An investigation into the development of a miniature Piezoelectric pump

Lei MengTuwhera 2012

TL;DR

This thesis explores the development of miniature piezoelectric pumps for CPAP systems, focusing on optimizing air flow rate and pressure. The research demonstrates that piezoelectric fans can be effectively configured in parallel and series to achieve desired performance, with vibration frequency and channel geometry playing crucial roles in pump output.

What Problem Does This Paper Address?

Obstructive Sleep Apnea Syndrome (OSAS) is a widespread disorder affecting millions, and current treatments like CPAP (Continuous Positive Airway Pressure) systems, while effective, can be bulky and sometimes uncomfortable. This research aims to improve CPAP systems by developing a miniaturized, efficient air delivery unit (ADU) using piezoelectric micropumps. The challenge lies in understanding and controlling the complex interplay of factors influencing the air flow rate and pressure generated by these small-scale pumps to meet the demands of a CPAP system.

Methods

The study investigates piezoelectric fans as the core component for generating airflow. Key methods include:

  • Experimental Characterization: Single and multiple piezoelectric fans were tested in various configurations (parallel, series) to measure air flow rate and pressure under different input voltages and frequencies.
  • Mathematical Modeling: A mathematical model of the piezoelectric fan was developed to analyze its dynamic behavior and optimize performance.
  • Fluid Flow Simulation: Finite element analysis was used to simulate fluid flow within the pump channel, aiding in understanding the impact of geometry on performance.
  • Prototype Development: Prototypes of the micropump were designed and built to validate experimental findings and simulation results.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Frequency is King (for Pressure): The research highlights that vibration frequency has a more significant impact on the attainable pressure of the piezoelectric pump than the amplitude of vibration. This is a crucial insight for controlling pump output.
  • Parallel for Flow, Series for Pressure: A key finding is that parallel configurations of piezoelectric fans, when excited in phase, yield higher flow rates compared to opposite phase excitation or series configurations. However, series configurations are better suited for generating higher air pressure.
  • Geometry Matters: The shape and dimensions of the flow channel, inlet, and outlet significantly influence the pump's air flow rate and pressure. This suggests that careful design of these components is critical for optimization.
  • Resonance is Key: Similar to many oscillating systems, piezoelectric fans perform optimally when driven at their resonance frequency, leading to maximum vibration amplitude and, consequently, higher air flow.

Key Results

  • The study successfully demonstrated the feasibility of using piezoelectric fans for micropump applications in CPAP systems.
  • Parallel configurations of two piezoelectric fans achieved a maximum flow rate of 8.6 L/min, while series configurations reached a maximum air pressure of 0.3 Pa.
  • A new prototype with an "open angle" in parallel configuration showed significant improvement, generating higher flow rates due to enhanced vortex interaction.
  • The research established a general relationship between pressure and flow rate, suggesting that increasing flow rate generally leads to a decrease in pressure, and vice-versa.

Limitations and Future Work

The authors acknowledge that the developed micropump, while promising, still requires enhancement in maximum air pressure to fully meet the requirements for delivering air and droplets into a nasal mask. Future work should focus on:

  • Enhancing Air Pressure: Further development is needed to increase the air pressure output of the micropump.
  • Improving Piezoelectric Fan Efficiency: Optimizing the piezoelectric fan itself for better performance and efficiency.
  • Power Supply Compatibility: Adapting the system for operation under New Zealand's power supply standards.
  • Exploring New Configurations: Investigating other configurations and materials for piezoelectric fans to further refine pump performance.

Summary updated

Abstract

This thesis is aimed at improving the understanding and effectiveness in operating of the micropump in CPAP system. The principle objectives were to understand the air flow rate and air pressure of a micropump designs for the CPAP System.
\n
\nThe feasibility of developing a micropump using piezoelectric fans was investigated. Input frequencies and voltages were quantified for different chambers of micropump, discharge air flow rates and air pressure. The effect of these parameters on flow rate and air pressure was determined.
\nTo test the effect of air flow and air pressure produced by the micropump, a mathematical model of piezoelectric fan is developed.
\nThe experimental results with dynamic characteristics of air flow resulted in the following conclusions.
\n1. The vibration frequency is influential in determining the attainable pressure compared to the vibration amplitude.
\n2. The parallel configuration of two piezoelectric fans excited with the same phase yields more flow rate than excited with opposite phase. The parallel configuration yields more flow rate than series configuration, but the series configuration yields higher air pressure.
\n3. The shapes of the flow channel, inlet and outlet have significant influence on the air flow rate and pressure.
BibTeX
@inproceedings{meng2012investigation,
  author = {Lei Meng},
  title = {{An investigation into the development of a miniature Piezoelectric pump}},
  booktitle = {Tuwhera},
  year = {2012},
}

Loading related content...

Figure