Affine Frequency Division Multiplexing: Extending OFDM for Scenario-Flexibility and Resilience

Haoran Yin, Yanqun Tang, Ali Bemani, Marios Kountouris, Yu Zhou, Xingyao Zhang, Yuqing Liu, Gaojie Chen, Kai Yang, Fan Liu, Christos Masouros, Yonghui Li, Giuseppe Caire, Pei XiaoarXiv 2025 · DOI · arXiv

Abstract: Next-generation wireless networks are conceived to provide reliable and high-data-rate communication services for diverse scenarios, such as vehicle-to-vehicle, unmanned aerial vehicles, and satellite networks. The severe Doppler spreads in the underlying time-varying channels induce destructive inter-carrier interference (ICI) in the extensively adopted orthogonal frequency division multiplexing (OFDM) waveform, leading to severe performance degradation. This calls for a new air interface design that can accommodate the severe delay-Doppler spreads in highly dynamic channels while possessing sufficient flexibility to cater to various applications. This article provides a comprehensive overview of a promising chirp-based waveform named affine frequency division multiplexing (AFDM). It is featured with two tunable parameters and achieves optimal diversity order in doubly dispersive channels (DDC). We study the fundamental principle of AFDM, illustrating its intrinsic suitability for DDC. Based on that, several potential applications of AFDM are explored. Furthermore, the major challenges and the corresponding solutions of AFDM are presented, followed by several future research directions. Finally, we draw some instructive conclusions about AFDM, hoping to provide useful inspiration for its development.

Introduction

The backbone of current wireless technology (4G/5G) is Orthogonal Frequency Division Multiplexing (OFDM). While OFDM is excellent for static or low-speed scenarios, it fails in "doubly dispersive" channels—environments where signals are distorted by both multi-path delays (echoes) and significant Doppler spreads (frequency shifts caused by high speed). In high-speed train or satellite links, the Doppler effect destroys the orthogonality of OFDM subcarriers, leading to Inter-Carrier Interference (ICI). While newer waveforms like OTFS (Orthogonal Time Frequency Space) have been proposed to fix this, they often come with high computational complexity or significant overhead. Affine Frequency Division Multiplexing (AFDM) emerges as a more flexible, efficient, and backward-compatible solution.

The AFDM Framework

The core innovation of AFDM is the use of the Discrete Affine Fourier Transform (DAFT) instead of the standard Fourier Transform (DFT) used in OFDM. Unlike standard waveforms, AFDM uses "chirps" (signals that change frequency over time) as subcarriers.

System Architecture

AFDM is characterized by two tunable chirp parameters ($c_1$ and $c_2$) that allow engineers to match the waveform to the specific delay-Doppler profile of the environment. By modulating symbols in the DAFT domain, AFDM can represent a complex 2D delay-Doppler channel as a simple 1D pattern. This transformation allows for perfect path separability; if $c_1$ is tuned correctly, every echo and frequency shift lands on a unique, non-overlapping spot in the receiver's domain, making channel estimation remarkably simple.

The AFDM transceiver architecture and its representation in digital and analog time-frequency domains.

Key technical components include:

  • Backward Compatibility: AFDM can be implemented by adding pre-processing and post-processing diagonal matrices around a standard IFFT/FFT block, allowing it to run on existing hardware with minimal changes.
  • Chirp-Periodic Prefix (CPP): A specialized version of the cyclic prefix that maintains the unique periodicity of chirps, ensuring robustness against delay spreads.

Performance and Key Insights

AFDM achieves optimal diversity order, meaning it is exceptionally good at gathering signal energy from all possible paths, making the connection much more fading-resistant than OFDM. Furthermore, the parameters $c_1$ and $c_2$ can act as a physical-layer secret key, as an eavesdropper without the exact configuration would perceive the signal as noise.

Simulation Results

In high-mobility simulations (typically using 512 subcarriers and 6-path channels), AFDM significantly outperforms OFDM and Orthogonal Chirp Division Multiplexing (OCDM). It matches the performance of the more complex OTFS waveform but with lower overhead.

Performance evaluation of AFDM showing (a) pilot/data patterns, (b) NMSE for channel estimation with different pulse shapes, and (c) BER comparison against other waveforms.

As shown in the performance plots, using well-designed windows like Dolph-Chebyshev for pulse shaping drastically reduces errors compared to standard rectangular pulses. Using Embedded Pilot-Aided (EPA) estimation in the DAFT domain, AFDM achieves a much lower Normalized Mean Square Error (NMSE) than traditional methods.

Future Directions and Challenges

While AFDM handles integer Doppler shifts perfectly, "fractional" shifts (shifts that are not exact multiples of subcarrier spacing) still cause some interference. Current research suggests pulse shaping as a primary mitigation strategy. Looking toward 6G, AFDM is a strong candidate for Integrated Sensing and Communication (ISAC), where the same chirp signal is used for both data transfer and radar-like sensing. Future work will also explore "Coded-AFDM" to identify error-correction codes specifically optimized for chirp-based symbols.

Summary updated

Abstract

Next-generation wireless networks are conceived to provide reliable and high-data-rate communication services for diverse scenarios, such as vehicle-to-vehicle, unmanned aerial vehicles, and satellite networks. The severe Doppler spreads in the underlying time-varying channels induce destructive inter-carrier interference (ICI) in the extensively adopted orthogonal frequency division multiplexing (OFDM) waveform, leading to severe performance degradation. This calls for a new air interface design that can accommodate the severe delay-Doppler spreads in highly dynamic channels while possessing sufficient flexibility to cater to various applications. This article provides a comprehensive overview of a promising chirp-based waveform named affine frequency division multiplexing (AFDM). It is featured with two tunable parameters and achieves optimal diversity order in doubly dispersive channels (DDC). We study the fundamental principle of AFDM, illustrating its intrinsic suitability for DDC. Based on that, several potential applications of AFDM are explored. Furthermore, the major challenges and the corresponding solutions of AFDM are presented, followed by several future research directions. Finally, we draw some instructive conclusions about AFDM, hoping to provide useful inspiration for its development.
BibTeX
@misc{yin2025affine,
  author = {Haoran Yin and Yanqun Tang and Ali Bemani and Marios Kountouris and Yu Zhou and Xingyao Zhang and Yuqing Liu and Gaojie Chen and Kai Yang and Fan Liu and Christos Masouros and Yonghui Li and Giuseppe Caire and Pei Xiao},
  title = {{Affine Frequency Division Multiplexing: Extending OFDM for Scenario-Flexibility and Resilience}},
  year = {2025},
  eprint = {2502.04735},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2502.04735},
  howpublished = {arXiv},
}
Figure