Abstract
An Energy-Harvesting Wireless Sensor Network (EH-WSN) depends on harvesting energy from the environment to prolong network lifetime. Subjected to limited energy in complex environments, an EH-WSN encounters difficulty when applied to real environments as the network efficiency is reduced. Existing EH-WSN studies are usually conducted in assumed conditions in which nodes are synchronized and the energy profile is knowable or calculable. In real environments, nodes may lose their synchronization due to lack of energy. Furthermore, energy harvesting is significantly affected by multiple factors, whereas the ideal hypothesis is difficult to achieve in reality. In this paper, we introduce a general Intermittent Energy-Aware (IEA) EH-WSN platform. For the first time, we adopted a double-stage capacitor structure to ensure node synchronization in situations without energy harvesting, and we used an integrator to achieve ultra-low power measurement. With regard to hardware and software, we provided an optimized energy management mechanism for intermittent functioning. This paper describes the overall design of the IEA platform, and elaborates the energy management mechanism from the aspects of energy management, energy measurement, and energy prediction. In addition, we achieved node synchronization in different time and energy environments, measured the energy in reality, and proposed the light weight energy calculation method based on measured solar energy. In real environments, experiments are performed to verify the high performance of IEA in terms of validity and reliability. The IEA platform is shown to have ultra-low power consumption and high accuracy for energy measurement and prediction.
Introduction
Wireless Sensor Networks (WSNs) are frequently deployed in remote or inaccessible locations where battery replacement is impossible. While Energy Harvesting (EH) from solar or wind sources is a logical solution, it introduces a "death and rebirth" cycle: nodes often run out of power and shut down. Most existing research assumes nodes stay synchronized or have predictable energy profiles. In reality, when a node loses power, it loses its sense of time (synchronization), leading to network paralysis. Furthermore, calculating available energy is difficult because capacitor performance varies with environmental conditions, and digital sampling of power consumption is itself an energy-intensive task.
The IEA Platform Architecture
The Intermittent Energy-Aware (IEA) platform introduces a robust energy management mechanism designed for these challenges. A key innovation is the double-stage capacitor structure. Instead of a single large storage unit, the system uses two: a small electrolytic capacitor ($C_1$) for rapid wake-up and a larger supercapacitor ($C_2$) dedicated to keeping the Real-Time Clock (RTC) running. This ensures the node maintains network synchronization even during "dark" periods without energy harvesting.
Ultra-Low Power Energy Measurement
To overcome the energy cost of monitoring power consumption, the IEA platform utilizes an analog integrator. Rather than using the MCU to constantly sample current, a high-side current sense amplifier paired with an analog integrator accumulates charge data in hardware. This allows the MCU to wake up briefly, read a single value, and calculate energy with high precision while minimizing its duty cycle.
The platform also implements a lightweight prediction model using an Exponentially Weighted Moving-Average (EWMA) algorithm. By measuring real-time solar panel voltage and internal resistance, the system can predict future energy availability more accurately than idealized mathematical models.
Key Results
The IEA platform was prototyped using standard components, including an MSP430FR6972 MCU and an SX1211 RF chip. Experimental evaluations demonstrated:
- Ultra-Low Power: Quiescent current is less than 0.5 µA when powered down and under 2 µA when active. The total energy cost for the measurement circuit is only 157 µW.
- High Accuracy: The platform achieved an average energy measurement accuracy of 99.89% and a solar prediction error of only 0.74%.
- Network Stability: In 24-hour tests, the system maintained a 98.3% transmission success rate, successfully re-synchronizing even after long periods without harvesting.
Conclusion and Future Work
The IEA platform provides a viable path for deploying reliable EH-WSNs in complex, real-world environments. By offloading synchronization and measurement tasks to specialized hardware structures, the system achieves high efficiency and accuracy. Future research will explore adapting these mechanisms for erratic energy sources like vibration and scaling the architecture for multi-hop network topologies.
Summary updated