Analysis of Emulsion Compositionand the Migration and Transformationin Mine Water

Youli Qiu, Chao Yang, Min Wu, Jie Li, Ruimin He, Chunming Hao, Xing FanPolish 2024 · DOI

Abstract

In this study, emulsion and mine water samples were collected from the Daliuta area, and the emulsion composition was analyzed. The typical pollutants in the emulsion were triethanolamine, sodium benzoate, sodium nitrite, and sodium hyponitrotriacetate. Furthermore, migration and transformation studies were conducted with respect to these typical pollutants in the emulsion. When the mine water was passed through the aeration zone of a water accumulation leaching device, the pollutant concentrations considerably decreased, resulting in significant adsorption and migration effects. Subsequently, the adsorption effect was significantly reduced. The adsorption rate of sodium benzoate and sodium hyponitrotriacetate increased with an increase in the emulsion concentration on the 30th day. The adsorption rate of sodium nitrite in 1 L mine water with 20 mL emulsion on the 30th day was 86.4%. The noncarcinogenic health risk assessment and exposure index (EI) model calculations of the simulated mine water containing emulsion revealed that all the hazard quotient (HQ) and EI values of carcinogens were >1. Furthermore, reference pollutant concentrations under the specific conditions of HQ and EI were obtained. These study findings are expected to provide scientific data support for local governments to strengthen geological environment management in mining areas.

Introduction

In the coal mining industry, emulsions are indispensable for lubrication, cooling, and hydraulic systems. However, these complex chemical mixtures frequently leak into mine water and surrounding groundwater. Because many emulsifiers are protected by patents, their exact chemical compositions are often unknown to the environmental engineers tasked with remediation. This study addresses two critical gaps: identifying the specific chemical components of these emulsions and understanding how they migrate and transform within the complex environment of a mine's water system.

Methods

The researchers employed a multi-pronged analytical approach to deconstruct the "original emulsion" using advanced techniques such as Nuclear Magnetic Resonance (NMR), Mass Spectrometry (MS), and Gas Chromatography–Mass Spectrometry (GC–MS).

To simulate the environmental fate of these chemicals, a "water accumulation leaching device" was constructed. This device utilized seepage columns filled with sand, stone, and coal to replicate the aeration zone of an underground aquifer.

Experimental setup of the water accumulation leaching device used to simulate the aeration zone.

Experiments were conducted over a 30-day period using primary samples collected from the Daliuta mining area in China. Various concentrations of emulsion (1 mL to 20 mL per liter of mine water) were tested to track the migration of four target pollutants: Triethanolamine (TEOA), sodium benzoate, sodium nitrite, and sodium hyponitrotriacetate. Finally, health risk assessments were performed using US EPA models to calculate the Hazard Quotient (HQ) and Exposure Index (EI) for various age groups.

Results and Discussion

Chemical Composition

The analysis revealed that the emulsion is approximately 84-85% water, with the remainder consisting of complex inhibitors, preservatives, and surfactants. GC-MS analysis was instrumental in identifying ten specific chemical components within the mixture.

GC-MS chromatogram identifying various chemical components within the mine water emulsion.

Migration and Transformation

The simulated aeration zone initially showed high effectiveness in reducing pollutant concentrations through adsorption and microbial action. However, as the filtration media became saturated, adsorption rates declined. Notably, the concentration of TEOA was observed to increase in some samples after an initial drop, likely due to the hydrolysis of TEOA borate ester during the migration process.

By the 30th day, the adsorption rate of sodium nitrite in high-concentration samples (20 mL emulsion/L) reached 86.4%. Despite these reductions, the resulting water quality remains a concern.

Health Risk Assessment

The health risk assessment indicated significant non-carcinogenic risks. For the simulated mine water, both HQ and EI values exceeded 1 for all tested pollutants across all population groups. In toxicological terms, a value greater than 1 represents an unacceptable level of risk. The study established reference "safe" concentrations for different demographics; for instance, the threshold for sodium nitrite in infants was determined to be 2.40 mg/L.

Conclusion

This study provides a detailed analysis of the chemical makeup and environmental behavior of mining emulsions. While natural processes in the aeration zone can mitigate some pollution, the persistent health risks highlight the need for more stringent monitoring and targeted treatment strategies. Future research should focus on long-term field validation and the development of specific remediation technologies to address the primary pollutants identified.

Summary updated

Abstract

In this study, emulsion and mine water samples were collected from the Daliuta area, and the emulsion composition was analyzed.The typical pollutants in the emulsion were triethanolamine, sodium benzoate, sodium nitrite, and sodium hyponitrotriacetate.Furthermore, migration and transformation studies were conducted with respect to these typical pollutants in the emulsion.When the mine water was passed through the aeration zone of a water accumulation leaching device, the pollutant concentrations considerably decreased, resulting in significant adsorption and migration effects.Subsequently, the adsorption effect was significantly reduced.The adsorption rate of sodium benzoate and sodium hyponitrotriacetate increased with an increase in the emulsion concentration on the 30th day.The adsorption rate of sodium nitrite in 1 L mine water with 20 mL emulsion on the 30 th day was 86.4%.The noncarcinogenic health risk assessment and exposure index (EI) model calculations of the simulated mine water containing emulsion revealed that all the hazard quotient (HQ) and EI values of carcinogens were >1.Furthermore, reference pollutant concentrations under the specific conditions of HQ and EI were obtained.These study findings are expected to provide scientific data support for local governments to strengthen geological environment management in mining areas.
BibTeX
@inproceedings{qiu2024analysis,
  author = {Youli Qiu and Chao Yang and Min Wu and Jie Li and Ruimin He and Chunming Hao and Xing Fan},
  title = {{Analysis of Emulsion Compositionand the Migration and Transformationin Mine Water}},
  booktitle = {Polish},
  year = {2024},
  doi = {10.15244/pjoes/177151},
}
Figure