An Exact Analytical Solution for Thermoelastic Response of Clamped Beams Subjected to a Movable Laser Pulse

Xianfeng Yang, Jingxuan Ma, Shoubin Liu, Yun Xing, Jialing Yang, Yuxin SunSymmetry 2018 · DOI

TL;DR

This paper presents an exact analytical solution for the thermoelastic response of a clamped beam subjected to a moving, time-decaying laser pulse. The work considers energy absorption depth and time-decay effects, providing insights into how laser speed and pulse duration influence temperature, deflection, vibration acceleration, and stress, with implications for laser-based manufacturing and microbeam failure.

What Problem Does This Paper Address?

Modern manufacturing processes, such as laser welding and surface treatment, often involve localized heating of materials by moving heat sources, like laser beams. Understanding the resulting thermoelastic response – the interplay between temperature changes and mechanical stress/deformation – is crucial for predicting material behavior, preventing failure, and optimizing processes. While many studies have focused on uniform or pulsed laser sources, fewer have addressed the more realistic scenario of a moving, time-decaying laser pulse. This paper aims to fill that gap by providing an analytical solution for the thermoelastic response of a clamped beam under such conditions, specifically investigating the influence of laser speed and pulse duration on various physical quantities.

Methods

The authors employ a combination of established analytical techniques to solve the governing equations. The heat conduction equation is solved using a Green's function approach, which is well-suited for problems with moving heat sources and specific boundary conditions. For the thermoelastic vibration, Duhamel's method is utilized to incorporate the thermal load derived from the temperature solution into the beam's vibration equation. The vibration equation itself is then solved using a modal superposition method, where the deflection is represented as a sum of spatial modes and time-dependent functions. This analytical framework allows for the derivation of explicit expressions for temperature, deflection, vibration acceleration, and stress.

Datasets

Not discussed in the paper. The study uses material properties of gold for numerical simulations, which are cited from a reference.

Key Insights and Ideas

  • Vibration Frequency Independence: A key finding is that the vibration frequency of the beam is independent of the laser pulse's scanning speed. This suggests that while the amplitude of vibration might change with speed, the fundamental frequency at which it oscillates remains constant.
  • High Vibration Acceleration in Microbeams: Even with small deflections, microbeams can experience very high vibration accelerations. This is a critical factor for understanding potential failure and fracture mechanisms in microscale applications.
  • Stress Components and Dominance: The total stress is a combination of temperature-induced and deformation-induced components. The paper highlights that the dominance of these components can shift depending on the laser pulse's scanning speed and duration. At low speeds, temperature effects are more dominant, while at high speeds, deformation plays a larger role.
  • Impact of Laser Speed on Acceleration: The peak vibration acceleration decreases as the laser pulse's moving velocity increases. This implies that slower laser speeds might lead to higher impact forces on the beam.
  • Influence of Pulse Duration: Increasing the laser pulse duration leads to an increase in compressive stress and a decrease in vibration acceleration. For longer durations, temperature increment becomes the primary driver of stress.

Key Results

  • Analytical expressions for temperature, deflection, vibration acceleration, and stress are derived.
  • Numerical simulations using gold material properties demonstrate the temporal and spatial variations of these quantities.
  • For a laser speed of 20 m/s, vibration acceleration can reach nearly 20 g, indicating a significant impact.
  • The vibration frequency is found to be approximately 2197.8 Hz, independent of laser scanning velocities of 20, 100, and 200 m/s.
  • At low laser speeds (20 m/s), significant compressive stress occurs at the location of maximum temperature (x = vtp), while at higher speeds (200 m/s), stresses are more influenced by deformation and exhibit smaller magnitudes.

Limitations and Future Work

The authors acknowledge that the importance of temperature-induced stress versus deformation-induced stress can differ based on scanning velocity and duration. They also note that the probability of beam failure is highest under laser pulses at low moving speeds due to high vibration acceleration. Future work could explore the effects of different boundary conditions, material properties (e.g., temperature-dependent properties), and more complex laser pulse shapes. Investigating the influence of these factors on fatigue life and failure mechanisms would also be a valuable extension.

Summary updated

BibTeX
@article{yang2018exact,
  author = {Xianfeng Yang and Jingxuan Ma and Shoubin Liu and Yun Xing and Jialing Yang and Yuxin Sun},
  title = {{An Exact Analytical Solution for Thermoelastic Response of Clamped Beams Subjected to a Movable Laser Pulse}},
  journal = {Symmetry},
  year = {2018},
  doi = {10.3390/sym10050139},
}
Figure