TL;DR
This study uses an animal tissue model to objectively measure the forces required to dislodge tracheostomy tubes secured with different techniques. The findings reveal that suture-based methods, particularly those placed medially, offer significantly greater resistance to displacement than standard tube holder straps, with lateral forces being the easiest to overcome.
What Problem Does This Paper Address?
Unintentional decannulation of a tracheostomy tube is a serious, potentially life-threatening complication. While various methods exist for securing these tubes, ranging from simple neck straps to different suturing techniques, there's a lack of objective, empirical data on how effectively these methods resist displacement forces. Clinicians often rely on anecdotal evidence or limited studies, making it difficult to definitively choose the most secure method. This paper aims to fill that gap by providing quantitative data on the forces required to dislodge a tracheostomy tube under different securing techniques and directional stresses, using a realistic animal tissue model.
Methods
The researchers created simulated tracheostomy stomas on fresh sheep neck specimens, chosen for their anatomical similarity to human tissue. A standard tracheostomy tube was inserted into each stoma and secured using five different methods:
- Tracheostomy ties only (strap)
- Tracheostomy ties with medial sutures
- Tracheostomy ties with lateral sutures through the flange's tie holes
- Tracheostomy ties with lateral interrupted sutures through the flange plastic
- Tracheostomy ties with lateral continuous sutures through the flange plastic
For each suturing method, four sutures were applied (two superior, two inferior). Tension tests were then conducted using digital luggage scales to measure the force required to displace the tube. These tests were performed in three directions: lateral, perpendicular, and oblique. Each securing technique was tested six times on different sheep necks. Statistical analysis was performed using SPSS.
Datasets
Not discussed in the paper. The study utilized fresh sheep neck specimens as the experimental model.
Key Insights and Ideas
- Sutures are superior to straps: The most fundamental takeaway is that any form of suture securing provides significantly more resistance to displacement than a tracheostomy tube holder strap alone. This is crucial for understanding basic security principles.
- Medial is more secure than lateral: When using sutures, placing them medially offers greater resistance to displacement compared to lateral placement. This suggests that anchoring the tube closer to the midline provides a more robust hold.
- Direction matters: The direction of force is a critical factor. Oblique forces require the most significant displacement force, while lateral forces require the least. This implies that certain patient movements or external forces are more likely to cause decannulation depending on their direction.
- Continuous sutures offer an edge: Among the lateral suture techniques, continuous sutures showed a statistically significant advantage over interrupted sutures in resisting displacement.
Key Results
- Directional Forces: Displacement forces were highest in the oblique direction and lowest in the lateral direction, with perpendicular forces falling in between. This difference was statistically significant (p=0.009).
- Securing Methods: All suture methods required significantly higher displacement forces than the strap alone.
- Medial vs. Lateral Sutures: Medial suture placement was statistically superior to flange and interrupted lateral methods in terms of displacement resistance.
- Continuous vs. Interrupted: Continuous lateral sutures showed greater resistance than interrupted lateral sutures, though the difference was not always statistically significant across all comparisons.
Limitations and Future Work
The authors acknowledge several limitations:
- Acceleration and Torque: The study could not account for the influence of acceleration and torque forces, which might be relevant in real-world scenarios.
- Cuff Pressure: Standardizing balloon cuff pressure was not possible, so all experiments were conducted with uninflated cuffs. This could affect how the tube sits and is displaced.
- Species Differences: The use of animal tissue means that direct translation to human physiology may be limited due to differences in anatomy, metabolism, and other factors.
- Clinical Realism: The forces measured in the lab were not directly extrapolated to a typical clinical environment, which involves variations in skin elasticity, friction, and moisture.
Future work suggested includes:
- In Situ Testing: Performing tests in a more realistic clinical setting to assess the actual forces encountered by patients and clinicians.
- Reproducibility and Reliability: Further studies to confirm the reproducibility and reliability of these findings, potentially with larger sample sizes or different animal models.
- Contribution of Other Factors: Investigating the impact of factors like tube length, subcutaneous tissue thickness, and positive end-expiratory pressure on tube placement and security.
Summary updated