An Anti-collision Early Warning and Detection System for Vehicle Visual Blind Area and Its Control Method

Yingjun Sang, Kang Peng, Xianyan Chen, Udu Chukwudi Emeka, Zhijie Ding, Heng Zhang, Yuanyuan Fan, Fan Qi, Jing Dejiang, Zhang Junqiang, He Xiaokai, J Mar, H Lin, L Canzian, U Demiryurek, M Schaar, Y Lu, C Han, M Lu, Fan Kc, Ming Liu, Servia-Rodr Guez, K Rachuri, C Mascolo, T Okoshi, K Tsubouchi, M TajiInternational Journal of Social Sciences and Economic Management 2022 · DOI

Abstract

This paper designs a collision prevention warning detection system and proposes a control method based on this system. The system and its control method have the paired photoelectric signal transmitting unit and the photoelectric signal receiving unit around the vehicle to detect and prevent the collision in the driver's visual blind area. The system and its control method can realize the real-time voice alarm inside and outside the vehicle, so as to improve the driving safety and reduce the crash accident during the vehicle driving.

Introduction

Large transport vehicles, such as heavy trucks, suffer from significant visual blind areas, particularly during right-hand turns. Because of the vehicle's length and height, drivers often cannot see pedestrians or low-lying obstacles near the wheels. While modern automotive safety often focuses on high-speed highway assistance, low-speed urban maneuvering remains a high-risk scenario for vulnerable road users. This paper addresses this gap by designing a dedicated, low-latency monitoring system that functions even when the driver is distracted or the obstacle is too low for traditional mirrors or cameras to capture effectively.

System Architecture and Methodology

The proposed system utilizes a dual-layered hardware solution to eliminate vehicle blind spots using a combination of photoelectric "light curtains" and piezoelectric touch sensors. The core of the system is an STC89C52RC microprocessor which manages two distinct sensing schemes:

  1. Photoelectric Proximity Sensing: Pairs of radiation correlation sensors (transmitting and receiving units) are installed around the vehicle's periphery. These create an invisible "light curtain." If an obstacle or pedestrian interrupts the beam, the system generates an inductive interrupt signal.
  2. Tactile Collision Sensing: A "full-size touch sensor" made of piezoelectric coaxial cable is mounted along the lower edge of the vehicle box. This provides a secondary fail-safe; if a physical collision occurs, the pressure signal is immediately fed back to the microprocessor.
Figure 1: Placement of photoelectric signal units and full-size touch sensors on a transport vehicle.

The control logic is designed for high reliability and low latency. As shown in the flowchart below, the system continuously polls both sensor arrays simultaneously upon startup.

Figure 4: Control flow logic for the anti-collision system.

If either the light beam is broken or the pressure sensor is triggered, the MCU activates an N2010H voice alarm module. Crucially, the system broadcasts alerts both inside the cockpit (to alert the driver) and outside the vehicle (to warn the pedestrian).

Key Insights

  • Redundancy through Multi-modality: By combining photoelectric (non-contact) and piezoelectric (contact) sensors, the system ensures that even if environmental factors (like heavy dust or fog) interfere with the optical sensors, the physical touch sensor remains an active line of defense.
  • Bidirectional Warning: Most safety systems only alert the driver. This design emphasizes a bidirectional voice alarm, recognizing that the pedestrian is often in a better position to react quickly if they realize they are in danger.
  • Hardware-Level Simplicity: Unlike computer-vision-based systems that require heavy computational resources, this system relies on basic interrupt logic and high/low-level signal detection. This makes it potentially more robust and easier to retrofit onto older fleet vehicles.

Results and Discussion

The research delivers a functional system design and schematic. Key results include:

  • Successful Integration: The authors successfully mapped the connection principles between the MCU, the dual-D trigger (74LS74) for the alarm module, and the sensor arrays.
  • Logic Verification: The control flow demonstrates a clear decision-making process where the system continuously polls for light interruption and pressure signals as soon as the vehicle starts.
  • Real-time Performance: The system realizes "real-time voice alarm" capabilities, which is critical for preventing accidents in the seconds-long window of a vehicle turn.

Limitations and Future Work

While the design is foundational, several engineering challenges remain:

  • Environmental Robustness: Future work must address how photoelectric sensors handle "noise" such as rain, snow, or road debris.
  • Empirical Validation: Quantitative data regarding detection range and sensitivity in real-world traffic conditions is needed.
  • Active Intervention: Future iterations could explore integrating the interrupt signal directly with the vehicle's braking system for automated emergency braking (AEB) in blind spots.
  • Durability: The piezoelectric cable's placement on the lower edge of the vehicle makes it prone to wear and mud, requiring further study on long-term durability.

Summary updated

Abstract

This paper designs a collision prevention warning detection system and proposes a control method based on this system.The system and its control method have the paired photoelectric signal transmitting unit and the photoelectric signal receiving unit around the vehicle to detect and prevent the collision in the the driver's visual blind area.The system and its control method can realize the real-time voice alarm inside and outside the vehicle, so as to improve the driving safety and reduce the crash accident during the vehicle driving.
BibTeX
@article{sang2022anti,
  author = {Yingjun Sang and Kang Peng and Xianyan Chen and Udu Chukwudi Emeka and Zhijie Ding and Heng Zhang and Yuanyuan Fan and Fan Qi and Jing Dejiang and Zhang Junqiang and He Xiaokai and J Mar and H Lin and L Canzian and U Demiryurek and M Schaar and Y Lu and C Han and M Lu and Fan Kc and Ming Liu and Servia-Rodr Guez and K Rachuri and C Mascolo and T Okoshi and K Tsubouchi and M Taji},
  title = {{An Anti-collision Early Warning and Detection System for Vehicle Visual Blind Area and Its Control Method}},
  journal = {International Journal of Social Sciences and Economic Management},
  year = {2022},
  doi = {10.38007/ijssem.2022.030304},
}
Figure