An Indefinite Cycle Traffic Light Timing Strategy

Ping Guo, Daiwen Lei, Lian YeInternational Journal of Advanced Computer Science and Applications 2018 · DOI

Abstract

Intelligent transportation signal control plays an important role in reducing traffic congestion and improving road capacity. The key of signal control is to adjust the traffic lights appropriately according to the traffic flow, which is an adaptive control. In this paper, we propose a new timing strategy. This strategy includes green time optimization and lane combination calculation. According to the real-time traffic flow, we optimize green time and calculate lane combination to adjust the cycle and then we can get the timing plan. The simulation results of random data and actual traffic data show that the strategy we proposed can increase traffic efficiency by more than 15% at intersections, reduce vehicle detention, and relieve traffic congestion.

Introduction

Urban traffic congestion is more than a daily inconvenience; it represents a significant economic and environmental burden. Conventional traffic signal control systems typically rely on fixed timing, induction sensors, or basic adaptive methods. However, many existing adaptive systems remain constrained by rigid cycle lengths and pre-defined phases. When traffic demand is highly asymmetrical—such as a heavy surge on one approach while others remain empty—these rigid structures waste "green time" on unoccupied lanes.

This research introduces an "Indefinite Cycle" strategy, termed the Improved Timing Plan (ITP). Unlike traditional methods, ITP abandons fixed cycles in favor of a fluid system that dynamically adjusts both green light durations and lane groupings based on real-time demand.

Methodology

The ITP strategy is built upon two core mechanisms: Green Time Optimization and Dynamic Lane Combination.

Green Time Optimization

The system calculates the optimal green time for each lane ($L_j$) by comparing current traffic rates to the intersection's saturation flow. To prevent "jitter"—frequent, minor timing adjustments that could destabilize traffic flow—the algorithm employs two threshold parameters, $\mu$ and $\lambda$. These parameters dictate whether the system should extend, shorten, or maintain the current green duration.

Dynamic Lane Combination

A novel aspect of this strategy is the abandonment of pre-set phases. Instead, the algorithm identifies "compatible lanes"—those that can move simultaneously without collision risk. As illustrated in Figure 1, the intersection is modeled with eight distinct lanes ($L_1$ through $L_8$).

Intersection layout showing lanes $L_1$ through $L_8$ used for dynamic lane combination.

The algorithm selects a "main lane" based on the highest demand and pairs it with a compatible lane to form a temporary phase. This process repeats until all lanes have been serviced, effectively constructing a custom cycle for every iteration. To ensure safety and predictability, the system maintains a minimum green time ($T_g$) for all lanes, even under low-demand conditions.

Results and Discussion

The ITP was evaluated against a standard Fixed Timing Plan (FTP) using both randomly generated and real-world traffic data. In simulations spanning 50 cycles, the ITP demonstrated superior performance across all metrics.

Efficiency and Throughput

For random data, traffic efficiency improved by 19.9%, while real-world data showed a 17.2% increase. Overall throughput—the number of vehicles successfully traversing the intersection—rose by approximately 16.6% to 20.3%.

Congestion Relief

One of the most significant advantages of the ITP is its ability to prevent the accumulation of "retained vehicles" (backlog). As shown in Figure 2, the FTP model leads to a steady increase in vehicle detention over time, indicating growing congestion. In contrast, the ITP model maintains a consistently low backlog, demonstrating its capacity to actively clear the intersection rather than merely managing the queue.

Comparison of vehicle retention between the Improved Timing Plan (ITP) and Fixed Timing Plan (FTP), showing ITP's ability to prevent backlog accumulation.

Conclusion

The Indefinite Cycle strategy represents a significant step toward truly intelligent traffic management. By allowing cycle lengths and lane combinations to fluctuate within safe bounds ($T_{min}$ to $T_{max}$), the system can "stretch" or "compress" flow to match reality. While future work is needed to integrate pedestrian dynamics and refine the "main lane" selection process, the current results prove that moving beyond fixed cycles can substantially reduce urban congestion.

Summary updated

Abstract

Intelligent transportation signal control plays an important role in reducing traffic congestion and improving road capacity. The key of signal control is to adjust the traffic lights appropriately according to the traffic flow, which is an adaptive control. In this paper, we propose a new timing strategy. This strategy includes green time optimization and lane combination calculation. According to the real-time traffic flow, we optimize green time and calculate lane combination to adjust the cycle and then we can get the timing plan. The simulation results of random data and actual traffic data show that the strategy we proposed can increase traffic efficiency by more than 15% at intersections, reduce vehicle detention, and relieve traffic congestion.
BibTeX
@article{guo2018indefinite,
  author = {Ping Guo and Daiwen Lei and Lian Ye},
  title = {{An Indefinite Cycle Traffic Light Timing Strategy}},
  journal = {International Journal of Advanced Computer Science and Applications},
  year = {2018},
  doi = {10.14569/ijacsa.2018.090567},
}
Figure