An Experiment and Simulation Study on the Tensile Behavior of Cotton Ring-Spun Yarn with Twisted Staple Fibers

Xiaoshuang Xiong, Shuyang Wu, Lingyao Zeng, Jiacheng Zhou, Zhiwei Hou, Xiang Li, Minglong Chen, Chen Shen, Fei FanMaterials 2026 · DOI

TL;DR

This paper presents a comprehensive study on the tensile behavior of cotton ring-spun yarn, combining experimental testing, finite element (FE) simulations, and a novel theoretical model. The research reveals that yarn structure, specifically twist angle and inter-fiber friction, significantly impacts tensile properties, while yarn length and tensile speed have minimal effects. A modified "rule-of-mixtures" equation is proposed, offering a more accurate and computationally efficient way to predict yarn tensile modulus.

What Problem Does This Paper Address?

Cotton ring-spun yarn is a ubiquitous material in textiles, yet its mechanical behavior, particularly under tensile stress, is complex due to the intricate interplay of its constituent fibers. Understanding this behavior is crucial for optimizing textile manufacturing processes and developing high-performance fabrics. Previous studies often simplified yarn structure or neglected critical factors like inter-fiber friction. This paper aims to bridge this gap by providing a more holistic understanding of cotton yarn's tensile properties, considering microscopic structure, experimental variations, and developing a more accurate predictive model that accounts for inter-fiber friction.

Methods

The researchers employed a multi-pronged approach:

  • Experimental Testing: Tensile tests were conducted on four types of cotton ring-spun yarns using a universal tensile testing system. The influence of yarn length (50-250 mm) and tensile speed (1-3 mm/s) on tensile strength and modulus was investigated.
  • Microscopic Characterization: Scanning Electron Microscopy (SEM) was used to analyze the microscopic geometric morphology of the yarns, providing essential data for building simulation models.
  • Finite Element (FE) Modeling: Detailed FE models of the yarns were constructed based on the SEM data. These models incorporated helical fiber arrangements and allowed for the investigation of parameters like yarn diameter, twist angle, and inter-fiber friction coefficient. The models were validated against experimental results.
  • Theoretical Modeling: A modified "rule-of-mixtures" equation was developed. This equation builds upon existing models by incorporating a friction correction factor to more accurately predict the tensile modulus of twisted yarns.

Datasets

Not discussed in the paper. The study utilized four types of cotton staple ring-spun yarns provided by a specific manufacturer.

Key Insights and Ideas

  • Structure is King: The internal structure of the yarn (twist angle and fiber arrangement) is the dominant factor influencing its tensile strength and modulus. This highlights the importance of controlling spinning parameters.
  • Friction is a Major Player: Inter-fiber friction plays a critical role in the yarn's tensile behavior, significantly affecting its modulus, especially at higher twist angles. This was a factor often overlooked or simplified in previous models.
  • Speed and Length Don't Matter Much (for these conditions): For the tested ranges, yarn length and tensile speed had a negligible impact on tensile properties. This simplifies experimental design and simulation parameter selection.
  • A Better Predictive Tool: The modified "rule-of-mixtures" equation offers a significant improvement over traditional models by accounting for friction, providing a more accurate and computationally efficient alternative to complex FE simulations for predicting tensile modulus.

Key Results

  • Experimental results showed that yarn (Y1) with the smallest diameter (0.112 mm) and lowest twist angle (13.2°) had the highest tensile modulus and strength, while yarn (Y4) with the largest diameter (0.208 mm) and highest twist angle (42.7°) had the lowest.
  • FE simulations with a friction coefficient of 0.5 achieved a good fitting accuracy with experimental results, with a fitting error of less than 2%.
  • The study found that twist angle and friction coefficient are the most significant factors affecting tensile modulus. Yarn diameter had a negligible influence when the twist angle was constant.
  • The tensile modulus decreased significantly with increasing twist angle, particularly beyond 28.9°.
  • The modified "rule-of-mixtures" equation demonstrated higher accuracy in predicting tensile modulus compared to the traditional equation.

Limitations and Future Work

  • Idealized Models: The FE models simplified certain aspects of yarn structure, such as ignoring fiber migrations, variable twist angles across the cross-section, and discontinuous fiber lengths. These simplifications might lead to slightly overestimated tensile moduli.
  • Limited Range of Conditions: The experimental testing focused on specific ranges of yarn length and tensile speed. Further investigation into extreme conditions might reveal different behaviors.
  • Future Work: The authors suggest that the developed numerical modeling method and the modified "rule-of-mixtures" equation can be extended to analyze the mechanical properties of other twisted fiber yarns and composites. This work provides a foundation for further research into material constitutive behavior.

Summary updated

Abstract

This paper investigates the tensile behavior of cotton ring-spun yarn through experimental testing, numerical simulation, and theoretical calculation. Firstly, scanning electron microscope testing of the microscopic geometric morphologies of yarns was performed for the development of basic finite element (FE) models. Then, the influences of tensile speed and yarn length on the tensile properties of yarn were studied using tensile experiments. Numerical simulations were further performed to investigate the effects of yarn diameter, twist angle, and friction between fibers on the tensile modulus of yarn. Finally, a modified 'rule-of-mixtures' equation was proposed to effectively calculate the tensile modulus of yarn through incorporating the friction correction factor. The experimental results show that the tensile modulus and strength of tested yarn are significantly affected by the yarn structure and are not sensitive to the yarn length and tensile speed. Furthermore, the tensile moduli of yarns obtained from the numerical simulations show a good fitting accuracy with those obtained from experimental tests when the friction coefficient is set to 0.5 in the FE models. The simulation results show that the twist angle and friction coefficient are two key factors affecting the tensile modulus of yarn. The modified 'rule-of-mixtures' equation presents better accuracy for the calculation of the tensile modulus of yarn compared with the traditional 'rule-of-mixtures' equation, which can be used to replace the FE modeling and simulation and reduce the computational cost. This work will provide a deeper understanding of the mechanical properties of cotton ring-spun yarns and enhance their application in the textile industry.
BibTeX
@inproceedings{xiong2026experiment,
  author = {Xiaoshuang Xiong and Shuyang Wu and Lingyao Zeng and Jiacheng Zhou and Zhiwei Hou and Xiang Li and Minglong Chen and Chen Shen and Fei Fan},
  title = {{An Experiment and Simulation Study on the Tensile Behavior of Cotton Ring-Spun Yarn with Twisted Staple Fibers}},
  booktitle = {Materials},
  year = {2026},
  doi = {10.3390/ma19030560},
}
Figure