An efficient noble-metal-free supported copper catalyst for selective nitrocyclohexane hydrogenation to cyclohexanone oxime

Qianqian Zhang, Jing Dong, Yongmei Liu, Yong Cao, Heyong He, Yangdong WangChemical 2017 · DOI

TL;DR

Researchers have developed a novel, cost-effective copper-based catalyst that efficiently and selectively converts nitrocyclohexane (NC) into cyclohexanone oxime (CHO), a key intermediate for nylon production. This noble-metal-free catalyst overcomes limitations of existing methods, offering a more sustainable and economical route to this important chemical.

What Problem Does This Paper Address?

The production of cyclohexanone oxime (CHO) is crucial for the synthesis of nylon 6 fibers. Current industrial methods often involve multiple steps, utilize hazardous chemicals, and generate undesirable byproducts like ammonium sulfate. While direct hydrogenation of nitrocyclohexane (NC) to CHO offers a more attractive pathway, it's challenging due to competing reduction pathways that can lead to unwanted byproducts. Previous research has relied on expensive noble metal catalysts, prompting a need for more sustainable and economical alternatives. This paper addresses the need for an efficient, selective, and noble-metal-free catalyst for the direct hydrogenation of NC to CHO.

Methods

The core of this research lies in the development and characterization of a supported copper catalyst. The researchers synthesized various copper-silica (Cu/SiO2) catalysts using different preparation methods (ammonia evaporation hydrothermal, conventional precipitation-deposition, sol-gel, and incipient wet impregnation). These catalysts were then characterized using techniques like N2 adsorption-desorption isotherms, H2 temperature-programmed reduction (TPR), Transmission Electron Microscopy (TEM), High-Resolution TEM (HRTEM), and X-ray Photoelectron Spectroscopy (XPS) to understand their structural and chemical properties. The catalytic performance was evaluated through the hydrogenation of nitrocyclohexane under specific reaction conditions (temperature, pressure, solvent, and catalyst loading).

Datasets

Not discussed in the paper. The study focuses on experimental synthesis and catalytic testing rather than machine learning or data-driven approaches.

Key Insights and Ideas

  • Noble-Metal-Free Success: The most significant insight is the demonstration that a simple, non-noble copper catalyst supported on silica can achieve high activity and selectivity for a reaction previously dominated by precious metals.
  • Synergistic Cu⁰ and Cu⁺ Interaction: The catalyst's effectiveness stems from the cooperative interaction between metallic copper (Cu⁰) and partially oxidized copper (Cu⁺) species. This dual-state copper is crucial for both activating hydrogen and polarizing the nitro group.
  • Role of Weakly Acidic SiO₂ Support: The silica support is not merely an inert carrier. Its weakly acidic nature plays a critical role in enhancing selectivity by preventing the hydrolysis of the desired cyclohexanone oxime product into cyclohexanone.
  • Optimized Catalyst Design: The study highlights that not just the presence of copper, but also its dispersion, oxidation state, and the support's properties are critical for optimal performance. The 15Cu/SiO2-AE catalyst, prepared via the ammonia evaporation hydrothermal method, emerged as the superior performer.
  • Cost-Effectiveness and Sustainability: This noble-metal-free approach offers a clear path towards more sustainable and economically viable production of CHO, reducing reliance on expensive and scarce precious metals.

Key Results

  • The developed 15Cu/SiO2-AE catalyst achieved an excellent yield of 92% for cyclohexanone oxime (CHO) from nitrocyclohexane (NC) with full NC conversion within 4 hours under mild conditions (1 MPa H₂, 100 °C).
  • The catalyst demonstrated high selectivity, with only minor amounts of cyclohexylamine and cyclohexanone observed as byproducts.
  • The catalyst proved to be reusable for at least three cycles without significant loss of activity, and no copper leaching was detected.
  • Optimizing Cu loading was crucial, with 15 wt% Cu showing the best performance.
  • Comparison with other supports (ZrO₂, Al₂O₃, CeO₂) and other non-noble metals (Ni, Fe, Co) clearly favored the Cu/SiO₂ system.

Limitations and Future Work

  • Reaction Conditions: While the catalyst performs well under the tested mild conditions, further exploration of a wider range of reaction parameters (e.g., different solvents, pressures, and temperatures) could potentially further optimize performance or broaden applicability.
  • Catalyst Deactivation: Although the catalyst showed good reusability for three cycles, long-term stability and potential deactivation mechanisms under more demanding industrial conditions would warrant further investigation.
  • Mechanism Elucidation: While a proposed mechanism involving synergistic Cu⁰/Cu⁺ interaction is presented, more in-depth mechanistic studies (e.g., in-situ spectroscopy) could provide finer details on the reaction pathway and intermediate species.
  • Scale-Up: The study was conducted on a laboratory scale. Investigating the scalability of the catalyst synthesis and its performance in larger reactors would be a crucial next step for industrial implementation.

Summary updated

Abstract

It was shown for the first time that cyclohexanone oxime (CHO) can be selectively produced by heterogeneous copper-catalyzed hydrogenative transformation of nitrocyclohexane (NC). The combination of Cu<sup>0</sup> and Cu<sup>+</sup> and their cooperative interaction with weakly acidic SiO<sub>2</sub> supports elicited a significantly unique and selective catalysis in the hydrogenation of NC to CHO.
BibTeX
@inproceedings{zhang2017efficient,
  author = {Qianqian Zhang and Jing Dong and Yongmei Liu and Yong Cao and Heyong He and Yangdong Wang},
  title = {{An efficient noble-metal-free supported copper catalyst for selective nitrocyclohexane hydrogenation to cyclohexanone oxime}},
  booktitle = {Chemical},
  year = {2017},
  doi = {10.1039/c6cc10267k},
}
Figure