An Efficient Self-Service Pre-Payment Courier System on Mobile NFC Technology

Bin Wang, Jun Guo, Dong SuInternational Journal of u- and e- Service Science and Technology 2015 · DOI

Abstract: The business and payment can be achieved not only using real money but also virtual one. With the rapid development of e-commerce, the virtual one will be more convenient for transaction. Therefore, an SSPP (Self-Service Pre-Payment) courier system is presented, which characterizes an innovative, convenient and efficient NFC (Near Field Communication) pre-payment system based on card simulation mode. The pre-payment process concerning virtual currency has been supported through a simple NFC device, which operates in RF (Radio Frequency) band. It ensures the micro-payment services of mobile to POS can be achieved. In this paper, an efficient scheme is described to check its feasibility, and some experimental results have also been given to verify that this system is candidate for the future express industry.

Introduction

The traditional courier and express industry faces significant challenges due to the explosive growth of B2C e-commerce. In China, approximately 25 million parcels are processed daily, leading to massive amounts of paperwork and manual data entry. A major bottleneck exists in the "last mile" of the shipping process: manual verification of identities and the friction of physical payments. This paper proposes a Self-Service Pre-Payment (SSPP) system that leverages mobile NFC technology in "card emulation mode" to automate identification and payment, bridging the gap between online logistics and physical drop-off.

System Architecture and Cloud-Based Security

The proposed system moves beyond traditional hardware-bound security. Typically, the Secure Element (SE) resides on the phone's UICC or an embedded chip. This research proposes a cloud-based SE architecture. By decoupling security from the physical hardware, the system enhances data protection; if a device is lost, sensitive payment data remains secure in the cloud. The mobile device acts as a gateway, utilizing the ETSI HCI (Host Controller Interface) protocol to manage communication between the host processor and the NFC controller.

Figure 1: High-level architecture of the NFC mobile system interacting with a cloud-based Secure Element (SE) database.

Hardware and Innovative Antenna Fabrication

The hardware prototype is built around the NXP PN544 NFC controller, optimized for low power consumption. A standout feature of this research is the use of additive manufacturing for RF components. Instead of traditional, chemically intensive etching, the authors employed a Dimatix Materials Printer (DMP-2831) to "direct-write" silver conductive ink onto flexible substrates. This inkjet printing process allows for precise control over track thickness and resistance, which is critical for optimizing the antenna's Q factor.

Figure 6: The inkjet printing process using a Dimatix printer and the subsequent heating/sintering of conductive particles on a substrate.

Experimental Results and Insights

The inkjet-printed 6-layer antenna prototype achieved a Q value between 4 and 8, which, while lower than long-range RFID requirements, is ideal for short-range, high-security NFC applications. The functional prototype successfully demonstrated a "write-to-tag" workflow, where URLs and user IDs were encoded and read by an Android device.

Key insights from this work include:

  • Card Emulation Dominance: By focusing on card emulation rather than just reader mode, the phone becomes a programmable smart card compatible with existing POS infrastructure.
  • Unified ID Binding: Linking a user's web-based logistics profile to their phone's NFC ID creates a seamless transition from online shopping to physical parcel shipping.
  • Sustainability: Inkjet printing significantly reduces the environmental footprint and cost of manufacturing flexible NFC terminals.

Conclusion and Future Work

The SSPP system offers a promising path toward a paperless, efficient courier industry. However, challenges remain regarding mobile payment security hardening and the capital investment required for widespread NFC reader infrastructure. Future work will focus on real-world pilot testing to evaluate system performance under high-volume stress and addressing potential cloud latency issues during transactions.

Summary updated

Abstract

The business and payment can be achieved not only using real money but also virtual one. With the rapid development of e-commerce, the virtual one will be more convenient for transaction. Therefore, an SSPP (Self-Service Pre-Payment) courier system is presented, which characterizes an innovative, convenient and efficient NFC (Near Field Communication) pre-payment system based on card simulation mode. The pre-payment process concerning virtual currency has been supported through a simple NFC device, which operates in RF (Radio Frequency) band. It ensures the micro-payment services of mobile to POS can be achieved. In this paper, an efficient scheme is described to check its feasibility, and some experimental results have also been given to verify that this system is candidate for the future express industry.
BibTeX
@article{wang2015efficient,
  author = {Bin Wang and Jun Guo and Dong Su},
  title = {{An Efficient Self-Service Pre-Payment Courier System on Mobile NFC Technology}},
  journal = {International Journal of u- and e- Service Science and Technology},
  year = {2015},
  doi = {10.14257/ijunesst.2015.8.4.11},
}
Figure