An Efficient SAR Raw Signal Simulator Accounting for Large Trajectory Deviation

Shaoqi Dai, Haiyan Zhang, Cheng Wang, Zhongwei Lin, Yi Zhang, Jinhe RanSensors 2025 · DOI

TL;DR

This paper introduces a novel Synthetic Aperture Radar (SAR) raw signal simulator that accurately models large trajectory deviations, a critical factor often overlooked by existing efficient simulators. By leveraging spatial spectrum analysis and performing a curvilinear integral in the 2D frequency domain, the method achieves high fidelity and computational efficiency, making it suitable for dynamic platforms and advanced SAR applications.

What Problem Does This Paper Address?

Synthetic Aperture Radar (SAR) raw signal simulators are crucial for developing new algorithms, verifying system designs, and planning missions. A key challenge in realistic SAR simulation is accounting for trajectory deviation, which is inevitable for airborne and unmanned aerial vehicle platforms. While existing simulators can handle small deviations, their accuracy and efficiency degrade significantly as the magnitude of trajectory deviation increases. This limitation hinders the development and testing of SAR systems operating under dynamic or non-linear flight paths. The paper aims to bridge this gap by proposing an efficient simulator that can precisely handle large trajectory deviations.

Methods

The core innovation of this work lies in its approach to modeling the SAR raw signal. Instead of relying on traditional time-domain or simplified frequency-domain methods, the authors propose a method based on spatial spectrum analysis. They discovered that the 2D spatial frequency spectrum of a SAR raw signal, at a fixed transmitted frequency, forms an arc of a circle. This key insight allows them to reformulate the calculation of the SAR transfer function from a computationally intensive double integral into a curvilinear integral in the 2D frequency domain.

The proposed method involves several steps:

  1. 2D FFT of weighted reflectivity map: The reflectivity map is weighted and then transformed using a 2D FFT.
  2. Spectrum extraction: The relevant frequency spectrum is extracted from the 2D frequency plane.
  3. Stolt interpolation: This step resamples the spectrum onto a circular arc, aligning it with the theoretical spectral shape.
  4. Antenna pattern modulation and spectrum correction: The spectrum is adjusted to account for the radar's antenna pattern and trajectory deviations.
  5. Curvilinear integral: The final transfer function is computed via a curvilinear integral.

This approach leverages the Fast Fourier Transform (FFT) for efficiency and is designed to be compatible with various SAR acquisition modes, waveforms, and radar parameters.

Datasets

Not discussed in the paper. The paper focuses on simulation and uses synthetic data generated based on defined radar parameters and scenarios.

Key Insights and Ideas

  • The "Arc" Insight: The most significant finding is that the 2D spatial frequency spectrum of a SAR raw signal, at a fixed frequency, forms an arc of a circle. This geometric property is the foundation for the proposed efficient simulation method.
  • Curvilinear Integral for Efficiency: By recognizing the arc-shaped spectrum, the complex double integral for the transfer function can be transformed into a more efficient curvilinear integral. This is a major departure from traditional methods.
  • Handling Large Deviations: The method is explicitly designed to overcome the limitations of existing simulators that fail with large trajectory deviations. The computational complexity remains largely unaffected by the magnitude of these deviations.
  • Flexibility and Generality: The simulator is shown to be applicable to various SAR modes (stripmap, spotlight, TopSAR, etc.), waveforms, and radar parameters, making it a versatile tool.

Key Results

  • Accuracy: Experimental results demonstrate that the proposed method can accurately simulate SAR raw signals with large trajectory deviations. The phase error introduced is minimal, with a mean absolute error less than 0.0231 rad and a maximum below 0.2837 rad for stripmap mode, and a maximum absolute phase error under 0.0105 rad for spotlight mode. These errors are significantly smaller than the system's resolution, ensuring negligible impact on image quality.
  • Computational Efficiency: The method is significantly more computationally efficient than time-domain simulators, especially for large scenes. Its complexity is comparable to other efficient frequency-domain methods but without the stringent constraints on deviation magnitude.
  • Image Quality: Simulations and image formation processing show that the reconstructed SAR images are well-focused, with ideal sinc-pattern sidelobes, even under substantial trajectory deviations. This validates the simulator's effectiveness for practical SAR applications.

Limitations and Future Work

  • Slant-Range Approximation: The method relies on a slant-range approximation, which introduces a residual error that must be significantly smaller than the radar's range resolution to maintain simulation validity.
  • Interferometric Phase Simulation: The current model does not simulate interferometric phase contributions arising from terrain height variations. This means it is not directly applicable to InSAR scenarios requiring phase sensitivity.
  • Future Work: The authors suggest that incorporating elevation-dependent phase terms could extend the method for interferometric SAR applications. They also highlight the method's potential for advanced scenarios like deception jamming, bistatic SAR, and circular SAR.

Summary updated

Abstract

A synthetic aperture radar (SAR) raw signal simulator is useful for supporting algorithm innovation, system scheme verification, etc. Trajectory deviation is a realistic factor that should be considered in a SAR raw signal simulator and is very important for applications such as motion composition and image formation for a SAR with nonlinear trajectory. However, existing efficient simulators become deteriorated and even invalid when the magnitude of trajectory deviation increases. Therefore, we designed an efficient SAR raw signal simulator that accounts for large trajectory deviation. Based on spatial spectrum analysis of the SAR raw signal, it is disclosed and verified that the 2D spatial frequency spectrum of the SAR raw signal is an arc of a circle at a fixed transmitted signal frequency. Based on this finding, the proposed method calculates the SAR raw signal by curvilinear integral in the 2D frequency domain. Compared with existing methods, it can precisely simulate the SAR raw signal in the case that the deviation radius is much larger. Moreover, taking advantage of the fast Fourier transform (FFT), the computational complexity of this method is much less than the time-domain ones. Furthermore, this method is applicable for multiple SAR acquisition modes and diverse waveforms and compatible with radar antenna beam width, squint angle, radar signal bandwidth, and trajectory fluctuation. Experimental results show its outstanding performance for simulating the raw signal of SAR with large trajectory deviation.
BibTeX
@inproceedings{dai2025efficient,
  author = {Shaoqi Dai and Haiyan Zhang and Cheng Wang and Zhongwei Lin and Yi Zhang and Jinhe Ran},
  title = {{An Efficient SAR Raw Signal Simulator Accounting for Large Trajectory Deviation}},
  booktitle = {Sensors},
  year = {2025},
  doi = {10.3390/s25144260},
}

Loading related content...

Figure