Analysis and optimization of energy efficiency for an electric vehicle with four independent drive in-wheel motors

Xinwei Jiang, Long Chen, Xing Xu, Yingfeng Cai, Yong Li, Wujie WangAdvances 2018 · DOI

Abstract

The independent driving ability of the four-wheel independent drive electric vehicles can be used to improve the energy efficiency of the vehicle. The composition and structure of a prototype were introduced in this article and the rapid prototype was applied to design the upper-level control system. Experimental data obtained from the bench tests and the chassis dynamometer tests were employed to generate the torque response performance and power efficiency map of the in-wheel motor. The control logic of the in-wheel motor was obtained based on the least squares method. Besides, a front and rear axle torque distribution method was proposed to reduce the energy consumption of vehicle, and the simulating test of the prototype was conducted based on the in-wheel motor efficiency map. Simulation analysis of vehicle energy consumption in vehicle driving cycle was carried out in ways of rear axle drive, average torque allocation, and optimized torque energy-saving allocation; the results show that the optimized torque energy-saving allocation strategy can decrease the energy consumption up to approximately 0.117 and 0.426 kJ per unit mileage comparing with the rear axle drive and average torque allocation.
BibTeX
@inproceedings{jiang2018analysis,
  author = {Xinwei Jiang and Long Chen and Xing Xu and Yingfeng Cai and Yong Li and Wujie Wang},
  title = {{Analysis and optimization of energy efficiency for an electric vehicle with four independent drive in-wheel motors}},
  booktitle = {Advances},
  year = {2018},
  doi = {10.1177/1687814018765549},
}

Loading related content...

Figure