Abstract
In Wireless Sensor Networks (WSNs), nodes near a static sink often exhaust their energy prematurely due to heavy relay traffic, a phenomenon known as the "Sink's Neighbor Problem." This paper introduces the Energy Efficient Sink Deployment Scheme (EEDS), which utilizes a mobile sink following a regulated path to distribute energy consumption more evenly across the network. By transitioning from multi-hop to one-hop communication as the sink moves, EEDS significantly extends the network's operational lifespan. Experimental results demonstrate that EEDS can prolong network life by approximately six times compared to static sink configurations and by 48% compared to existing mobile sink strategies like GMRE.
Introduction: The Sink's Neighbor Problem
Wireless Sensor Networks typically rely on battery-powered nodes deployed in environments where recharging is impractical. Most architectures utilize multi-hop transmission, where data from peripheral nodes is relayed through intermediate nodes toward a central sink. This creates a "Hot Spot" or "Sink's Neighbor Problem": nodes closest to the sink bear the burden of relaying the entire network's data in addition to their own. Consequently, these critical nodes fail early, partitioning the network and leaving remaining nodes isolated despite having ample energy.
Proposed Method: EEDS
The EEDS strategy addresses this imbalance by replacing the stationary sink with a Mobile Sink (M-Sink) that follows a regulated trajectory.
Regulated Routing and Topology
EEDS models the monitoring area using a hexagonal topology to ensure maximum coverage. The M-Sink follows a predefined path between seven specific stations rather than moving randomly. This structured approach ensures that all clusters within the network eventually benefit from proximity to the sink.
Communication Protocol
Upon arriving at a station, the M-Sink broadcasts a "Request Message." Nearby nodes respond with their stored data. This approach prioritizes one-hop communication, drastically reducing the energy required for long-distance multi-hop relays. If no data is available after a set interval, the sink moves to the next station to minimize idle time and maintain high energy efficiency.
Performance Evaluation
The EEDS scheme was evaluated using NS2 simulations, comparing it against a Static Sink (Ssink) and the GMRE mobile relay strategy. The primary metric was the "First Node Dies" (FND) time, representing the functional lifespan of the network.
As shown in the results, the static sink configuration (Ssink) saw its first node failure at 365 seconds. In contrast, the EEDS approach maintained all nodes alive until 2040 seconds—a 5.59x improvement, aligning with the theoretical prediction of a ~6x extension. EEDS also outperformed the GMRE strategy (1380 seconds) by 48%, validating that a regulated, station-based movement is more effective than localized mobility for balancing energy consumption.
Conclusion
EEDS provides a scalable and efficient solution to the energy imbalance in WSNs. By strategically moving the sink to the data, the "relay tax" on neighbor nodes is eliminated. While best suited for low-to-moderate data rate applications, the scheme is highly extensible and can be adapted for larger geographic areas by deploying multiple coordinated mobile sinks.
Summary updated