An Optimal Distribution Model of Emergency Materials Based on Disaster Weather

Guanghui WangAmerican 2019 · DOI

Abstract

Effective support of emergency materials is a prerequisite for post-disaster rescue. This paper addresses the optimization of transportation from supply points to distribution centers, accounting for road resistance, weather-driven speed attenuation, and disaster intensity. By minimizing the sum of transportation, construction, and time penalty costs, the proposed mixed-integer linear programming (MILP) model provides a scientific basis for resilient logistics planning.

The Challenge of Post-Disaster Logistics

In the immediate aftermath of a natural disaster, the logistics of delivering food, water, and medical supplies is a race against time. This process typically occurs in two stages: moving materials from national supply points (SPs) to regional distribution centers (DCs), and then from those DCs to specific rescue points (RPs) within the disaster zone.

Schematic of the emergency material distribution network.

Most existing models focus on minimizing distance or standard costs. However, disasters create chaotic environments where weather conditions and road damage (disaster intensity) significantly degrade vehicle speeds. Ignoring these variables leads to "optimal" plans that fail in reality due to underestimated travel times and the high social cost of delivery delays.

Methodology: Integrating Environmental Factors

The study constructs a multi-objective optimization model formulated as a mixed-integer linear programming (MILP) problem. The objective function minimizes the Total Cost (TC), which comprises:

  1. Transportation costs: Based on actual travel time and distance.
  2. Fixed investment costs: The expense of establishing distribution centers.
  3. Variable processing costs: Handling expenses at the DCs.
  4. Time penalty costs: A penalty for every hour a delivery exceeds the expected arrival window.

The model's innovation lies in its calculation of transportation speed. It uses an attenuation factor ($\theta$) and disaster intensity ($r_{ki}$) to adjust maximum speeds. By linking these environmental factors directly to unit costs and time penalties, the algorithm avoids high-risk or weather-impacted routes, even if they are geographically shorter.

Key Results and Sensitivity Analysis

The model was validated using a numerical simulation involving 4 supply points, 4 potential distribution centers, and 8 rescue points. The results highlight that weather is a critical mathematical weight rather than just an inconvenience.

Total Cost (TC) as a function of the weather attenuation coefficient ($\theta$).

As shown in the experimental data, there is a near-linear relationship between the weather attenuation coefficient and the total distribution cost. As weather conditions worsen (higher $\theta$), costs rise predictably. Sensitivity analysis revealed that while traffic flow ratios have minor impacts on DC selection, weather and road intensity are decisive. For instance, increasing the attenuation factor from 40 to 80 caused the model to entirely reconfigure the network, dropping certain distribution centers in favor of more "weather-resilient" hubs.

Conclusion and Future Directions

The proposed model successfully prioritizes routes with lower disaster intensity, aligning mathematical optimization with the intuitive logic of avoiding damaged infrastructure. However, the current model assumes static meteorological conditions. Future research should explore dynamic, hour-by-hour weather updates and multi-modal transport options (e.g., air or rail) for scenarios where road intensity leads to total blockage. Testing against historical data from real-world events like major hurricanes would further validate its predictive power for emergency response.

Summary updated

Abstract

Effective support of emergency materials is a necessary prerequisite for post-disaster emergency rescue. The transportation and distribution of post-disaster emergency materials includes two stages: from storage warehouses and material distribution centers outside the disaster area to emergency distribution centers outside the disaster area, and from emergency distribution centers to rescue points in the disaster area. Emergency material support has the characteristics of urgent demand and relative shortage of materials. Especially, the transportation of materials from supply points outside the disaster-stricken areas to emergency material distribution centers, along the way, affected by the actual traffic capacity and meteorological conditions, will have a significant impact on the efficient distribution of emergency materials. This paper deals with the optimization of transportation allocation from emergency material supply points to emergency material distribution centers in the periphery of disaster areas. Based on the factors affecting transportation efficiency such as road resistance parameters, attenuation coefficient, and disaster intensity, an optimal allocation model of emergency materials is established, which minimizes the sum of transportation cost, construction cost of distribution center, and penalty cost of transportation time. The validity and feasibility of the model are analyzed and studied by an example. The experimental results show that the attenuation coefficient of the transportation line and the disaster intensity of the road section have important influence on the emergency material allocation scheme. The emergency material allocation scheme formulated by the optimization model is scientific and reasonable.
BibTeX
@inproceedings{wang2019optimal,
  author = {Guanghui Wang},
  title = {{An Optimal Distribution Model of Emergency Materials Based on Disaster Weather}},
  booktitle = {American},
  year = {2019},
  doi = {10.12691/ajeee-7-3-5},
}
Figure