An Embedded Wireless System For Estimating The Exposition Risk In First Emergency Management

Cesare Alippi, C. GalpertiInternational Journal on Smart Sensing and Intelligent Systems 2008 · DOI

Abstract

In this paper, we propose the design of a wearable embedded system for wirelessly delimiting a hazardous area during an emergency, alerting the rescue operators when entering in it and measuring the consequent exposition time. (The dangerous area is previously identified, e.g., through suitable instrumentation). The suggested approach, which is identically effective in indoor and outdoor environments, significantly extends existing solutions by not requiring any absolute position information for delimiting the hazardous area or fixed infrastructure as requested instead by GPS and UWB solutions. The proposed low-power system can be easily retrieved after use and ready to be deployed in a new environment.

Introduction

In the immediate aftermath of emergencies—such as chemical spills, floods, or structural collapses—knowing exactly where a team is and how long they have been exposed to a hazard is a matter of life and death. While GPS is a standard for outdoor tracking, it fails the moment a rescue team steps indoors or into a "canyon" of debris. Traditional physical markers like emergency ribbons are static and fail to provide automated data on personnel exposure.

This research presents a clever, infrastructure-less solution: a wearable embedded system that uses relative localization to "tile" hazardous areas with virtual safety belts. By focusing on proximity rather than absolute coordinates, the system provides a "deploy and forget" solution for tracking personnel exposure in any environment without requiring pre-installed grids or satellite visibility.

System Architecture

The system relies on two primary types of devices: Master units, worn by personnel, and Slave units, which are small tags dropped to mark the perimeter or center of a hazard.

Delimiting hazardous and safe areas using a network of wireless nodes to create virtual perimeters.

Communication and Logic

The technical core of the system involves several innovative components designed for reliability and low power consumption:

  • The MicroNet Protocol: A hybrid communication stack using CSMA/CA for initial discovery and TDMA (Time Division Multiple Access) for collision-free data exchange, ensuring power efficiency and timing accuracy.
  • Adaptive Radio Power Control: Instead of relying on raw signal strength (RSSI), which is notoriously unstable, the Master unit adjusts its transmission power to find the minimum link level. This control variable serves as a robust proxy for distance.
  • Fuzzy Logic Inference: To handle RF reflections in cluttered environments, a fuzzy logic subsystem processes data from multiple slaves to decide if a user is "Near," "Far," or in a "Doubt" state regarding a specific hazard zone.
The internal logic flow of the node, showing the integration of the MicroNet protocol and the fuzzy logic decision subsystem.

Experimental Validation

The authors evaluated the system through two primary real-world experiments:

  1. Indoor Localization Test: In a room with high electromagnetic interference (metallic and concrete walls), the system successfully differentiated between two distinct safety zones and identified ambiguous signal areas that could be refined via software parameters.
  2. Hospital Patient Care Campaign: A 25-day study in a rehabilitation clinic tracked over 50,000 contact events between staff and patients. This longitudinal test proved the system's low-power credentials and its ability to produce accurate "complexity estimates" based on cumulative interaction time.

Conclusion and Future Work

The core innovation of this system is the shift from absolute to relative positioning. By using radio power as a sensor and acknowledging "fuzzy" boundaries, the system becomes robust enough for real-world emergency use.

Future work will address the limitations of antenna isotropy, as the human body can currently "shadow" signals and distort perceived zones. Additionally, the researchers plan to scale the system for larger responder teams and integrate real-time environmental sensors (such as gas or radiation detectors) directly into the slave units to allow for dynamic hazard delimitation.

Summary updated

Abstract

Abstract In this paper we propose the design of a wearable embedded system 1 for wirelessly delimiting an hazardous area during emergency, alerting the rescue operators when entering in it and measuring the consequent exposition time. (The dangerous area is previously identified, e.g., through suitable instrumentation). The suggested approach, which is identically effective in indoor and outdoor environments, significantly extends existing solutions by not requiring any absolute position information for delimiting the hazardous area or fixed infrastructure as requested instead by GPS and UWB solutions. The proposed low-power system can be easily retrieved after use and ready to be deployed in a new environment.
BibTeX
@article{alippi2008embedded,
  author = {Cesare Alippi and C. Galperti},
  title = {{An Embedded Wireless System For Estimating The Exposition Risk In First Emergency Management}},
  journal = {International Journal on Smart Sensing and Intelligent Systems},
  year = {2008},
  doi = {10.21307/ijssis-2017-309},
}
Figure