Altermagnetic Flatband‐Driven Fermi Surface Geometry for Giant Tunneling Magnetoresistance

Xingyue Yang, Shibo Fang, Yang Zhang, Pin Ho, Jiangbo Lu, Yee Sin AngAdvanced 2026 · DOI

TL;DR

This paper demonstrates how the unique "flatband" electronic structure in certain altermagnetic materials, specifically KV₂Se₂O, can lead to exceptionally high tunneling magnetoresistance (TMR) ratios in magnetic tunnel junctions (MTJs). By engineering the Fermi surface geometry, they achieve TMR values exceeding 10⁵%, paving the way for next-generation spintronic devices.

What Problem Does This Paper Address?

Traditional magnetic random-access memory (MRAM) relies on magnetic tunnel junctions (MTJs) made from ferromagnetic (FM) materials. While effective, FM materials are susceptible to stray magnetic fields, limiting device density and stability. Antiferromagnetic (AFM) materials offer stability but lack sufficient spin polarization for efficient spintronic applications. Altermagnetism emerges as a promising middle ground, combining AFM-like stability with FM-like spin-split electronic structures.

The core challenge in altermagnetic tunnel junctions (AMTJs) is achieving a significant tunneling magnetoresistance (TMR) effect. TMR arises from the difference in electrical resistance when the magnetic alignment of the electrodes is parallel versus antiparallel. For AMTJs, this relies on the mismatch between spin-polarized conduction channels in momentum space. However, finding bulk altermagnets with perfectly non-overlapping spin-polarized Fermi surfaces (which would ideally lead to zero antiparallel current) is difficult. This paper investigates how the geometry of these Fermi surfaces, particularly the presence of "flatbands," can minimize this overlap and boost TMR.

Methods

The researchers employed a combination of theoretical and computational methods:

  • First-principles quantum transport simulations: Using Density Functional Theory (DFT) and the nonequilibrium Green's function (NEGF) formalism, they calculated the electronic band structures and spin-resolved transmission coefficients for various altermagnetic materials.
  • VASP and QuantumATK packages: These established computational tools were used for geometry optimization, electronic structure calculations, and quantum transport simulations.
  • Modeling of MTJ devices: They simulated MTJs with different altermagnetic electrodes (V₂Te₂O, RbV₂Te₂O, and KV₂Se₂O) and various insulating barriers (vacuum, PbO, TiOF₂).
  • Analysis of Fermi Surface Geometry: A key focus was on analyzing the shape and overlap of spin-polarized Fermi surfaces, particularly the role of "flatbands" in confining spin degeneracy to specific regions.

Datasets

Not discussed in the paper. The study relies on ab initio calculations rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Flatbands are crucial for high TMR: The presence of "flatbands" near the Fermi level in altermagnetic materials like RbV₂Te₂O and KV₂Se₂O is identified as the key to minimizing spin-channel overlap. These flatbands lead to quasi-2D Fermi surface sheets that confine spin degeneracy to very small, arc-like or nodal-like regions.
  • KV₂Se₂O as a prime candidate: KV₂Se₂O stands out due to its Fermi surface geometry, which features only four discrete, "nodal-like" intersection points between opposite-spin conduction channels. This near-complete separation drastically suppresses antiparallel tunneling.
  • Crystallographic orientation matters: The TMR is highly dependent on the direction of current flow. For KV₂Se₂O, transport along the [001] direction yields exceptionally high TMR, while transport along [100] results in lower TMR but higher overall transmission, offering a tunable trade-off.
  • Insulating barriers enhance TMR: Incorporating a symmetry-matched insulating barrier (like PbO) further boosts the TMR by selectively enhancing parallel tunneling while maintaining the suppression of antiparallel tunneling.

Key Results

  • Intrinsic TMR of KV₂Se₂O: With a vacuum barrier, KV₂Se₂O exhibits an intrinsic TMR of 4.3 × 10³.
  • Enhanced TMR with PbO barrier: Using a PbO insulating barrier in a KV₂Se₂O-based MTJ along the [001] direction, the TMR is dramatically increased to 1.1 × 10⁶%. This is orders of magnitude higher than conventional FM MTJs and significantly surpasses previously reported AMTJs.
  • Comparison of materials: V₂Te₂O shows a moderate TMR (18%) due to a larger spin-degenerate continuum. RbV₂Te₂O shows a higher TMR (435%) due to residual spin-degenerate "arcs." KV₂Se₂O's discrete "nodal points" lead to the highest TMR.
  • TMR along different directions: For KV₂Se₂O, TMR along [001] is 1.1 × 10⁶%, while along [100] it is 3.3 × 10³.

Limitations and Future Work

  • Computational study: The results are based on theoretical calculations. Experimental validation of these predicted high TMR values is the crucial next step.
  • Idealized barriers: While realistic insulating barriers were considered, further investigation into the precise interfacial effects and potential complexities of fabricating such junctions is needed.
  • Material discovery: The paper highlights KV₂Se₂O as a promising material, but the principles of flatband engineering could guide the search for other altermagnetic materials with even better performance.
  • Device integration: Translating these findings into practical, scalable spintronic devices will require overcoming fabrication challenges and understanding device reliability.

Summary updated

Abstract

ABSTRACT Altermagnetism, characterized by zero net magnetization and symmetry‐protected spin–split band structures, has recently emerged as a promising platform for spintronics. In altermagnetic tunnel junctions (AMTJs), the suppression of tunneling in the antiparallel configuration relies on the mismatch between spin‐polarized conduction channels in momentum space. However, ideal nonoverlapping spin‐polarized Fermi surfaces are rarely found in bulk altermagnets. Motivated by the critical influence of Fermi surface geometry on tunneling magnetoresistance (TMR), we investigate three experimentally synthesized altermagnets – bulk , , and – to elucidate how flatband‐driven Fermi surfaces minimize spin‐channel overlap and boost AMTJ performance. Notably, and host flat altermagnetic Fermi sheets, which confine spin degeneracy to minimal arc‐like or nodal‐like regions. Such Fermi surface geometry drastically reduces spin overlap, resulting in an unprecedented intrinsic TMR well over in the ‐based AMTJ. Incorporating an insulating barrier further enhances the TMR to , surpassing most conventional MTJs. These results not only establish as a compelling candidate AMTJ material, but also highlight the critical role of flatband Fermi surface geometry in achieving high‐performance altermagnetic‐spintronic device technology.
BibTeX
@inproceedings{yang2026altermagnetic,
  author = {Xingyue Yang and Shibo Fang and Yang Zhang and Pin Ho and Jiangbo Lu and Yee Sin Ang},
  title = {{Altermagnetic Flatband‐Driven Fermi Surface Geometry for Giant Tunneling Magnetoresistance}},
  booktitle = {Advanced},
  year = {2026},
  doi = {10.1002/adfm.202531921},
}
Figure