An Ultrasonic Microrobot Enabling Ultrafast Bidirectional Navigation in Confined Tubular Environments

Meng Cui, Liyun Zhen, Xingyu Bai, Li Yu, Xuhao Chen, Jingquan Liu, Qingkun Liu, Bin YangNano-Micro 2025 · DOI

TL;DR

Researchers have developed an ultra-thin, ultrasonic microrobot capable of incredibly fast, bidirectional navigation within confined pipelines. This MEMS-fabricated device achieves unprecedented speeds of 81 cm/s and operates at a remarkably low voltage, making it a promising candidate for efficient inspection of critical infrastructure like nuclear power plants and chemical factories.

What Problem Does This Paper Address?

Pipelines are ubiquitous in industries ranging from energy to healthcare, but their inspection and maintenance are challenging. These systems often feature complex geometries, tight spaces, and millimeter-scale dimensions that are difficult or impossible for conventional inspection methods to access. Existing microrobots, while offering potential, often suffer from limitations such as slow speeds, high power requirements, or incompatibility with certain pipe materials. The authors aim to overcome these challenges by developing a microrobot that is fast, agile, low-power, and adaptable to various pipeline environments.

Methods

The core of this microrobot's innovation lies in its ultrasonic actuation and piezoelectric composite film microstructure.

  • Ultrasonic Actuation: Instead of relying on low-frequency vibrations, the robot operates at ultrasonic frequencies (above 20 kHz). This allows it to leverage complex, high-order vibration modes that generate faster motion with smaller amplitudes. Crucially, ultrasonic frequencies help reduce interface friction by inducing rapid micro-vibrations, leading to more efficient propulsion.
  • Piezoelectric Composite Film Microstructure: The robot is built using a thin film of lead zirconate titanate (PZT), a material with a high piezoelectric coefficient, bonded to a flexible polyethylene terephthalate (PET) substrate. This composite structure, fabricated using MEMS technology, allows for controlled elongation and contraction under an applied voltage.
  • MEMS Fabrication: The fabrication process involves precise layering and patterning of PZT, conductive epoxy, and electrode materials, followed by encapsulation with a parylene-C film for protection. This miniaturized approach enables the robot's ultrathin profile (210 µm).
  • Bidirectional Control: The direction of motion is controlled by simply modulating the driving frequency. This is a key advantage for inspection tasks, allowing the robot to move forward and backward without complex mechanical reconfigurations.
  • Micro-Endoscope Integration: For practical inspection, a micro-endoscope camera is integrated into the robot, enabling real-time imaging within the pipeline.

Datasets

Not discussed in the paper. The research focuses on experimental characterization and performance evaluation of the developed microrobot.

Key Insights and Ideas

  • Ultrasonic Frequencies Unlock Speed: The paper demonstrates that operating at ultrasonic frequencies, rather than lower frequencies, is key to achieving exceptionally high speeds in microrobots. This is achieved by exploiting complex vibration modes and reducing friction.
  • Frequency Modulation for Bidirectional Control: The ability to switch between forward and backward motion by simply adjusting the driving frequency is a significant practical advantage for inspection tasks, enhancing efficiency and maneuverability.
  • Low Voltage, High Performance: The microrobot achieves impressive speeds and capabilities with a remarkably low driving voltage (as low as 3 Vp-p), making it safer and more energy-efficient than many existing solutions.
  • Robustness in Challenging Environments: The robot's ability to navigate curved pipes, pipes of various materials, and even climb slopes up to 24.25° highlights its versatility and resilience.
  • Impressive Load-Bearing Capacity: The microrobot can carry over 36 times its own weight, a testament to its robust design and actuation mechanism.

Key Results

  • Maximum Speed: Achieved an unprecedented speed of 81 cm/s at 54.8 kHz, which is 57% faster than previously reported piezoelectric microrobots.
  • Minimum Driving Voltage: Capable of initial motion at a low voltage of 3 Vp-p.
  • Narrow Pipe Navigation: Successfully navigated pipes with a height of only 4 mm at a speed of 34.3 cm/s.
  • Slope Climbing: Effortlessly climbed slopes up to 24.25°.
  • Load Carrying: Carried loads exceeding 36 times its weight while maintaining a speed of 11.5 cm/s.
  • Material Adaptability: Navigated through pipes made of acrylic, stainless steel, and polyvinyl chloride.
  • Water Navigation: Demonstrated motion over water by adjusting the driving frequency to 1 kHz.
  • Real-time Imaging: Integrated micro-endoscope camera enabled real-time image capture inside glass pipes.

Limitations and Future Work

The authors acknowledge a few limitations and suggest future directions:

  • Tethered Operation: The current robot relies on external electrode wires for power, limiting its range for long-distance inspections.
  • Image Jitter: When moving at high speeds with the integrated camera, image jitter was observed, suggesting the need for anti-shake mechanisms or slower controlled motion for stable imaging.

Future work will focus on:

  • Onboard Power and Communication: Equipping the robot with miniature onboard power supply circuits, communication modules, and micro-batteries to enable untethered, remote-controlled autonomous operation.
  • Structural Design and Power Density: Optimizing the structural design and incorporating higher power density driving units to further enhance driving performance.
  • Advanced Imaging: Utilizing wireless high-speed miniature cameras and anti-shake mechanisms for improved inspection capabilities.

Summary updated

Abstract

Pipelines are extensively used in environments such as nuclear power plants, chemical factories, and medical devices to transport gases and liquids. These tubular environments often feature complex geometries, confined spaces, and millimeter-scale height restrictions, presenting significant challenges to conventional inspection methods. Here, we present an ultrasonic microrobot (weight, 80 mg; dimensions, 24 mm × 7 mm; thickness, 210 μm) to realize agile and bidirectional navigation in narrow pipelines. The ultrathin structural design of the robot is achieved through a high-performance piezoelectric composite film microstructure based on MEMS technology. The robot exhibits various vibration modes when driven by ultrasonic frequency signals, its motion speed reaches 81 cm s<sup>-1</sup> at 54.8 kHz, exceeding that of the fastest piezoelectric microrobots, and its forward and backward motion direction is controllable through frequency modulation, while the minimum driving voltage for initial movement can be as low as 3 V<sub>P-P</sub>. Additionally, the robot can effortlessly climb slopes up to 24.25° and carry loads more than 36 times its weight. The robot is capable of agile navigation through curved L-shaped pipes, pipes made of various materials (acrylic, stainless steel, and polyvinyl chloride), and even over water. To further demonstrate its inspection capabilities, a micro-endoscope camera is integrated into the robot, enabling real-time image capture inside glass pipes.
BibTeX
@inproceedings{cui2025ultrasonic,
  author = {Meng Cui and Liyun Zhen and Xingyu Bai and Li Yu and Xuhao Chen and Jingquan Liu and Qingkun Liu and Bin Yang},
  title = {{An Ultrasonic Microrobot Enabling Ultrafast Bidirectional Navigation in Confined Tubular Environments}},
  booktitle = {Nano-Micro},
  year = {2025},
  doi = {10.1007/s40820-025-01894-y},
}
Figure