Air-stable lithiation engineering of $\mathrm{MoS}_{2}$ for direct-bandgap multilayers

Qi Fu, Yichi Zhang, Jichuang Shen, Seon‐Eui Hong, Jie Wang, Wang Chen, Jingyi Shen, Wei Kong, Guolin Zheng, Jun Yan, J. Wu, Changxi ZhengarXiv 2025 · DOI · arXiv

TL;DR

Researchers have developed a "nanoprobe" technique to transform multilayer molybdenum disulfide ($\text{MoS}_2$) from an optically dull material into a high-performance light emitter. By using an AFM tip to precisely intercalate lithium ions, they decoupled the material's layers to create a "stack of monolayers" that exhibits a direct bandgap and a 26-fold increase in photoluminescence compared to a single monolayer.

What Problem Does This Paper Address?

In the world of 2D materials, $\text{MoS}_2$ is a superstar, but only when it’s a single layer thick. As a monolayer, it has a "direct bandgap," meaning it converts electricity to light (and vice versa) very efficiently. However, as soon as you stack layers together to form a multilayer, interlayer coupling shifts the bandgap to "indirect," making the material optically inactive.

While researchers want the higher signal intensity and easier handling of thicker multilayer flakes, they haven't been able to maintain that "monolayer-like" optical performance in bulk. Previous attempts to use lithium (Li) intercalation to decouple these layers often resulted in the material transforming into a metallic phase (1T), which quenches light emission entirely. This paper tackles the challenge of decoupling layers without losing semiconducting properties or air stability.

Methods

The authors developed a novel Li-ion platform consisting of a solid-state lithium-ion conducting glass-ceramic (LICGC) substrate, a flake of $\text{MoS}_2$, and a 27-nm protective alumina ($\text{Al}_2\text{O}_3$) capping layer.

  • Nanoprobe Lithiation: Instead of using liquid electrolytes, they used a conductive Atomic Force Microscopy (AFM) tip. By applying a positive bias to the tip, they created a localized electric field that pulled Li ions from the substrate into the $\text{MoS}_2$ lattice.
  • Precision Patterning: This method allows for "writing" doping patterns with sub-micrometer resolution. They demonstrated this by writing QR codes and university logos into the material.
  • Characterization: They used Kelvin Probe Force Microscopy (KPFM) to visualize surface potential, and Photoluminescence (PL) and Raman spectroscopy to analyze the electronic and structural changes. Specifically, Ultralow Frequency (ULF) Raman spectroscopy was used to prove that the layers were physically decoupled by observing the disappearance of interlayer shear modes.

Datasets

As an experimental physics and materials science paper, this work does not use standard machine learning datasets. The "data" consists of:

  • Experimental Raman and PL spectra.
  • KPFM surface potential maps.
  • Current-voltage (I-V) characteristic curves for the fabricated devices.
  • AFM topography scans.

Key Insights and Ideas

  • The "Stack of Monolayers": The core "aha" moment is that controlled Li intercalation acts as a spacer. It screens the interlayer coupling so effectively that a thick flake behaves like a vertical stack of independent monolayers, each contributing to the total light output.
  • Phase Control: Unlike solution-based lithiation, this dry, tip-induced method avoids the transition to the metallic 1T phase. The material remains a semiconductor, which is essential for light emission.
  • Air Stability & Rewritability: The $\text{Al}_2\text{O}_3$ layer serves a dual purpose: it protects the reactive Li ions from moisture and oxygen (making the device air-stable) and allows the doping process to be reversible. Applying a negative voltage "erases" the doping by pushing Li ions back into the substrate.
  • Doping Neutralization: The authors suggest that the LICGC substrate actually helps neutralize excess n-type doping induced by the Li ions, which prevents the "quenching" of light emission usually seen in intercalated materials.

Key Results

  • 26x PL Enhancement: The Li-intercalated multilayer $\text{MoS}_2$ showed a photoluminescence intensity 26 times stronger than a standard CVD-grown monolayer.
  • Direct Bandgap Confirmation: PL spectra showed strong "A" exciton peaks at 1.86 eV, characteristic of direct-bandgap monolayer behavior.
  • Resolution: The spatial resolution of the doping patterns was measured at approximately 517 nm.
  • Stability: The devices remained stable in air for at least 68 hours without significant degradation in performance.

Limitations and Future Work

  • Substrate Roughness: The authors noted that the inherent roughness of the LICGC substrate made precise AFM height measurements of the intercalation-induced expansion difficult.
  • Residual Signals: While the doping is "erasable," the paper mentions that residual signals intensify with each successive write/erase cycle, suggesting the process isn't perfectly 100% reversible over long durations.
  • Scalability: While the nanoprobe "writing" is excellent for research and prototyping, it is a serial process. Future work would likely need to explore parallel lithography or wide-area field effects to scale this for industrial manufacturing.
  • Material Breadth: The study focused on $\text{MoS}_2$; exploring whether this technique works for other transition metal dichalcogenides (TMDCs) like $\text{WS}_2$ or $\text{WSe}_2$ is a logical next step.

Summary updated

Abstract

Due to its sizable direct bandgap and strong light-matter interactions, the preparation of monolayer $\mathrm{MoS}_{2}$ has attracted significant attention and intensive research efforts. However, multilayer $\mathrm{MoS}_{2}$ is largely overlooked because of its optically inactive indirect bandgap caused by interlayer coupling. It is highly desirable to modulate and decrease the interlayer coupling so that each layer in multilayer $\mathrm{MoS}_{2}$ can exhibit a monolayer-like direct-gap behavior. Here, we demonstrate the nanoprobe fabrication of $\mathrm{Li}_{x}\mathrm{MoS}_{2}$-based multilayers exhibiting a direct bandgap and strong photoluminescence emission from tightly bound excitons and trions. The fabrication is facilitated by our newly developed Li-ion platform, featuring tip-induced Li intercalation, air stability and rewritability. Raman characterizations reveal that controlled Li intercalation effectively transforms multilayer $\mathrm{MoS}_{2}$ into the stack of multiple monolayers, leading to a 26-fold enhancement of photoluminescence, compared to a monolayer. This intercalation result is different from existing observations of transforming $\mathrm{MoS}_{2}$ multilayers into metallic phases.
BibTeX
@misc{fu2025air,
  author = {Qi Fu and Yichi Zhang and Jichuang Shen and Seon‐Eui Hong and Jie Wang and Wang Chen and Jingyi Shen and Wei Kong and Guolin Zheng and Jun Yan and J. Wu and Changxi Zheng},
  title = {{Air-stable lithiation engineering of $\textbackslash\{\}mathrm\{MoS\}\_\{2\}$ for direct-bandgap multilayers}},
  year = {2025},
  eprint = {2503.00474},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2503.00474},
  howpublished = {arXiv},
}
Figure