Ambient OFDM Pilot-Aided Backscatter Communications: Concept and Design

Takanori Hara, Ryuhei Takahashi, Koji IshibashiIEEE Access 2021 · DOI

Abstract

This paper investigates a backscatter communications system that exploits ambient pilot symbols in existing OFDM standards, such as IEEE 802.11 (Wi-Fi), to enable ultra-low-power communication with enhanced range and data rates. By utilizing known reference signals, the system overcomes the significant interference typically encountered in ambient backscatter systems. We explore two modulation schemes—Phase-Shift Keying (PSK) and the novel Delay-Shift Keying (DSK)—and propose a low-complexity pilot-aided Maximum-Likelihood (ML) detector.

Introduction

The Internet of Things (IoT) requires sustainable, low-power connectivity for billions of sensors. Ambient Backscatter Communication (AmBC) is a promising paradigm where devices transmit data by reflecting existing ambient signals. However, traditional AmBC faces a major challenge: the receiver must detect a weak reflected signal amidst strong direct-link interference from the ambient source. This paper proposes leveraging the deterministic pilot symbols in OFDM signals to simplify detection and improve performance.

System Architecture

The system comprises an ambient transmitter (ATx), a backscatter transmitter (BTx), and a backscatter receiver (BRx). The BTx modulates its data by adjusting its antenna impedance, reflecting the ATx's signal to the BRx.

System model of the proposed ambient backscatter communication system showing the ATx, BTx, and BRx nodes.

The core advantage of this architecture is the use of pilot-aided detection. Since pilot symbols are known at the BRx, they serve as a reference to estimate channel conditions and cancel direct-link interference, significantly easing the task of decoding the backscattered data.

Modulation Schemes

Two modulation techniques are analyzed for the backscatter transmitter:

  1. Phase-Shift Keying (PSK): The BTx switches between different load impedances to alter the phase of the reflected signal.
  2. Delay-Shift Keying (DSK): A novel approach where the BTx uses analog delay lines (e.g., SAW or BAW filters) to introduce specific propagation delays. These delays manifest as frequency-domain phase rotations across OFDM subcarriers.
Structure of the PSK-based backscatter modulator using a switching circuit and multiple loads.

Simulation results indicate that PSK is optimal for low bandwidth efficiencies (under 3 bits per channel use), while DSK excels at higher efficiencies (above 2 bpcu). For DSK to work optimally, the delay difference between symbols must exceed the total channel delay spread.

Detection and Protocol

A simplified ML detector is developed to reduce computational overhead. By focusing only on the backscattered symbol alphabet rather than the joint ambient-backscatter alphabet, the search space is reduced from exponential to linear. A three-phase protocol ensures practical implementation:

  • Direct Link Estimation: Measuring the path from the ambient source to the receiver.
  • Backscatter Link Estimation: Measuring the path through the reflecting device.
  • Data Transmission: The actual communication phase where backscattered data is decoded.

Conclusion

The proposed pilot-aided AmBC system achieves performance comparable to complex joint ML detectors with significantly lower complexity. By exploiting existing wireless infrastructure, this approach provides a scalable and efficient solution for high-speed, ultra-low-power IoT communications in realistic, cluttered wireless environments.

Summary updated

BibTeX
@article{hara2021ambient,
  author = {Takanori Hara and Ryuhei Takahashi and Koji Ishibashi},
  title = {{Ambient OFDM Pilot-Aided Backscatter Communications: Concept and Design}},
  journal = {IEEE Access},
  year = {2021},
  doi = {10.1109/access.2021.3091183},
}
Figure