TL;DR
This review provides a comprehensive overview of sandbox experiments used to study ground heat exchangers (GHEs), a key component of energy-efficient ground-source heat pump systems. By categorizing and summarizing existing research on borehole and energy pile experiments, the paper highlights their importance in understanding heat transfer and validating simulation models, ultimately aiming to promote wider adoption of these sustainable technologies.
What Problem Does This Paper Address?
Ground-source heat pumps (GSHPs) are crucial for reducing building energy consumption and achieving carbon neutrality. However, the performance of GSHPs heavily relies on the efficiency of their ground heat exchangers (GHEs). While simulation models are useful, they often require experimental validation. Field tests are expensive and difficult to control. Sandbox experiments offer a controllable and repeatable environment to study GHEs, but a consolidated understanding of the various experimental approaches and their findings has been lacking. This paper addresses this gap by systematically reviewing and categorizing existing sandbox experiments for GHEs, providing a valuable resource for researchers and practitioners.
Methods
The paper categorizes sandbox experiments into two main types: borehole sandbox experiments and energy pile sandbox experiments.
Borehole sandbox experiments are further classified into:
- Single borehole experiments: Focus on individual borehole heat transfer mechanisms.
- Borehole group experiments: Investigate the thermal interference between multiple boreholes.
- Seepage experiments: Simulate the impact of groundwater flow (vertical and horizontal) on heat transfer.
- Multi-layer soil experiments: Examine heat transfer in soil with varying thermal properties.
Energy pile sandbox experiments are divided into:
- Mechanical performance tests: Assess the impact of thermal cycles and loads on pile settlement and bearing capacity.
- Thermal performance tests: Study heat transfer characteristics under various operating conditions.
- Thermal-mechanical coupled performance tests: Investigate the interplay between thermal and mechanical behavior.
For each category, the review details the sandbox design, experimental setup, testing conditions, and analysis of results.
Datasets
Not discussed in the paper. The paper is a review of existing experimental studies, not a presentation of new experimental data.
Key Insights and Ideas
- Spiral tubes outperform U-tubes: For single boreholes, spiral tubes show superior heat exchange efficiency compared to single U-tubes, with double spiral tubes being even more effective (e.g., 80% higher efficiency than single spiral tubes).
- Seepage significantly enhances heat transfer: Both vertical and horizontal seepage flows improve heat transfer capacity and lead to more uniform soil temperature distribution, with heat transfer being intensified in the direction of seepage.
- Soil layering matters: The thermal conductivity of different soil layers has a significant impact on overall GHE performance, with the lower soil layers showing a particularly noteworthy influence.
- Energy piles offer higher heat transfer rates: Compared to boreholes, energy piles, with their larger diameter and shorter length, generally achieve higher heat transfer rates.
- Thermal cycling affects pile integrity: Repeated heating and cooling cycles in energy piles can lead to irreversible settlement and affect their bearing capacity, especially under higher loads.
- Radial heat transfer is more dominant in energy piles: The heat transfer distance in the radial direction for energy piles is significantly greater than in the vertical direction.
Key Results
- Borehole experiments: Demonstrated that increasing spiral pitch and tube spacing can enhance heat transfer. Seepage experiments showed that higher seepage velocities lead to reduced soil temperature variations and increased heat transmission distance in the seepage direction. Multi-layer soil experiments revealed that lower soil layers with higher thermal conductivity significantly improve heat transfer coefficients.
- Energy pile experiments: Showed that the settlement of energy piles increases with higher head loads and thermal cycles. The W-type energy pile exhibited the highest heat exchange rate among tested configurations, while the single U-shaped pile had the lowest. Thermal cycling in energy piles can cause soil to dry and wet, impacting volumetric water content and temperature.
Limitations and Future Work
The authors identify several challenges and limitations in current sandbox experiments:
- Similarity issues: Establishing true similarity for practical projects with deep, narrow boreholes is difficult, potentially limiting the applicability of experimental data.
- Measurement accuracy: The small scale of sandboxes restricts heat duty and accurate temperature measurements, affecting the direct applicability of results.
- Boundary condition control: Precisely maintaining idealized adiabatic and isothermal boundaries is challenging.
- Soil property testing: Low accuracy in soil thermophysical property testing, influenced by sampling and soil compactness, is a concern.
Future research directions suggested include:
- Investigating GHEs under more complex environmental conditions, such as three-dimensional seepage and multi-layered soils, and exploring seepage in shallow boreholes.
- Studying novel composite energy geostructures (energy piles, walls, tunnels) and their integration with boreholes.
- Exploring the use of new materials like nanofluids and phase change materials to enhance heat transfer and mitigate soil temperature variations.
- Conducting experiments on new technologies and materials to verify their feasibility and performance.
Summary updated