Air‐Stable Lithiation of MoS2 for Direct‐Bandgap Multilayers

Qi Fu, Yichi Zhang, Jichuang Shen, Seon‐Eui Hong, Jie Wang, Wang Chen, Jingyi Shen, Wei Kong, Guolin Zheng, Jun Yan, J. Wu, Changxi ZhengSmall 2025 · DOI

TL;DR

Researchers have developed a novel nanoprobe-controlled method to lithiate multilayer MoS₂, transforming its indirect bandgap into a direct bandgap. This process significantly enhances photoluminescence (PL) by decoupling interlayer interactions, paving the way for new optoelectronic applications and a versatile platform for ionic engineering in 2D materials.

What Problem Does This Paper Address?

Monolayer molybdenum disulfide (MoS₂) is highly sought after for its direct bandgap and strong light-matter interactions, making it ideal for optoelectronic devices. However, multilayer MoS₂ typically exhibits an indirect bandgap due to strong interlayer coupling, rendering it optically inactive. The challenge has been to find a way to decouple these layers in multilayer MoS₂ to unlock its direct bandgap potential without inducing metallic phases, which often quench PL. Previous attempts at Li intercalation, while promising for tuning electronic properties, often resulted in n-type doping that quenched PL or even transformed the material into a metallic 1T phase. This paper addresses the need for a controlled method to achieve direct-bandgap behavior in multilayer MoS₂ through Li intercalation, leading to enhanced PL.

Methods

The core of this work is a newly developed "Li-ionic platform" that utilizes a nanoprobe-controlled approach for Li intercalation. The setup involves a MoS₂ thin flake deposited on a lithium-ion conducting glass-ceramics (LICGC) substrate, encapsulated by a thin Al₂O₃ dielectric layer.

  • Nanoprobe Lithiation: Atomic Force Microscopy (AFM) with a conductive cantilever acts as the nanoprobe. By applying voltage to the AFM tip, Li ions from the LICGC substrate are driven towards the MoS₂ layer. This process is performed in a dry environment, avoiding the complexities of liquid electrolytes.
  • Tip-Induced Intercalation & Doping Patterning: The AFM tip's voltage polarity and magnitude control the Li ion migration. Positive tip voltage drives Li intercalation, while negative voltage can expel Li ions, effectively erasing doping patterns. This allows for precise, sub-micrometer patterning of Li concentration.
  • Characterization Techniques:
    • Kelvin Probe Force Microscopy (KPFM): Used to visualize the surface potential changes induced by Li intercalation and map doping patterns.
  • Piezoresponse Force Microscopy (PFM): Employed for the lithography process, enabling the writing of arbitrary voltage patterns onto the sample.
  • Raman Spectroscopy (including Ultralow Frequency): Used to probe the structural changes, specifically the interlayer coupling, and confirm the transformation of multilayer MoS₂.
  • Photoluminescence (PL) Spectroscopy: Crucial for assessing the optical properties and confirming the enhancement of light emission due to the direct bandgap.

Datasets

Not discussed in the paper. The study focuses on experimental fabrication and characterization of MoS₂ samples.

Key Insights and Ideas

  • Decoupling Multilayers: Controlled Li intercalation effectively breaks the interlayer coupling in multilayer MoS₂, transforming it into a stack of effectively isolated monolayers. This is a key insight, as it unlocks the direct bandgap behavior without the typical issues of metallic phase transition.
  • Enhanced Photoluminescence: The decoupling of layers leads to a dramatic increase in PL intensity. The paper reports a 26-fold enhancement compared to a monolayer, highlighting the success in achieving strong light-matter interactions in multilayer structures.
  • Air-Stable Ionic Engineering: The Al₂O₃ encapsulation layer provides air stability for the Li-intercalated MoS₂ and the overall platform, allowing for characterization and device operation in ambient conditions.
  • Rewritable and High-Resolution Doping: The nanoprobe approach allows for precise, on-demand doping patterns with a spatial resolution of 517 nm. Furthermore, the doping and intercalation can be reversed, enabling rewritable electronic devices.
  • Distinction from Solution-Based Methods: The dry, tip-induced Li intercalation mechanism is shown to be fundamentally different from solution-based methods, avoiding the common pitfalls of excessive doping or metallic phase transitions.

Key Results

  • Direct Bandgap Transformation: Nanoprobe-controlled Li intercalation successfully transforms multilayer MoS₂ into a state exhibiting a direct bandgap.
  • 26-Fold PL Enhancement: Photoluminescence intensity is enhanced by a factor of 26 compared to a monolayer MoS₂, indicating strong excitonic and trionic emission.
  • 517 nm Doping Resolution: The PFM lithography technique achieves a spatial resolution of 517 nm for doping patterns.
  • Air Stability: The fabricated Li-intercalated MoS₂ structures and the ionic platform demonstrate air stability.
  • Rewritable Electronic Devices: The ability to create and erase doping patterns allows for the fabrication of rewritable electronic devices, with demonstrated switching between high and low resistance states.

Limitations and Future Work

  • Limitations:
    • While the paper demonstrates a significant PL enhancement, the precise quantitative relationship between Li concentration and bandgap modulation could be further explored.
  • The paper mentions a preliminary estimation of charge doping concentration (≈ 3.13 × 10¹² cm⁻²), suggesting that further detailed studies on the exact doping levels and their impact on device performance are warranted.
  • The residual signals after erasing doping patterns, though faint, indicate that complete erasure might require further optimization.
  • Future Work:
    • The authors suggest that this platform is applicable to studying Li-material interactions and developing novel ionic electronics.
  • The direct-bandgap semiconductor properties of the Li-intercalated MoS₂ multilayers offer intriguing possibilities for optoelectronic applications.
  • Further exploration of the mechanism of Li intercalation and its impact on other 2D materials is suggested.
  • The development of more complex, integrated ionic electronic devices based on this technology is a natural next step.

Summary updated

Abstract

Due to its sizable direct bandgap and strong light-matter interactions, the preparation of monolayer MoS<sub>2</sub> has attracted significant attention and intensive research efforts. However, multilayer MoS<sub>2</sub> is largely overlooked because of its optically inactive indirect bandgap caused by interlayer coupling. It is highly desirable to modulate and decrease the interlayer coupling so that each layer in multilayer MoS<sub>2</sub> can exhibit a monolayer-like direct-gap behavior. Herein, the nanoprobe-controlled fabrication of Li<sub>x</sub>MoS<sub>2</sub>-based multilayers is demonstrated, exhibiting a direct bandgap and strong photoluminescence emission from tightly bound excitons and trions. The fabrication of Li<sub>x</sub>MoS<sub>2</sub> multilayers is facilitated by the newly developed Li-ion platform, featuring tip-induced Li intercalation, doping patterning with a spatial resolution of 517 nm, air stability, and rewritability. Ultralow frequency Raman characterizations reveal that controlled Li intercalation effectively transforms multilayer MoS<sub>2</sub> into the stack of multiple monolayers, leading to a 26-fold enhancement of photoluminescence compared to a monolayer. The intercalation result is different from existing observations of transforming MoS<sub>2</sub> multilayers into metallic phases. This work not only provides a highly controllable Li-ionic engineering platform for studying Li-material interactions and developing novel ionic electronics but also offers an intriguing direct-bandgap semiconductor for optoelectronic applications.
BibTeX
@inproceedings{fu2025airstable,
  author = {Qi Fu and Yichi Zhang and Jichuang Shen and Seon‐Eui Hong and Jie Wang and Wang Chen and Jingyi Shen and Wei Kong and Guolin Zheng and Jun Yan and J. Wu and Changxi Zheng},
  title = {{Air‐Stable Lithiation of MoS<sub>2</sub> for Direct‐Bandgap Multilayers}},
  booktitle = {Small},
  year = {2025},
  doi = {10.1002/smsc.202500186},
}
Figure