An Approach for Estimating the Cogging Torque Performance Considering Manufacturing Uncertainties for the IPM Machine

Yongxi Yang, William Cai, Xin Jin, Shuo Zhang, Chengning Zhang, Rui Li, Yue ZhaoIEEE Access 2023 · DOI

Abstract

The design tolerances and material defects are frequently inevitable in the real manufacturing process, where unexpected additional cogging torque might be caused as a result. An approach fast estimating the design performances under manufacturing uncertainties is highly expected. In this paper, the previously proposed worst-uncertain-combination-analysis (WUCA) approach is further modified, where the influences of rotor geometries could be taken into account. A 10-pole-12-slot (10P12S) permanent magnet (PM) machine with non-uniform air-gap considering the rotor uncertainties is taken as an example. The cogging torque robustness for designs with different air-gap saliency ratios are discussed and compared. A medium value of air-gap saliency is suggested to achieve a balance between the ideal and worst-scenario performance under rotor uncertainties. Three prototypes with different air-gap saliency ratios are manufactured, where the possibly worst-case under uncertainties are imitated with a special PM assembling sequence. The deduction is then verified by the experimental results of the prototypes.
BibTeX
@inproceedings{yang2023approach,
  author = {Yongxi Yang and William Cai and Xin Jin and Shuo Zhang and Chengning Zhang and Rui Li and Yue Zhao},
  title = {{An Approach for Estimating the Cogging Torque Performance Considering Manufacturing Uncertainties for the IPM Machine}},
  booktitle = {IEEE Access},
  year = {2023},
  doi = {10.1109/access.2023.3319951},
}

Loading related content...

Figure