An Aluminum Microfluidic Chip Fabrication Using a Convenient Micromilling Process for Fluorescent Poly(DL-lactide-co-glycolide) Microparticle Generation

Yung‐Sheng Lin, Chih-Hui Yang, Chih-Yu Wang, Fang‐Rong Chang, Keng‐Shiang Huang, Wan-Chen HsiehSensors 2012 · DOI

TL;DR

This paper introduces a novel, robust aluminum microfluidic chip fabricated using a cost-effective CNC micromilling process. This platform is demonstrated to efficiently produce uniform, fluorescent PLGA microparticles loaded with quantum dots, offering a promising tool for biomedical applications and drug delivery.

What Problem Does This Paper Address?

The creation of precisely sized and uniformly distributed microparticles is crucial for various applications, particularly in pharmaceuticals and biomedical diagnostics. Traditional microfluidic chip fabrication methods, such as lithography, often involve complex, multi-step processes, aggressive chemicals, and require cleanroom environments, making them expensive and time-consuming. While polymer-based microfluidic chips are more accessible, they often suffer from poor chemical resistance to organic solvents, limiting their use in certain applications. This paper addresses the need for a more robust, easily fabricated, and chemically resistant microfluidic platform capable of producing high-quality microparticles, specifically for encapsulating quantum dots within PLGA for potential labeling and diagnostic uses.

Methods

The core innovation lies in the fabrication of the microfluidic chip itself. Instead of traditional photolithography or soft lithography, the researchers employed a Computer Numerical Control (CNC)-based mechanical micromachining process, specifically micro-milling, to create the microchannels directly on an aluminum substrate. This direct-write approach offers several advantages:

  • Material Choice: Aluminum provides excellent mechanical properties, durability, reusability, and importantly, high chemical resistance to organic solvents like dichloromethane, which is often used in microparticle formation.
  • Fabrication Process: CNC micromilling is described as a convenient, accessible, and rapid prototyping method. The process involved using a 4-axis machine tool with high-speed micro-milling cutters to create channels with a depth of 5 µm per pass, programmed for multiple passes to achieve a total depth of 50 µm.
  • Chip Design: The microfluidic chip is constructed in a three-layer assembly: an epoxy resin cover layer, a glass window, and an aluminum base layer. These layers are integrated using screws, and the precise surfacing of the glass and aluminum ensures a leak-proof design.
  • Microparticle Generation: The chip utilizes a flow-focusing design within a cross-junction to create oil-in-water (o/w) emulsification. This system precisely controls the shear force exerted by the continuous water phase on the dispersed oil phase (containing PLGA and quantum dots), leading to the formation of uniformly sized droplets. The size of these droplets, and subsequently the microparticles, can be tuned by adjusting the flow rates of the water and oil phases.

Datasets

Not discussed in the paper. The study focuses on the fabrication of a microfluidic device and the generation of microparticles, rather than training or evaluating on pre-existing datasets.

Key Insights and Ideas

  • Aluminum as a Microfluidic Substrate: The paper highlights aluminum as a viable and advantageous material for microfluidic chips, particularly for applications involving organic solvents or harsh conditions, overcoming limitations of traditional polymer-based platforms.
  • CNC Micromilling for Accessibility: The use of conventional CNC micromilling for microfluidic chip fabrication democratizes the process, making it more accessible and cost-effective compared to high-tech cleanroom methods.
  • Flow-Focusing for Precise Control: The study effectively demonstrates how a well-established flow-focusing microfluidic strategy can be leveraged to achieve highly controlled and monodisperse microparticle generation, even with a metal-based chip.
  • Tunable Microparticle Size: The ability to precisely control microparticle size by simply adjusting flow rates is a significant advantage for tailoring particles for specific applications.
  • Quantum Dot Encapsulation: The successful encapsulation of CdSe/ZnS quantum dots within PLGA microparticles showcases the platform's potential for creating functionalized microcarriers for imaging and diagnostics.

Key Results

  • Microparticle Generation: The study successfully generated fluorescent PLGA microparticles loaded with CdSe/ZnS quantum dots.
  • Droplet and Microparticle Size: The average diameter of the PLGA droplets formed was 520 µm, which upon solvent evaporation, shrunk to an average microparticle diameter of 42.8 µm ± 2.3 µm, representing a significant shrinkage of 91.8%.
  • Size Uniformity: The relative standard deviation (RSD) for droplet and microparticle sizes was consistently low (e.g., droplet RSD as low as 1.2%, microparticle RSD as low as 2.9% in some conditions), indicating good uniformity.
  • QD Encapsulation Efficiency: The overall encapsulation of QDs was 8.1% (weight percent) of the PLGA microparticles.
  • QD Spectral Characteristics: The study observed a slight red-shift in the extinction spectrum of the QDs after encapsulation, indicating that their optical properties were largely preserved.

Limitations and Future Work

  • Miniaturization Limit: The authors acknowledge that the current mechanical micromachining technology has limitations in performing miniaturization work smaller than 50 micrometers in channel size. This also limits the size of microparticles that can be produced.
  • Roughness Impact: While the surface roughness of the aluminum channels (Sq = 2.14 µm) is acceptable, it is noted that it can cause some disturbance to the flow streams, potentially affecting droplet distribution at very small sizes.
  • Future Applications: The paper suggests that this approach has broad potential for various applications in the pharmaceutical and biomedical fields, including micro-mixers, micro-reactors, and the generation of various polymer beads for oral usage or as vehicles for drug/enzyme controlled release. Further exploration into these applications is a natural next step.

Summary updated

Abstract

This study presents the development of a robust aluminum-based microfluidic chip fabricated by conventional mechanical micromachining (computer numerical control-based micro-milling process). It applied the aluminum-based microfluidic chip to form poly(lactic-co-glycolic acid) (PLGA) microparticles encapsulating CdSe/ZnS quantum dots (QDs). A cross-flow design and flow-focusing system were employed to control the oil-in-water (o/w) emulsification to ensure the generation of uniformly-sized droplets. The size of the droplets could be tuned by adjusting the flow rates of the water and oil phases. The proposed microfluidic platform is easy to fabricate, set up, organize as well as program, and is valuable for further applications under harsh reaction conditions (high temperature and/or strong organic solvent systems). The proposed method has the advantages of actively controlling the droplet diameter, with a narrow size distribution, good sphericity, as well as being a simple process with a high throughput. In addition to the fluorescent PLGA microparticles in this study, this approach can also be applied to many applications in the pharmaceutical and biomedical area.
BibTeX
@inproceedings{lin2012aluminum,
  author = {Yung‐Sheng Lin and Chih-Hui Yang and Chih-Yu Wang and Fang‐Rong Chang and Keng‐Shiang Huang and Wan-Chen Hsieh},
  title = {{An Aluminum Microfluidic Chip Fabrication Using a Convenient Micromilling Process for Fluorescent Poly(DL-lactide-co-glycolide) Microparticle Generation}},
  booktitle = {Sensors},
  year = {2012},
  doi = {10.3390/s120201455},
}
Figure