmental water samples by covalent organic framework-based magnetic solid-phase extraction-high performance liquid chromatography

Yue Bao, Yixin Zhai, Ning Tao, Pin Chen, Shukui ZhuChinese 2022 · DOI

TL;DR

This paper introduces a novel magnetic solid-phase extraction (MSPE) method using a custom-synthesized magnetic covalent organic framework (Fe₃O₄@TbBd) for the rapid and sensitive detection of parabens in environmental water samples. The developed method offers improved efficiency, shorter analysis times, and environmental friendliness compared to existing techniques, making it a promising tool for monitoring these potentially harmful preservatives.

What Problem Does This Paper Address?

Parabens are widely used antimicrobial preservatives in cosmetics, pharmaceuticals, and food products due to their effectiveness and low cost. However, their widespread presence raises concerns about potential risks to human health, including endocrine disruption. Detecting parabens in complex environmental matrices like water samples is challenging due to interfering substances that can affect analytical sensitivity. Existing sample preparation methods can be time-consuming, require large amounts of organic solvents, or lack sufficient efficiency. Therefore, there's a need for simple, rapid, sensitive, and environmentally friendly methods for paraben analysis in environmental water.

Methods

The core of this research lies in the development of a novel adsorbent material and its application in a magnetic solid-phase extraction (MSPE) technique coupled with high-performance liquid chromatography-ultraviolet detection (HPLC-UV).

  • Adsorbent Synthesis: The researchers synthesized a magnetic covalent organic framework (COF) material, denoted as Fe₃O₄@TbBd. This was achieved by reacting Fe₃O₄ nanoparticles (as the magnetic core) with 1,3,5-triformylbenzene (Tb) and benzidine (Bd) via a Schiff base reaction at room temperature.
  • Characterization: The synthesized Fe₃O₄@TbBd was thoroughly characterized using various techniques:
  • Scanning Electron Microscopy (SEM): To visualize the morphology and surface structure.
  • Thermogravimetric Analysis (TGA): To assess thermal stability.
  • X-ray Diffraction (XRD): To confirm crystallinity and structure.
  • Vibrating Sample Magnetometer (VSM): To evaluate magnetic properties.
  • Magnetic Solid-Phase Extraction (MSPE): This technique utilizes the magnetic properties of Fe₃O₄@TbBd for efficient sample cleanup and analyte preconcentration. The process involves:
  • Adsorption: Adding the Fe₃O₄@TbBd adsorbent to the water sample, allowing parabens to bind to the COF.
  • Separation: Using an external magnet to quickly separate the magnetic adsorbent from the sample.
  • Desorption: Eluting the bound parabens from the adsorbent using a suitable solvent.
  • Analysis: Analyzing the eluted sample using HPLC-UV.
  • Method Optimization: Key parameters influencing MSPE efficiency were systematically investigated and optimized, including adsorbent dosage, extraction time, sample pH, desorption solvent, desorption time, and number of desorption steps.
  • HPLC-UV Analysis: The extracted parabens were quantified using a C18 reversed-phase HPLC column with an acetonitrile/ultrapure water mobile phase and UV detection at 254 nm.

Datasets

Not discussed in the paper. The study focuses on method development and validation using spiked environmental water samples and real environmental water samples.

Key Insights and Ideas

  • Novel Magnetic COF Adsorbent: The successful synthesis of Fe₃O₄@TbBd represents a significant contribution. Combining the magnetic separability of Fe₃O₄ with the high surface area, tunable porosity, and stability of COFs creates an ideal material for MSPE.
  • Efficient Magnetic Separation: The Fe₃O₄@TbBd material exhibits strong magnetic responsiveness, allowing for rapid and complete separation from the sample matrix within 30 seconds, which is crucial for efficient sample processing.
  • Optimized Extraction Conditions: The systematic optimization of MSPE parameters (adsorbent dosage, extraction time, pH, desorption solvent, etc.) led to a highly efficient extraction process, demonstrating the robustness of the developed method.
  • Environmental Friendliness: The method utilizes a relatively small amount of adsorbent and organic solvent for desorption, aligning with the growing demand for greener analytical techniques.

Key Results

  • Material Characterization: SEM images showed good dispersion of Fe₃O₄ nanoparticles and successful coating with the TbBd COF. FT-IR and XRD confirmed the successful synthesis of the Fe₃O₄@TbBd material. TGA indicated good thermal stability up to 350°C. VSM showed a decrease in magnetization after COF coating, but still sufficient for magnetic separation.
  • Method Performance:
    • Linearity: Excellent linear relationships were observed for the four parabens (ethylparaben, propylparaben, butylparaben, and benzylparaben) with correlation coefficients (r) > 0.99.
  • Sensitivity: The limits of detection (LODs) ranged from 0.2 to 0.4 µg/L, and the limits of quantification (LOQs) ranged from 0.7 to 1.4 µg/L.
  • Precision: Intra-day relative standard deviations (RSDs) were less than 5.5%, and inter-day RSDs were less than 4.9%, indicating good reproducibility.
  • Accuracy: Spiked recoveries were in the range of 86.1% to 110.8% under optimal conditions.
  • Real Sample Analysis: The method was successfully applied to real environmental water samples (East Lake water, Yangtze water, and domestic wastewater). Ethyl paraben and propyl paraben were detected in domestic wastewater at levels of 1.8 µg/L and 0.4 µg/L, respectively. Recoveries in real samples ranged from 80.7% to 117.5% with RSDs between 0.2% and 8.8%.

Limitations and Future Work

  • Limitations: While the method demonstrates good performance, the paper notes that the magnetic saturation of Fe₃O₄@TbBd is lower than that of bare Fe₃O₄ nanoparticles due to the COF coating. However, it is still sufficient for practical applications. The paper also mentions that in some real samples, certain parabens were not detected (N.D.), which is a limitation of the detection capabilities for very low concentrations in those specific matrices.
  • Future Work: The authors suggest that this method has good potential for the determination of parabens in environmental water samples due to its operational simplicity, short extraction time, high sensitivity, and environmental friendliness. Further applications to a wider range of environmental matrices and potentially other emerging contaminants could be explored. The development of even more efficient and selective COF-based magnetic adsorbents could also be a future direction.

Summary updated

Abstract

Parabens are a class of antimicrobial preservatives that are widely used in cosmetics, pharmaceuticals, and food products because of their ease of production, antimicrobial effect, and low price. The widespread use of these parabens, poses potential risks to human health. Therefore, it is necessary to establish a simple and rapid method for the detection of parabens. The large number of substrate interferences in complex samples is an important factor affecting the sensitivity of analytical methods. Magnetic solid-phase extraction (MSPE) has received much attention because of its advantages of easy operation, short extraction time, small sample amount, low cost, and environmental friendliness. Covalent organic frameworks (COFs) with high crystallinity, high specific surface area, adjustable pore size, regular porosity, as well as high chemical and thermal stability are now widely used in separation and analysis. Therefore, a sample pretreatment method combining MSPE and COF for the analysis of parabens in complex matrices is very promising. A magnetic covalent organic framework, Fe<sub>3</sub>O<sub>4</sub>@TbBd, was successfully synthesized by the Schiff base reaction of 1,3,5-triformylbenzene (Tb) and benzidine (Bd) at room temperature using Fe<sub>3</sub>O<sub>4</sub> nanoparticles as magnetic cores. Characterization by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) measurements, etc. revealed that the magnetic COF has high magnetic responsiveness, as well as good thermal and chemical stability, which make it an ideal adsorbent for the MSPE of parabens. Some factors related to the extraction efficiency, including the amount of adsorbent, extraction time, pH, desorption solvent, desorption time, and number of desorption were systematically investigated. A method involving MSPE and high performance liquid chromatography-ultraviolet detection (HPLC-UV) based on the Fe<sub>3</sub>O<sub>4</sub>@TbBd was developed for the determination of four parabens (ethylparaben, propylparaben, butylparaben, and benzylparaben) in environmental water samples. Under the optimal extraction conditions, the method showed good linearities. The limits of detection and limits of quantification were 0.2-0.4 μg/L and 0.7-1.4 μg/L for the four analytes, respectively. The recoveries at three spiked levels were in the range of 86.1%-110.8% with intra-day and inter-day RSDs of less than 5.5% and 4.9%, respectively. The method was successfully applied to the determination of parabens in East Lake water, Yangtze water, and domestic wastewater. Ethyl paraben and propyl paraben were detected in domestic wastewater at the levels of 1.8 μg/L and 0.4 μg/L, respectively. The recoveries of the parabens at different spiked levels ranged from 80.7% to 117.5%, with RSDs of 0.2%-8.8%. The method has good potential for the determination of parabens in environmental water samples because of its operational simplicity, short extraction time, high sensitivity, and environmental friendliness.
BibTeX
@inproceedings{bao2022analysis,
  author = {Yue Bao and Yixin Zhai and Ning Tao and Pin Chen and Shukui Zhu},
  title = {{Analysis of parabens in environmental water samples by covalent organic framework-based magnetic solid-phase extraction-high performance liquid chromatography}},
  booktitle = {Chinese},
  year = {2022},
  doi = {10.3724/sp.j.1123.2022.06006},
}
Figure