An Automation System for Controlling Streetlights and Monitoring Objects Using Arduino

Zain Mumtaz, Saleem Ullah, Zeeshan Ilyas, Naila Aslam, Shahid Iqbal, Shuo Liu, Jehangir Arshad Meo, Hamza Ahmad Madni2018 · DOI

TL;DR

This paper presents an Arduino-based system for intelligent street lighting that conserves energy by dynamically adjusting light intensity based on ambient light and object detection. It introduces two modes: one that dims lights at night and brightens them upon detecting motion, and a second that only activates lights when motion is detected, further optimizing energy use. The system also incorporates an automatic door and an object counter, demonstrating a versatile, low-cost solution for smart city and home automation.

What Problem Does This Paper Address?

Traditional street lighting systems operate on a simple on/off schedule, leading to significant energy wastage. Streetlights are often left at full brightness throughout the night, even when there are no vehicles or pedestrians, reducing their lifespan and incurring unnecessary electricity costs. Existing automation attempts have limitations, such as relying on timers or simple light sensors without considering actual need, or having limited wireless range for practical implementation. This paper aims to address the need for a more intelligent, energy-efficient, and cost-effective street lighting system that responds to real-time environmental conditions and human presence.

Methods

The core of the proposed system is built around the Arduino Uno microcontroller. The system utilizes:

  • Light Dependent Resistor (LDR): To sense ambient light levels and determine day/night conditions.
  • Infrared (IR) Obstacle Avoidance Sensors: To detect the presence of objects (vehicles, pedestrians) on the road.
  • Light Emitting Diodes (LEDs): To act as the streetlights.
  • L298 Motor Module: For controlling an automatic door mechanism.

The system operates in two main modes:

  1. Night-time DIM and Object Detection: During the day, lights are OFF. At night, lights are dimmed to a low brightness. When an object is detected by an IR sensor, the corresponding section of streetlights turns to full brightness (HIGH). As the object moves, the system dynamically adjusts which lights are HIGH and which are DIM, creating a "moving spotlight" effect.
  2. Object Detection Only: This mode further optimizes energy saving by ensuring streetlights remain completely OFF at night if no object is detected. They only turn ON to full brightness when an object is sensed.

Additionally, the system incorporates:

  • Automatic Door System: An IR sensor and a DC motor controlled by the L298 module open a door when an object is detected and close it when the object is no longer present.
  • Object Counter: The Arduino counts the number of objects detected by the IR sensors and displays this count on a serial monitor, providing traffic flow data.

The system was designed and validated using lab-scale prototypes.

Datasets

Not discussed in the paper. The system relies on real-time sensor inputs rather than pre-existing datasets for training or evaluation.

Key Insights and Ideas

  • Dynamic DIMMING for Energy Savings: The concept of dimming streetlights at night when full illumination isn't strictly necessary is a key energy-saving strategy. This is more efficient than simply turning lights on and off.
  • Motion-Triggered Full Brightness: Activating full brightness only when an object is detected ensures that energy is used precisely when and where it's needed, further enhancing efficiency and safety.
  • Modular and Scalable Design: The use of readily available, low-cost components like Arduino and IR sensors makes the system accessible and adaptable for various applications.
  • Integrated Safety and Monitoring: Combining street lighting control with an automatic door and an object counter provides a multi-functional solution for smart environments.
  • Lab-Scale Validation: Demonstrating the concept with a lab-scale prototype is crucial for proving feasibility before large-scale implementation.

Key Results

The paper demonstrates the successful implementation of the proposed automation system through lab-scale prototypes.

  • Daytime Operation: Streetlights remain OFF.
  • Night-time (No Object): Streetlights are in a DIM state (half brightness).
  • Night-time (Object Detected): Streetlights transition to HIGH brightness upon object detection, with specific sections illuminating as objects pass.
  • Object Detection Only Mode: Streetlights remain OFF at night unless an object is detected, then turn ON.
  • Automatic Door: The door successfully opens and closes based on IR sensor detection.
  • Object Counting: The serial monitor accurately displays the number of objects detected.

The authors emphasize the system's efficiency, reliability, and low cost, suggesting its suitability for large-scale implementation.

Limitations and Future Work

  • Wireless Connectivity: The current implementation does not include wireless connectivity. The authors acknowledge that integrating wireless capabilities (e.g., Ethernet, BLE) would enhance scalability, allow for remote control, and facilitate integration with cloud platforms for data management and user-friendly interfaces.
  • Sensor Replacement: The authors suggest that the IR sensors could be replaced with other sensor types (e.g., ultrasonic, long-range IR, laser diodes) or combinations thereof to improve performance or adapt to specific environmental needs.
  • Large-Scale Implementation: While the lab-scale prototype validates the concept, the authors note that further work is needed to adapt the managed power for real-scale facilities, potentially by using external voltage controllers or other technologies like BLE.
  • Environmental Robustness: The paper doesn't extensively discuss the system's performance under adverse weather conditions, which would be a critical consideration for real-world deployment.

Summary updated

BibTeX
@misc{mumtaz2018automation,
  author = {Zain Mumtaz and Saleem Ullah and Zeeshan Ilyas and Naila Aslam and Shahid Iqbal and Shuo Liu and Jehangir Arshad Meo and Hamza Ahmad Madni},
  title = {{An Automation System for Controlling Streetlights and Monitoring Objects Using Arduino}},
  year = {2018},
  doi = {10.3390/s18103178},
}
Figure